[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c66846c6-d5d6-4d4d-98d4-ffb907521c09@linaro.org>
Date: Wed, 5 Jun 2024 10:46:13 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Christian Hewitt <christianshewitt@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: meson: add GXLX/S905L/p271 support
On 04/06/2024 10:41, Christian Hewitt wrote:
> Add a device-tree for the GXLX Amlogic P271 (S905L) reference design
> board. This is a low-cost design similar to P281 (S905W) but with
> silicon differences to omit VP9 and use Mali 450-MP2 (not MP3). The
> SoC is marked with S905L and "2" (believed to denote MP2) resulting
> in chip distributor stock lists and Android STB marketing sometimes
> describing it as an S905L2 chip.
>
> Signed-off-by: Christian Hewitt <christianshewitt@...il.com>
> ---
> NOTE: This patch depends upon the following submitted patches for
> VDEC [0] and SARADC [1] support:
>
> [0] https://patchwork.kernel.org/project/linux-amlogic/list/?series=858514
> [1] https://patchwork.kernel.org/project/linux-amlogic/list/?series=858525
>
> CHECK_DTBS generates some warnings for pre-existing issues inherited
> from common dtsi files. The patch does not add any new issues.
>
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../dts/amlogic/meson-gxlx-s905l-p271.dts | 51 +++++++++++++++++++
> 2 files changed, 52 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 0f29517da5ec..0746e01b5853 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxlx-s905l-p271.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
> new file mode 100644
> index 000000000000..1221f4545130
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Christian Hewitt <christianshewitt@...il.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxl-s905x.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +
> +/ {
> + compatible = "amlogic,p271", "amlogic,s905l", "amlogic,meson-gxlx";
> + model = "Amlogic Meson GXLX (S905L) P271 Development Board";
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x40000000>;
> + };
> +
> + sound {
> + model = "P271";
> + };
> +};
> +
> +&apb {
> + mali: gpu@...00 {
> + /* Mali 450-MP2 */
> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "gp", "gpmmu", "pp", "pmu",
> + "pp0", "ppmmu0", "pp1", "ppmmu1";
> + };
> +};
> +
> +&saradc {
> + compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
> +};
> +
> +&usb {
> + dr_mode = "host";
> +};
> +
> +&vdec {
> + compatible = "amlogic,gxlx-vdec", "amlogic,gx-vdec";
> +};
Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists