[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <560d5efc-11fd-4ce6-a1e9-c4657e61d9b9@intel.com>
Date: Wed, 5 Jun 2024 13:18:13 +0200
From: Wojciech Drewek <wojciech.drewek@...el.com>
To: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>, <netdev@...r.kernel.org>
CC: <davem@...emloft.net>, <kuba@...nel.org>, <linux-kernel@...r.kernel.org>,
<bryan.whitehead@...rochip.com>, <andrew@...n.ch>, <linux@...linux.org.uk>,
<sbauer@...ckbox.su>, <hmehrtens@...linear.com>, <lxu@...linear.com>,
<hkallweit1@...il.com>, <edumazet@...gle.com>, <pabeni@...hat.com>,
<UNGLinuxDriver@...rochip.com>
Subject: Re: [PATCH net V3 1/3] net: lan743x: disable WOL upon resume to
restore full data path operation
On 05.06.2024 12:16, Raju Lakkaraju wrote:
> When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering
> a system event can wake the system from sleep, which may block the data path.
> To restore normal data path functionality after waking, disable all wake-up
> events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing
> 1's to them.
>
> Fixes: 4d94282afd95 ("lan743x: Add power management support")
> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>
> ---
Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>
> Change List:
> ------------
> V2 -> V3:
> - No change
> V1 -> V2:
> - Repost - No change
> V0 -> V1:
> - Variable "data" change from "int" to "unsigned int"
>
> drivers/net/ethernet/microchip/lan743x_main.c | 30 ++++++++++++++++---
> drivers/net/ethernet/microchip/lan743x_main.h | 24 +++++++++++++++
> 2 files changed, 50 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
> index 6be8a43c908a..6a40b961fafb 100644
> --- a/drivers/net/ethernet/microchip/lan743x_main.c
> +++ b/drivers/net/ethernet/microchip/lan743x_main.c
> @@ -3575,7 +3575,7 @@ static void lan743x_pm_set_wol(struct lan743x_adapter *adapter)
>
> /* clear wake settings */
> pmtctl = lan743x_csr_read(adapter, PMT_CTL);
> - pmtctl |= PMT_CTL_WUPS_MASK_;
> + pmtctl |= PMT_CTL_WUPS_MASK_ | PMT_CTL_RES_CLR_WKP_MASK_;
> pmtctl &= ~(PMT_CTL_GPIO_WAKEUP_EN_ | PMT_CTL_EEE_WAKEUP_EN_ |
> PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_ |
> PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_ | PMT_CTL_ETH_PHY_WAKE_EN_);
> @@ -3710,6 +3710,7 @@ static int lan743x_pm_resume(struct device *dev)
> struct pci_dev *pdev = to_pci_dev(dev);
> struct net_device *netdev = pci_get_drvdata(pdev);
> struct lan743x_adapter *adapter = netdev_priv(netdev);
> + u32 data;
> int ret;
>
> pci_set_power_state(pdev, PCI_D0);
> @@ -3728,6 +3729,30 @@ static int lan743x_pm_resume(struct device *dev)
> return ret;
> }
>
> + ret = lan743x_csr_read(adapter, MAC_WK_SRC);
> + netif_info(adapter, drv, adapter->netdev,
> + "Wakeup source : 0x%08X\n", ret);
> +
> + /* Clear the wol configuration and status bits. Note that
> + * the status bits are "Write One to Clear (W1C)"
> + */
> + data = MAC_WUCSR_EEE_TX_WAKE_ | MAC_WUCSR_EEE_RX_WAKE_ |
> + MAC_WUCSR_RFE_WAKE_FR_ | MAC_WUCSR_PFDA_FR_ | MAC_WUCSR_WUFR_ |
> + MAC_WUCSR_MPR_ | MAC_WUCSR_BCAST_FR_;
> + lan743x_csr_write(adapter, MAC_WUCSR, data);
> +
> + data = MAC_WUCSR2_NS_RCD_ | MAC_WUCSR2_ARP_RCD_ |
> + MAC_WUCSR2_IPV6_TCPSYN_RCD_ | MAC_WUCSR2_IPV4_TCPSYN_RCD_;
> + lan743x_csr_write(adapter, MAC_WUCSR2, data);
> +
> + data = MAC_WK_SRC_ETH_PHY_WK_ | MAC_WK_SRC_IPV6_TCPSYN_RCD_WK_ |
> + MAC_WK_SRC_IPV4_TCPSYN_RCD_WK_ | MAC_WK_SRC_EEE_TX_WK_ |
> + MAC_WK_SRC_EEE_RX_WK_ | MAC_WK_SRC_RFE_FR_WK_ |
> + MAC_WK_SRC_PFDA_FR_WK_ | MAC_WK_SRC_MP_FR_WK_ |
> + MAC_WK_SRC_BCAST_FR_WK_ | MAC_WK_SRC_WU_FR_WK_ |
> + MAC_WK_SRC_WK_FR_SAVED_;
> + lan743x_csr_write(adapter, MAC_WK_SRC, data);
> +
> /* open netdev when netdev is at running state while resume.
> * For instance, it is true when system wakesup after pm-suspend
> * However, it is false when system wakes up after suspend GUI menu
> @@ -3736,9 +3761,6 @@ static int lan743x_pm_resume(struct device *dev)
> lan743x_netdev_open(netdev);
>
> netif_device_attach(netdev);
> - ret = lan743x_csr_read(adapter, MAC_WK_SRC);
> - netif_info(adapter, drv, adapter->netdev,
> - "Wakeup source : 0x%08X\n", ret);
>
> return 0;
> }
> diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
> index 645bc048e52e..fac0f33d10b2 100644
> --- a/drivers/net/ethernet/microchip/lan743x_main.h
> +++ b/drivers/net/ethernet/microchip/lan743x_main.h
> @@ -61,6 +61,7 @@
> #define PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_ BIT(18)
> #define PMT_CTL_GPIO_WAKEUP_EN_ BIT(15)
> #define PMT_CTL_EEE_WAKEUP_EN_ BIT(13)
> +#define PMT_CTL_RES_CLR_WKP_MASK_ GENMASK(9, 8)
> #define PMT_CTL_READY_ BIT(7)
> #define PMT_CTL_ETH_PHY_RST_ BIT(4)
> #define PMT_CTL_WOL_EN_ BIT(3)
> @@ -227,12 +228,31 @@
> #define MAC_WUCSR (0x140)
> #define MAC_MP_SO_EN_ BIT(21)
> #define MAC_WUCSR_RFE_WAKE_EN_ BIT(14)
> +#define MAC_WUCSR_EEE_TX_WAKE_ BIT(13)
> +#define MAC_WUCSR_EEE_RX_WAKE_ BIT(11)
> +#define MAC_WUCSR_RFE_WAKE_FR_ BIT(9)
> +#define MAC_WUCSR_PFDA_FR_ BIT(7)
> +#define MAC_WUCSR_WUFR_ BIT(6)
> +#define MAC_WUCSR_MPR_ BIT(5)
> +#define MAC_WUCSR_BCAST_FR_ BIT(4)
> #define MAC_WUCSR_PFDA_EN_ BIT(3)
> #define MAC_WUCSR_WAKE_EN_ BIT(2)
> #define MAC_WUCSR_MPEN_ BIT(1)
> #define MAC_WUCSR_BCST_EN_ BIT(0)
>
> #define MAC_WK_SRC (0x144)
> +#define MAC_WK_SRC_ETH_PHY_WK_ BIT(17)
> +#define MAC_WK_SRC_IPV6_TCPSYN_RCD_WK_ BIT(16)
> +#define MAC_WK_SRC_IPV4_TCPSYN_RCD_WK_ BIT(15)
> +#define MAC_WK_SRC_EEE_TX_WK_ BIT(14)
> +#define MAC_WK_SRC_EEE_RX_WK_ BIT(13)
> +#define MAC_WK_SRC_RFE_FR_WK_ BIT(12)
> +#define MAC_WK_SRC_PFDA_FR_WK_ BIT(11)
> +#define MAC_WK_SRC_MP_FR_WK_ BIT(10)
> +#define MAC_WK_SRC_BCAST_FR_WK_ BIT(9)
> +#define MAC_WK_SRC_WU_FR_WK_ BIT(8)
> +#define MAC_WK_SRC_WK_FR_SAVED_ BIT(7)
> +
> #define MAC_MP_SO_HI (0x148)
> #define MAC_MP_SO_LO (0x14C)
>
> @@ -295,6 +315,10 @@
> #define RFE_INDX(index) (0x580 + (index << 2))
>
> #define MAC_WUCSR2 (0x600)
> +#define MAC_WUCSR2_NS_RCD_ BIT(7)
> +#define MAC_WUCSR2_ARP_RCD_ BIT(6)
> +#define MAC_WUCSR2_IPV6_TCPSYN_RCD_ BIT(5)
> +#define MAC_WUCSR2_IPV4_TCPSYN_RCD_ BIT(4)
>
> #define SGMII_ACC (0x720)
> #define SGMII_ACC_SGMII_BZY_ BIT(31)
Powered by blists - more mailing lists