linux-kernel - Re: [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <05146417-c29b-41f4-89ac-bc9e1af2cee7@intel.com>
Date: Wed, 5 Jun 2024 13:24:50 +0200
From: Wojciech Drewek <wojciech.drewek@...el.com>
To: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>, <netdev@...r.kernel.org>
CC: <davem@...emloft.net>, <kuba@...nel.org>, <linux-kernel@...r.kernel.org>,
	<bryan.whitehead@...rochip.com>, <andrew@...n.ch>, <linux@...linux.org.uk>,
	<sbauer@...ckbox.su>, <hmehrtens@...linear.com>, <lxu@...linear.com>,
	<hkallweit1@...il.com>, <edumazet@...gle.com>, <pabeni@...hat.com>,
	<UNGLinuxDriver@...rochip.com>
Subject: Re: [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask
 clearing from config_init



On 05.06.2024 12:16, Raju Lakkaraju wrote:
> When the system resumes from sleep, the phy_init_hw() function invokes
> config_init(), which clears all interrupt masks and causes wake events to be
> lost in subsequent wake sequences. Remove interrupt mask clearing from
> config_init() and preserve relevant masks in config_intr()
> 
> Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>
> ---

One nit, other than that:
Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>

> Change List:                                                                    
> ------------                                                                    
> V0 -> V3:
>   - Address the https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@lunn.ch/T/
>     review comments
>   
>  drivers/net/phy/mxl-gpy.c | 58 +++++++++++++++++++++++++--------------
>  1 file changed, 38 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
> index b2d36a3a96f1..e5f8ac4b4604 100644
> --- a/drivers/net/phy/mxl-gpy.c
> +++ b/drivers/net/phy/mxl-gpy.c
> @@ -107,6 +107,7 @@ struct gpy_priv {
>  
>  	u8 fw_major;
>  	u8 fw_minor;
> +	u32 wolopts;
>  
>  	/* It takes 3 seconds to fully switch out of loopback mode before
>  	 * it can safely re-enter loopback mode. Record the time when
> @@ -221,6 +222,15 @@ static int gpy_hwmon_register(struct phy_device *phydev)
>  }
>  #endif
>  
> +static int gpy_ack_interrupt(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	/* Clear all pending interrupts */
> +	ret = phy_read(phydev, PHY_ISTAT);
> +	return ret < 0 ? ret : 0;

Can we just return phy_read?

> +}
> +
>  static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
>  {
>  	struct gpy_priv *priv = phydev->priv;
> @@ -262,16 +272,8 @@ static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
>  
>  static int gpy_config_init(struct phy_device *phydev)
>  {
> -	int ret;
> -
> -	/* Mask all interrupts */
> -	ret = phy_write(phydev, PHY_IMASK, 0);
> -	if (ret)
> -		return ret;
> -
> -	/* Clear all pending interrupts */
> -	ret = phy_read(phydev, PHY_ISTAT);
> -	return ret < 0 ? ret : 0;
> +	/* Nothing to configure. Configuration Requirement Placeholder */
> +	return 0;
>  }
>  
>  static int gpy21x_config_init(struct phy_device *phydev)
> @@ -627,11 +629,23 @@ static int gpy_read_status(struct phy_device *phydev)
>  
>  static int gpy_config_intr(struct phy_device *phydev)
>  {
> +	struct gpy_priv *priv = phydev->priv;
>  	u16 mask = 0;
> +	int ret;
> +
> +	ret = gpy_ack_interrupt(phydev);
> +	if (ret)
> +		return ret;
>  
>  	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
>  		mask = PHY_IMASK_MASK;
>  
> +	if (priv->wolopts & WAKE_MAGIC)
> +		mask |= PHY_IMASK_WOL;
> +
> +	if (priv->wolopts & WAKE_PHY)
> +		mask |= PHY_IMASK_LSTC;
> +
>  	return phy_write(phydev, PHY_IMASK, mask);
>  }
>  
> @@ -678,6 +692,7 @@ static int gpy_set_wol(struct phy_device *phydev,
>  		       struct ethtool_wolinfo *wol)
>  {
>  	struct net_device *attach_dev = phydev->attached_dev;
> +	struct gpy_priv *priv = phydev->priv;
>  	int ret;
>  
>  	if (wol->wolopts & WAKE_MAGIC) {
> @@ -725,6 +740,8 @@ static int gpy_set_wol(struct phy_device *phydev,
>  		ret = phy_read(phydev, PHY_ISTAT);
>  		if (ret < 0)
>  			return ret;
> +
> +		priv->wolopts |= WAKE_MAGIC;
>  	} else {
>  		/* Disable magic packet matching */
>  		ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
> @@ -732,6 +749,13 @@ static int gpy_set_wol(struct phy_device *phydev,
>  					 WOL_EN);
>  		if (ret < 0)
>  			return ret;
> +
> +		/* Disable the WOL interrupt */
> +		ret = phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_WOL);
> +		if (ret < 0)
> +			return ret;
> +
> +		priv->wolopts &= ~WAKE_MAGIC;
>  	}
>  
>  	if (wol->wolopts & WAKE_PHY) {
> @@ -748,9 +772,11 @@ static int gpy_set_wol(struct phy_device *phydev,
>  		if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
>  			phy_trigger_machine(phydev);
>  
> +		priv->wolopts |= WAKE_PHY;
>  		return 0;
>  	}
>  
> +	priv->wolopts &= ~WAKE_PHY;
>  	/* Disable the link state change interrupt */
>  	return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
>  }
> @@ -758,18 +784,10 @@ static int gpy_set_wol(struct phy_device *phydev,
>  static void gpy_get_wol(struct phy_device *phydev,
>  			struct ethtool_wolinfo *wol)
>  {
> -	int ret;
> +	struct gpy_priv *priv = phydev->priv;
>  
>  	wol->supported = WAKE_MAGIC | WAKE_PHY;
> -	wol->wolopts = 0;
> -
> -	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
> -	if (ret & WOL_EN)
> -		wol->wolopts |= WAKE_MAGIC;
> -
> -	ret = phy_read(phydev, PHY_IMASK);
> -	if (ret & PHY_IMASK_LSTC)
> -		wol->wolopts |= WAKE_PHY;
> +	wol->wolopts = priv->wolopts;
>  }
>  
>  static int gpy_loopback(struct phy_device *phydev, bool enable)