lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240605115518.2964670-3-sashal@kernel.org>
Date: Wed,  5 Jun 2024 07:55:11 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Mario Limonciello <mario.limonciello@....com>,
	Eric Heintzmann <heintzmann.eric@...e.fr>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Sasha Levin <sashal@...nel.org>,
	linux-pci@...r.kernel.org
Subject: [PATCH AUTOSEL 4.19 3/4] PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports

From: Mario Limonciello <mario.limonciello@....com>

[ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ]

Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU.  Attempting to use the dGPU fails
with the following sequence:

  ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
  radeon 0000:01:00.0: not ready 1023ms after resume; waiting
  radeon 0000:01:00.0: not ready 2047ms after resume; waiting
  radeon 0000:01:00.0: not ready 4095ms after resume; waiting
  radeon 0000:01:00.0: not ready 8191ms after resume; waiting
  radeon 0000:01:00.0: not ready 16383ms after resume; waiting
  radeon 0000:01:00.0: not ready 32767ms after resume; waiting
  radeon 0000:01:00.0: not ready 65535ms after resume; giving up
  radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible

The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.

The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe.  This would nominally work for
an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.

Add the system to bridge_d3_blacklist to prevent D3cold from being used.

Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com
Reported-by: Eric Heintzmann <heintzmann.eric@...e.fr>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
Signed-off-by: Mario Limonciello <mario.limonciello@....com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Tested-by: Eric Heintzmann <heintzmann.eric@...e.fr>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/pci/pci.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 2ac400adaee11..4f229cb5d2a9f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2530,6 +2530,18 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"),
 		},
 	},
+	{
+		/*
+		 * Changing power state of root port dGPU is connected fails
+		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
+		 */
+		.ident = "Hewlett-Packard HP Pavilion 17 Notebook PC/1972",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_BOARD_NAME, "1972"),
+			DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
+		},
+	},
 #endif
 	{ }
 };
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ