Message-ID: <d80029e2-b9a1-4bbe-9df0-b9ddd565c920@gmx.de>
Date: Fri, 7 Jun 2024 17:55:02 +0200
From: Armin Wolf <W_Armin@....de>
To: Guenter Roeck <linux@...ck-us.net>, linux-hwmon@...r.kernel.org
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
 devicetree@...r.kernel.org, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Wolfram Sang <wsa+renesas@...g-engineering.com>,
 René Rebe <rene@...ctcode.de>,
 Thomas Weißschuh <linux@...ssschuh.net>,
 Stephen Horvath <s.horvath@...look.com.au>
Subject: Re: [PATCH v4 2/6] hwmon: Add support for SPD5118 compliant
 temperature sensors

Am 04.06.24 um 06:02 schrieb Guenter Roeck:

> Add support for SPD5118 (Jedec JESD300) compliant temperature
> sensors. Such sensors are typically found on DDR5 memory modules.

Tested-by: Armin Wolf <W_Armin@....de>

> Cc: René Rebe <rene@...ctcode.de>
> Cc: Thomas Weißschuh <linux@...ssschuh.net>
> Reviewed-by: Thomas Weißschuh <linux@...ssschuh.net>
> Tested-by: Thomas Weißschuh <linux@...ssschuh.net>
> Signed-off-by: Guenter Roeck <linux@...ck-us.net>
> ---
> v4: No change
>
> v3: Shorten JESD300-5B.01 to JESD300; 5B.01 refers to the version
>      of the standard
>      Drop unnecessary 'attr' parameter from spd5118_{read,write}_enable()
>
> v2: Drop PEC property documentation
>      Add note indicating that alarm attributes are sticky until read
>      to documentation
>      Fix detect function
>      Fix misspelling in Makefile (CONFIG_SENSORS_SPD5118->CONFIG_SENSORS_SPD5118)
>
>   Documentation/hwmon/index.rst   |   1 +
>   Documentation/hwmon/spd5118.rst |  55 ++++
>   drivers/hwmon/Kconfig           |  12 +
>   drivers/hwmon/Makefile          |   1 +
>   drivers/hwmon/spd5118.c         | 481 ++++++++++++++++++++++++++++++++
>   5 files changed, 550 insertions(+)
>   create mode 100644 Documentation/hwmon/spd5118.rst
>   create mode 100644 drivers/hwmon/spd5118.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 03d313af469a..6e7b8726b60c 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -215,6 +215,7 @@ Hardware Monitoring Kernel Drivers
>      smsc47m192
>      smsc47m1
>      sparx5-temp
> +   spd5118
>      stpddc60
>      surface_fan
>      sy7636a-hwmon
> diff --git a/Documentation/hwmon/spd5118.rst b/Documentation/hwmon/spd5118.rst
> new file mode 100644
> index 000000000000..a15d75aa2066
> --- /dev/null
> +++ b/Documentation/hwmon/spd5118.rst
> @@ -0,0 +1,55 @@
> +.. SPDX-License-Identifier: GPL-2.0-or-later
> +
> +Kernel driver spd5118
> +=====================
> +
> +Supported chips:
> +
> +  * SPD5118 (JEDEC JESD300) compliant temperature sensor chips
> +
> +    JEDEC standard download:
> +	https://www.jedec.org/standards-documents/docs/jesd300-5b01
> +	(account required)
> +
> +
> +    Prefix: 'spd5118'
> +
> +    Addresses scanned: I2C 0x50 - 0x57
> +
> +Author:
> +	Guenter Roeck <linux@...ck-us.net>
> +
> +
> +Description
> +-----------
> +
> +This driver implements support for SPD5118 (JEDEC JESD300) compliant temperature
> +sensors, which are used on many DDR5 memory modules. Some systems use the sensor
> +to prevent memory overheating by automatically throttling the memory controller.
> +
> +The driver auto-detects SPD5118 compliant chips, but can also be instantiated
> +using devicetree/firmware nodes.
> +
> +A SPD5118 compliant chip supports a single temperature sensor. Critical minimum,
> +minimum, maximum, and critical temperature can be configured. There are alarms
> +for low critical, low, high, and critical thresholds.
> +
> +
> +Hardware monitoring sysfs entries
> +---------------------------------
> +
> +======================= ==================================
> +temp1_input		Temperature (RO)
> +temp1_lcrit		Low critical high temperature (RW)
> +temp1_min		Minimum temperature (RW)
> +temp1_max		Maximum temperature (RW)
> +temp1_crit		Critical high temperature (RW)
> +
> +temp1_lcrit_alarm	Temperature low critical alarm
> +temp1_min_alarm		Temperature low alarm
> +temp1_max_alarm		Temperature high alarm
> +temp1_crit_alarm	Temperature critical alarm
> +======================= ==================================
> +
> +Alarm attributes are sticky until read and will be cleared afterwards
> +unless the alarm condition still applies.
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e14ae18a973b..7a84e7637b51 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2181,6 +2181,18 @@ config SENSORS_INA3221
>   	  This driver can also be built as a module. If so, the module
>   	  will be called ina3221.
>
> +config SENSORS_SPD5118
> +	tristate "SPD5118 Compliant Temperature Sensors"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  If you say yes here you get support for SPD5118 (JEDEC JESD300)
> +	  compliant temperature sensors. Such sensors are found on DDR5 memory
> +	  modules.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called spd5118.
> +
>   config SENSORS_TC74
>   	tristate "Microchip TC74"
>   	depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index e3f25475d1f0..6574ca67d761 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -207,6 +207,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
>   obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
>   obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
>   obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
> +obj-$(CONFIG_SENSORS_SPD5118)	+= spd5118.o
>   obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
>   obj-$(CONFIG_SENSORS_SURFACE_FAN)+= surface_fan.o
>   obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
> diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c
> new file mode 100644
> index 000000000000..d3fc0ae17743
> --- /dev/null
> +++ b/drivers/hwmon/spd5118.c
> @@ -0,0 +1,481 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Driver for Jedec 5118 compliant temperature sensors
> + *
> + * Derived from https://github.com/Steve-Tech/SPD5118-DKMS
> + * Originally from T/2 driver at https://t2sde.org/packages/linux
> + *	Copyright (c) 2023 René Rebe, ExactCODE GmbH; Germany.
> + *
> + * Copyright (c) 2024 Guenter Roeck
> + *
> + * Inspired by ee1004.c and jc42.c.
> + *
> + * SPD5118 compliant temperature sensors are typically used on DDR5
> + * memory modules.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/bits.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/hwmon.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/units.h>
> +
> +/* Addresses to scan */
> +static const unsigned short normal_i2c[] = {
> +	0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, I2C_CLIENT_END };
> +
> +/* SPD5118 registers. */
> +#define SPD5118_REG_TYPE		0x00	/* MR0:MR1 */
> +#define SPD5118_REG_REVISION		0x02	/* MR2 */
> +#define SPD5118_REG_VENDOR		0x03	/* MR3:MR4 */
> +#define SPD5118_REG_CAPABILITY		0x05	/* MR5 */
> +#define SPD5118_REG_I2C_LEGACY_MODE	0x0B	/* MR11 */
> +#define SPD5118_REG_TEMP_CLR		0x13	/* MR19 */
> +#define SPD5118_REG_ERROR_CLR		0x14	/* MR20 */
> +#define SPD5118_REG_TEMP_CONFIG		0x1A	/* MR26 */
> +#define SPD5118_REG_TEMP_MAX		0x1c	/* MR28:MR29 */
> +#define SPD5118_REG_TEMP_MIN		0x1e	/* MR30:MR31 */
> +#define SPD5118_REG_TEMP_CRIT		0x20	/* MR32:MR33 */
> +#define SPD5118_REG_TEMP_LCRIT		0x22	/* MR34:MR35 */
> +#define SPD5118_REG_TEMP		0x31	/* MR49:MR50 */
> +#define SPD5118_REG_TEMP_STATUS		0x33	/* MR51 */
> +
> +#define SPD5118_TEMP_STATUS_HIGH	BIT(0)
> +#define SPD5118_TEMP_STATUS_LOW		BIT(1)
> +#define SPD5118_TEMP_STATUS_CRIT	BIT(2)
> +#define SPD5118_TEMP_STATUS_LCRIT	BIT(3)
> +
> +#define SPD5118_CAP_TS_SUPPORT		BIT(1)	/* temperature sensor support */
> +
> +#define SPD5118_TS_DISABLE		BIT(0)	/* temperature sensor disable */
> +
> +/* Temperature unit in millicelsius */
> +#define SPD5118_TEMP_UNIT		(MILLIDEGREE_PER_DEGREE / 4)
> +/* Representable temperature range in millicelsius */
> +#define SPD5118_TEMP_RANGE_MIN		-256000
> +#define SPD5118_TEMP_RANGE_MAX		255750
> +
> +static int spd5118_temp_from_reg(u16 reg)
> +{
> +	int temp = sign_extend32(reg >> 2, 10);
> +
> +	return temp * SPD5118_TEMP_UNIT;
> +}
> +
> +static u16 spd5118_temp_to_reg(long temp)
> +{
> +	temp = clamp_val(temp, SPD5118_TEMP_RANGE_MIN, SPD5118_TEMP_RANGE_MAX);
> +	return (DIV_ROUND_CLOSEST(temp, SPD5118_TEMP_UNIT) & 0x7ff) << 2;
> +}
> +
> +static int spd5118_read_temp(struct regmap *regmap, u32 attr, long *val)
> +{
> +	int reg, err;
> +	u8 regval[2];
> +	u16 temp;
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		reg = SPD5118_REG_TEMP;
> +		break;
> +	case hwmon_temp_max:
> +		reg = SPD5118_REG_TEMP_MAX;
> +		break;
> +	case hwmon_temp_min:
> +		reg = SPD5118_REG_TEMP_MIN;
> +		break;
> +	case hwmon_temp_crit:
> +		reg = SPD5118_REG_TEMP_CRIT;
> +		break;
> +	case hwmon_temp_lcrit:
> +		reg = SPD5118_REG_TEMP_LCRIT;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	err = regmap_bulk_read(regmap, reg, regval, 2);
> +	if (err)
> +		return err;
> +
> +	temp = (regval[1] << 8) | regval[0];
> +
> +	*val = spd5118_temp_from_reg(temp);
> +	return 0;
> +}
> +
> +static int spd5118_read_alarm(struct regmap *regmap, u32 attr, long *val)
> +{
> +	unsigned int mask, regval;
> +	int err;
> +
> +	switch (attr) {
> +	case hwmon_temp_max_alarm:
> +		mask = SPD5118_TEMP_STATUS_HIGH;
> +		break;
> +	case hwmon_temp_min_alarm:
> +		mask = SPD5118_TEMP_STATUS_LOW;
> +		break;
> +	case hwmon_temp_crit_alarm:
> +		mask = SPD5118_TEMP_STATUS_CRIT;
> +		break;
> +	case hwmon_temp_lcrit_alarm:
> +		mask = SPD5118_TEMP_STATUS_LCRIT;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	err = regmap_read(regmap, SPD5118_REG_TEMP_STATUS, &regval);
> +	if (err < 0)
> +		return err;
> +	*val = !!(regval & mask);
> +	if (*val)
> +		return regmap_write(regmap, SPD5118_REG_TEMP_CLR, mask);
> +	return 0;
> +}
> +
> +static int spd5118_read_enable(struct regmap *regmap, long *val)
> +{
> +	u32 regval;
> +	int err;
> +
> +	err = regmap_read(regmap, SPD5118_REG_TEMP_CONFIG, &regval);
> +	if (err < 0)
> +		return err;
> +	*val = !(regval & SPD5118_TS_DISABLE);
> +	return 0;
> +}
> +
> +static int spd5118_read(struct device *dev, enum hwmon_sensor_types type,
> +			u32 attr, int channel, long *val)
> +{
> +	struct regmap *regmap = dev_get_drvdata(dev);
> +
> +	if (type != hwmon_temp)
> +		return -EOPNOTSUPP;
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +	case hwmon_temp_max:
> +	case hwmon_temp_min:
> +	case hwmon_temp_crit:
> +	case hwmon_temp_lcrit:
> +		return spd5118_read_temp(regmap, attr, val);
> +	case hwmon_temp_max_alarm:
> +	case hwmon_temp_min_alarm:
> +	case hwmon_temp_crit_alarm:
> +	case hwmon_temp_lcrit_alarm:
> +		return spd5118_read_alarm(regmap, attr, val);
> +	case hwmon_temp_enable:
> +		return spd5118_read_enable(regmap, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int spd5118_write_temp(struct regmap *regmap, u32 attr, long val)
> +{
> +	u8 regval[2];
> +	u16 temp;
> +	int reg;
> +
> +	switch (attr) {
> +	case hwmon_temp_max:
> +		reg = SPD5118_REG_TEMP_MAX;
> +		break;
> +	case hwmon_temp_min:
> +		reg = SPD5118_REG_TEMP_MIN;
> +		break;
> +	case hwmon_temp_crit:
> +		reg = SPD5118_REG_TEMP_CRIT;
> +		break;
> +	case hwmon_temp_lcrit:
> +		reg = SPD5118_REG_TEMP_LCRIT;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	temp = spd5118_temp_to_reg(val);
> +	regval[0] = temp & 0xff;
> +	regval[1] = temp >> 8;
> +
> +	return regmap_bulk_write(regmap, reg, regval, 2);
> +}
> +
> +static int spd5118_write_enable(struct regmap *regmap, long val)
> +{
> +	if (val && val != 1)
> +		return -EINVAL;
> +
> +	return regmap_update_bits(regmap, SPD5118_REG_TEMP_CONFIG,
> +				  SPD5118_TS_DISABLE,
> +				  val ? 0 : SPD5118_TS_DISABLE);
> +}
> +
> +static int spd5118_temp_write(struct regmap *regmap, u32 attr, long val)
> +{
> +	switch (attr) {
> +	case hwmon_temp_max:
> +	case hwmon_temp_min:
> +	case hwmon_temp_crit:
> +	case hwmon_temp_lcrit:
> +		return spd5118_write_temp(regmap, attr, val);
> +	case hwmon_temp_enable:
> +		return spd5118_write_enable(regmap, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int spd5118_write(struct device *dev, enum hwmon_sensor_types type,
> +			 u32 attr, int channel, long val)
> +{
> +	struct regmap *regmap = dev_get_drvdata(dev);
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		return spd5118_temp_write(regmap, attr, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t spd5118_is_visible(const void *_data, enum hwmon_sensor_types type,
> +				  u32 attr, int channel)
> +{
> +	if (type != hwmon_temp)
> +		return 0;
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		return 0444;
> +	case hwmon_temp_min:
> +	case hwmon_temp_max:
> +	case hwmon_temp_lcrit:
> +	case hwmon_temp_crit:
> +	case hwmon_temp_enable:
> +		return 0644;
> +	case hwmon_temp_min_alarm:
> +	case hwmon_temp_max_alarm:
> +	case hwmon_temp_crit_alarm:
> +	case hwmon_temp_lcrit_alarm:
> +		return 0444;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static inline bool spd5118_parity8(u8 w)
> +{
> +	w ^= w >> 4;
> +	return (0x6996 >> (w & 0xf)) & 1;
> +}
> +
> +/*
> + * Bank and vendor id are 8-bit fields with seven data bits and odd parity.
> + * Vendor IDs 0 and 0x7f are invalid.
> + * See Jedec standard JEP106BJ for details and a list of assigned vendor IDs.
> + */
> +static bool spd5118_vendor_valid(u8 bank, u8 id)
> +{
> +	if (!spd5118_parity8(bank) || !spd5118_parity8(id))
> +		return false;
> +
> +	id &= 0x7f;
> +	return id && id != 0x7f;
> +}
> +
> +/* Return 0 if detection is successful, -ENODEV otherwise */
> +static int spd5118_detect(struct i2c_client *client, struct i2c_board_info *info)
> +{
> +	struct i2c_adapter *adapter = client->adapter;
> +	int regval;
> +
> +	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> +				     I2C_FUNC_SMBUS_WORD_DATA))
> +		return -ENODEV;
> +
> +	regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE);
> +	if (regval != 0x5118)
> +		return -ENODEV;
> +
> +	regval = i2c_smbus_read_word_data(client, SPD5118_REG_VENDOR);
> +	if (regval < 0 || !spd5118_vendor_valid(regval & 0xff, regval >> 8))
> +		return -ENODEV;
> +
> +	regval = i2c_smbus_read_byte_data(client, SPD5118_REG_CAPABILITY);
> +	if (regval < 0)
> +		return -ENODEV;
> +	if (!(regval & SPD5118_CAP_TS_SUPPORT) || (regval & 0xfc))
> +		return -ENODEV;
> +
> +	regval = i2c_smbus_read_byte_data(client, SPD5118_REG_TEMP_CLR);
> +	if (regval)
> +		return -ENODEV;
> +	regval = i2c_smbus_read_byte_data(client, SPD5118_REG_ERROR_CLR);
> +	if (regval)
> +		return -ENODEV;
> +
> +	regval = i2c_smbus_read_byte_data(client, SPD5118_REG_REVISION);
> +	if (regval < 0 || (regval & 0xc1))
> +		return -ENODEV;
> +
> +	regval = i2c_smbus_read_byte_data(client, SPD5118_REG_TEMP_CONFIG);
> +	if (regval < 0)
> +		return -ENODEV;
> +	if (regval & ~SPD5118_TS_DISABLE)
> +		return -ENODEV;
> +
> +	strscpy(info->type, "spd5118", I2C_NAME_SIZE);
> +	return 0;
> +}
> +
> +static const struct hwmon_channel_info *spd5118_info[] = {
> +	HWMON_CHANNEL_INFO(chip,
> +			   HWMON_C_REGISTER_TZ),
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT |
> +			   HWMON_T_LCRIT | HWMON_T_LCRIT_ALARM |
> +			   HWMON_T_MIN | HWMON_T_MIN_ALARM |
> +			   HWMON_T_MAX | HWMON_T_MAX_ALARM |
> +			   HWMON_T_CRIT | HWMON_T_CRIT_ALARM |
> +			   HWMON_T_ENABLE),
> +	NULL
> +};
> +
> +static const struct hwmon_ops spd5118_hwmon_ops = {
> +	.is_visible = spd5118_is_visible,
> +	.read = spd5118_read,
> +	.write = spd5118_write,
> +};
> +
> +static const struct hwmon_chip_info spd5118_chip_info = {
> +	.ops = &spd5118_hwmon_ops,
> +	.info = spd5118_info,
> +};
> +
> +static bool spd5118_writeable_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case SPD5118_REG_TEMP_CLR:
> +	case SPD5118_REG_TEMP_CONFIG:
> +	case SPD5118_REG_TEMP_MAX:
> +	case SPD5118_REG_TEMP_MAX + 1:
> +	case SPD5118_REG_TEMP_MIN:
> +	case SPD5118_REG_TEMP_MIN + 1:
> +	case SPD5118_REG_TEMP_CRIT:
> +	case SPD5118_REG_TEMP_CRIT + 1:
> +	case SPD5118_REG_TEMP_LCRIT:
> +	case SPD5118_REG_TEMP_LCRIT + 1:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static bool spd5118_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case SPD5118_REG_TEMP_CLR:
> +	case SPD5118_REG_ERROR_CLR:
> +	case SPD5118_REG_TEMP:
> +	case SPD5118_REG_TEMP + 1:
> +	case SPD5118_REG_TEMP_STATUS:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static const struct regmap_config spd5118_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = SPD5118_REG_TEMP_STATUS,
> +	.writeable_reg = spd5118_writeable_reg,
> +	.volatile_reg = spd5118_volatile_reg,
> +	.cache_type = REGCACHE_MAPLE,
> +};
> +
> +static int spd5118_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	unsigned int regval, revision, vendor, bank;
> +	struct device *hwmon_dev;
> +	struct regmap *regmap;
> +	int err;
> +
> +	regmap = devm_regmap_init_i2c(client, &spd5118_regmap_config);
> +	if (IS_ERR(regmap))
> +		return dev_err_probe(dev, PTR_ERR(regmap), "regmap init failed\n");
> +
> +	err = regmap_read(regmap, SPD5118_REG_CAPABILITY, &regval);
> +	if (err)
> +		return err;
> +	if (!(regval & SPD5118_CAP_TS_SUPPORT))
> +		return -ENODEV;
> +
> +	err = regmap_read(regmap, SPD5118_REG_REVISION, &revision);
> +	if (err)
> +		return err;
> +
> +	err = regmap_read(regmap, SPD5118_REG_VENDOR, &bank);
> +	if (err)
> +		return err;
> +	err = regmap_read(regmap, SPD5118_REG_VENDOR + 1, &vendor);
> +	if (err)
> +		return err;
> +	if (!spd5118_vendor_valid(bank, vendor))
> +		return -ENODEV;
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev, "spd5118",
> +							 regmap, &spd5118_chip_info,
> +							 NULL);
> +	if (IS_ERR(hwmon_dev))
> +		return PTR_ERR(hwmon_dev);
> +
> +	/*
> +	 * From JESD300-5B
> +	 *   MR2 bits [5:4]: Major revision, 1..4
> +	 *   MR2 bits [3:1]: Minor revision, 0..8? Probably a typo, assume 1..8
> +	 */
> +	dev_info(dev, "DDR5 temperature sensor: vendor 0x%02x:0x%02x revision %d.%d\n",
> +		 bank & 0x7f, vendor, ((revision >> 4) & 0x03) + 1, ((revision >> 1) & 0x07) + 1);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id spd5118_id[] = {
> +	{ "spd5118", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, spd5118_id);
> +
> +static const struct of_device_id spd5118_of_ids[] = {
> +	{ .compatible = "jedec,spd5118", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, spd5118_of_ids);
> +
> +static struct i2c_driver spd5118_driver = {
> +	.class		= I2C_CLASS_HWMON,
> +	.driver = {
> +		.name	= "spd5118",
> +		.of_match_table = spd5118_of_ids,
> +	},
> +	.probe		= spd5118_probe,
> +	.id_table	= spd5118_id,
> +	.detect		= spd5118_detect,
> +	.address_list	= normal_i2c,
> +};
> +
> +module_i2c_driver(spd5118_driver);
> +
> +MODULE_AUTHOR("René Rebe <rene@...ctcode.de>");
> +MODULE_AUTHOR("Guenter Roeck <linux@...ck-us.net>");
> +MODULE_DESCRIPTION("SPD 5118 driver");
> +MODULE_LICENSE("GPL");

Powered by blists - more mailing lists