linux-kernel - Re: [PATCH v2 0/3] MCTP over PCC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <68439d55-af34-ab8a-dec4-0c2d95ed4294@arm.com>
Date: Fri, 7 Jun 2024 15:06:03 +0800
From: John Chung <john.chung@....com>
To: admiyo@...amperecomputing.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org, nd@....com,
 john.chung@....com
Subject: Re: [PATCH v2 0/3] MCTP over PCC



On 5/29/2024 3:18 AM, admiyo@...amperecomputing.com wrote:
> From: Adam Young <admiyo@...amperecomputing.com>
> 
> This series adds support for the Management Control Transport Protocol (MCTP)
> over the Platform Communication Channel (PCC) mechanism.
> 
> MCTP defines a communication model intended to
> facilitate communication between Management controllers
> and other management controllers, and between Management
> controllers and management devices
> 
> PCC is a mechanism for communication between components within
> the  Platform.  It is a composed of shared memory regions,
> interrupt registers, and status registers.
> 
> The MCTP over PCC driver makes use of two PCC channels. For
> sending messages, it uses a Type 3 channel, and for receiving
> messages it uses the paired Type 4 channel.  The device
> and corresponding channels are specified via ACPI.
> 
> Changes in V2
> 
> - All Variable Declarations are in reverse Xmass Tree Format
> - All Checkpatch Warnings Are Fixed
> - Removed Dead code
> - Added packet tx/rx stats
> - Removed network physical address.  This is still in
>    disucssion in the spec, and will be added once there
>    is consensus. The protocol can be used with out it.
>    This also lead to the removal of the Big Endian
>    conversions.
> - Avoided using non volatile pointers in copy to and from io space
> - Reorderd the patches to put the ACK check for the PCC Mailbox
>    as a pre-requisite.  The corresponding change for the MCTP
>    driver has been inlined in the main patch.
> - Replaced magic numbers with constants, fixed typos, and other
>    minor changes from code review.
> 
> Code Review Change not made
> 
> - Did not change the module init unload function to use the
>    ACPI equivalent as they do not remove all devices prior
>    to unload, leading to dangling references and seg faults.
> 
> Adam Young (3):
>    mctp pcc: Check before sending MCTP PCC response ACK
>    mctp pcc: Allow PCC Data Type in MCTP resource.
>    mctp pcc: Implement MCTP over PCC Transport
> 
>   drivers/acpi/acpica/rsaddr.c |   2 +-
>   drivers/mailbox/pcc.c        |   5 +-
>   drivers/net/mctp/Kconfig     |  13 ++
>   drivers/net/mctp/Makefile    |   1 +
>   drivers/net/mctp/mctp-pcc.c  | 361 +++++++++++++++++++++++++++++++++++
>   include/acpi/pcc.h           |   1 +
>   6 files changed, 381 insertions(+), 2 deletions(-)
>   create mode 100644 drivers/net/mctp/mctp-pcc.c
> 

Tested OK on Arm FVP.

Tested-by: John Chung <john.chung@....com>