[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240607-tlv320adc3xxx-micbias-gpo-v2-1-b140a45ffffe@axis.com>
Date: Fri, 7 Jun 2024 12:00:45 +0200
From: Ricard Wanderlof <ricard.wanderlof@...s.com>
To: Mark Brown <broonie@...nel.org>, Liam Girdwood <lgirdwood@...il.com>,
Shenghao Ding <shenghao-ding@...com>, Kevin Lu <kevin-lu@...com>, Baojun Xu
<baojun.xu@...com>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Ricard Wanderlof
<ricardw@...s.com>, Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai
<tiwai@...e.com>
CC: <alsa-devel@...a-project.org>, <linux-sound@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>, "Ricard
Wanderlof" <ricard.wanderlof@...s.com>, <kernel@...s.com>
Subject: [PATCH v2 1/2] ASoC: dt-bindings: tlv320adc3xxx: Add
MICBIAS-as-GPO properties
Add properties for configuring the MICBIAS pins as general purpose
outputs, with some limitations: The voltage on the pin when activated
may be set using another property to 2.0 V, 2.5 V or AVDD.
When deactivated the pin will float.
Signed-off-by: Ricard Wanderlof <ricard.wanderlof@...s.com>
---
.../bindings/sound/ti,tlv320adc3xxx.yaml | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
index ede14ca2c07a..b7cae1c65e84 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
@@ -82,6 +82,26 @@ properties:
Note that there is currently no support for reading the GPIO pins as
inputs.
+ ti,micbias1-gpo:
+ type: boolean
+ description: |
+ When set, the MICBIAS1 pin may be controlled via the GPIO framework,
+ as pin number 3 on the device.
+
+ In this mode, when the pin is activated, it will be set to the voltage
+ specified by the ti,micbias1-vg property. When deactivated, the pin will
+ float.
+
+ ti,micbias2-gpo:
+ type: boolean
+ description: |
+ When set, the MICBIAS2 pin may be controlled via the GPIO framework,
+ as pin number 4 on the device.
+
+ In this mode, when the pin is activated, it will be set to the voltage
+ specified by the ti,micbias2-vg property. When deactivated, the pin will
+ float.
+
ti,micbias1-vg:
$ref: /schemas/types.yaml#/definitions/uint32
enum:
@@ -104,6 +124,10 @@ properties:
description: |
Mic bias voltage output on MICBIAS2 pin
+dependencies:
+ ti,micbias1-gpio: [ti,micbias1-vg]
+ ti,micbias2-gpio: [ti,micbias2-vg]
+
required:
- compatible
- reg
--
2.30.2
Powered by blists - more mailing lists