Message-Id: <20240607-rtc-sd2405al-v1-1-535971e7a866@gmail.com>
Date: Fri, 07 Jun 2024 14:20:41 +0200
From: Tóth János via B4 Relay <devnull+gomba007.gmail.com@...nel.org>
To: Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc: linux-kernel@...r.kernel.org, linux-rtc@...r.kernel.org, 
 Tóth János <gomba007@...il.com>
Subject: [PATCH] drivers: rtc: Add driver for SD2405AL.

From: Tóth János <gomba007@...il.com>

Add support for the DFRobot SD2405AL I2C RTC Module.

Datasheet:
	https://image.dfrobot.com/image/data/TOY0021/SD2405AL%20datasheet%20(Angelo%20v0.1).pdf

Product:
	https://www.dfrobot.com/product-1600.html

To instantiate (assuming device is connected to I2C-1)
as root:
	echo sd2405al 0x32 > /sys/bus/i2c/devices/i2c-1/new_device
as user:
	echo 'sd2405al 0x32' | sudo tee /sys/class/i2c-adapter/i2c-1/new_device

The driver is tested with:
	+ hwclock
	+ tools/testing/selftests/rtc/setdate
	+ tools/testing/selftests/rtc/rtctest

Signed-off-by: Tóth János <gomba007@...il.com>
---
 MAINTAINERS                |   6 ++
 drivers/rtc/Kconfig        |  10 +++
 drivers/rtc/Makefile       |   1 +
 drivers/rtc/rtc-sd2405al.c | 195 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 212 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8754ac2c259d..c78587811433 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6337,6 +6337,12 @@ F:	include/net/devlink.h
 F:	include/uapi/linux/devlink.h
 F:	net/devlink/
 
+DFROBOT SD2405AL RTC DRIVER
+M:	Tóth János <gomba007@...il.com>
+L:	linux-rtc@...r.kernel.org
+S:	Maintained
+F:	drivers/rtc/rtc-sd2405al.c
+
 DH ELECTRONICS IMX6 DHCOM/DHCOR BOARD SUPPORT
 M:	Christoph Niedermaier <cniedermaier@...electronics.com>
 L:	kernel@...electronics.com
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 2a95b05982ad..15f1c0ba5759 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -743,6 +743,16 @@ config RTC_DRV_S5M
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-s5m.
 
+config RTC_DRV_SD2405AL
+	tristate "DFRobot SD2405AL"
+	select REGMAP_I2C
+	help
+	  If you say yes here you will get support for the
+	  DFRobot SD2405AL I2C RTC Module.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-sd2405al.
+
 config RTC_DRV_SD3078
 	tristate "ZXW Shenzhen whwave SD3078"
 	select REGMAP_I2C
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 3004e372f25f..3d19feba1e1c 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -162,6 +162,7 @@ obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
 obj-$(CONFIG_RTC_DRV_S5M)	+= rtc-s5m.o
 obj-$(CONFIG_RTC_DRV_SA1100)	+= rtc-sa1100.o
 obj-$(CONFIG_RTC_DRV_SC27XX)	+= rtc-sc27xx.o
+obj-$(CONFIG_RTC_DRV_SD2405AL)	+= rtc-sd2405al.o
 obj-$(CONFIG_RTC_DRV_SD3078)   += rtc-sd3078.o
 obj-$(CONFIG_RTC_DRV_SH)	+= rtc-sh.o
 obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
diff --git a/drivers/rtc/rtc-sd2405al.c b/drivers/rtc/rtc-sd2405al.c
new file mode 100644
index 000000000000..3250c4616aa3
--- /dev/null
+++ b/drivers/rtc/rtc-sd2405al.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RTC driver for the SD2405AL Real-Time Clock
+ *
+ * Datasheet:
+ * https://image.dfrobot.com/image/data/TOY0021/SD2405AL%20datasheet%20(Angelo%20v0.1).pdf
+ *
+ * Copyright (C) 2024 Tóth János <gomba007@...il.com>
+ * Copyright (C) 2018 Zoro Li <long17.cool@....com>
+ */
+
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define SD2405AL_REG_T_SEC	0x00
+#define SD2405AL_REG_T_MIN	0x01
+#define SD2405AL_REG_T_HOUR	0x02
+#define SD2405AL_REG_T_WEEK	0x03
+#define SD2405AL_REG_T_DAY	0x04
+#define SD2405AL_REG_T_MON	0x05
+#define SD2405AL_REG_T_YEAR	0x06
+
+#define SD2405AL_REG_A_SEC	0x07
+#define SD2405AL_REG_A_MIN	0x08
+#define SD2405AL_REG_A_HOUR	0x09
+#define SD2405AL_REG_A_WEEK	0x0A
+#define SD2405AL_REG_A_DAY	0x0B
+#define SD2405AL_REG_A_MON	0x0C
+#define SD2405AL_REG_A_YEAR	0x0D
+#define SD2405AL_REG_A_EN	0x0E
+
+#define SD2405AL_REG_CTR1	0x0F
+#define SD2405AL_REG_CTR2	0x10
+#define SD2405AL_REG_CTR3	0x11
+#define SD2405AL_REG_TTF	0x12
+#define SD2405AL_REG_CTR	0x13	/* count down register */
+
+#define SD2405AL_REG_M_START	0x14	/* general RAM start */
+#define SD2405AL_REG_M_END	0x1F	/* general RAM end */
+
+#define SD2405AL_NUM_T_REGS	(SD2405AL_REG_T_YEAR - SD2405AL_REG_T_SEC + 1)
+
+#define SD2405AL_BIT_24H	0x80
+#define SD2405AL_BIT_12H_PM	0x20
+
+struct sd2405al {
+	struct rtc_device	*rtc;
+	struct regmap		*regmap;
+};
+
+static int sd2405al_read_time(struct device *dev, struct rtc_time *time)
+{
+	u8 hour;
+	u8 data[SD2405AL_NUM_T_REGS] = { 0 };
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sd2405al *sd2405al = i2c_get_clientdata(client);
+	int ret;
+
+	ret = regmap_bulk_read(sd2405al->regmap, SD2405AL_REG_T_SEC, data,
+			       SD2405AL_NUM_T_REGS);
+	if (ret < 0) {
+		printk(KBUILD_MODNAME ": reading failed: %d\n", ret);
+		return ret;
+	}
+
+	time->tm_sec = bcd2bin(data[SD2405AL_REG_T_SEC] & 0x7F);
+	time->tm_min = bcd2bin(data[SD2405AL_REG_T_MIN] & 0x7F);
+
+	hour = data[SD2405AL_REG_T_HOUR];
+	if (hour & SD2405AL_BIT_24H)
+		time->tm_hour = bcd2bin(hour & 0x3F);
+	else
+		if (hour & SD2405AL_BIT_12H_PM)
+			time->tm_hour = bcd2bin(hour & 0x1F) + 12;
+		else /* 12 hour mode, AM */
+			time->tm_hour = bcd2bin(hour & 0x1F);
+
+	time->tm_mday = bcd2bin(data[SD2405AL_REG_T_DAY] & 0x3F);
+	time->tm_wday = data[SD2405AL_REG_T_WEEK] & 0x07;
+	time->tm_mon = bcd2bin(data[SD2405AL_REG_T_MON] & 0x1F) - 1;
+	time->tm_year = bcd2bin(data[SD2405AL_REG_T_YEAR]) + 100;
+
+	return 0;
+}
+
+static int sd2405al_set_time(struct device *dev, struct rtc_time *time)
+{
+	u8 data[SD2405AL_NUM_T_REGS];
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sd2405al *sd2405al = i2c_get_clientdata(client);
+	int ret;
+
+	data[SD2405AL_REG_T_SEC] = bin2bcd(time->tm_sec);
+	data[SD2405AL_REG_T_MIN] = bin2bcd(time->tm_min);
+	data[SD2405AL_REG_T_HOUR] = bin2bcd(time->tm_hour) | SD2405AL_BIT_24H;
+	data[SD2405AL_REG_T_DAY] = bin2bcd(time->tm_mday);
+	data[SD2405AL_REG_T_WEEK] = time->tm_wday & 0x07;
+	data[SD2405AL_REG_T_MON] = bin2bcd(time->tm_mon) + 1;
+	data[SD2405AL_REG_T_YEAR] = bin2bcd(time->tm_year - 100);
+
+	ret = regmap_bulk_write(sd2405al->regmap, SD2405AL_REG_T_SEC, data,
+				SD2405AL_NUM_T_REGS);
+	if (ret < 0) {
+		printk(KBUILD_MODNAME ": writing failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct rtc_class_ops sd2405al_rtc_ops = {
+	.read_time = sd2405al_read_time,
+	.set_time = sd2405al_set_time,
+};
+
+static const struct regmap_config sd2405al_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = SD2405AL_REG_M_END,
+};
+
+static int sd2405al_probe(struct i2c_client *client)
+{
+	struct sd2405al *sd2405al;
+	int func;
+	int ret;
+
+	func = i2c_check_functionality(client->adapter, I2C_FUNC_I2C);
+	if (!func) {
+		printk(KBUILD_MODNAME ": invalid adapter\n");
+		return -ENODEV;
+	}
+
+	sd2405al = devm_kzalloc(&client->dev, sizeof(*sd2405al), GFP_KERNEL);
+	if (!sd2405al) {
+		printk(KBUILD_MODNAME ": unable to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	sd2405al->regmap = devm_regmap_init_i2c(client, &sd2405al_regmap_conf);
+	if (IS_ERR(sd2405al->regmap)) {
+		printk(KBUILD_MODNAME ": unable to allocate regmap\n");
+		return PTR_ERR(sd2405al->regmap);
+	}
+
+	i2c_set_clientdata(client, sd2405al);
+
+	sd2405al->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(sd2405al->rtc)) {
+		printk(KBUILD_MODNAME ": unable to allocate device\n");
+		return PTR_ERR(sd2405al->rtc);
+	}
+
+	sd2405al->rtc->ops = &sd2405al_rtc_ops;
+	sd2405al->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	sd2405al->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	ret = devm_rtc_register_device(sd2405al->rtc);
+	if (ret < 0) {
+		printk(KBUILD_MODNAME ": unable to register device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id sd2405al_id[] = {
+	{ "sd2405al", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, sd2405al_id);
+
+static const __maybe_unused struct of_device_id sd2405al_of_match[] = {
+	{ .compatible = "dfrobot,sd2405al" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sd2405al_of_match);
+
+static struct i2c_driver sd2405al_driver = {
+	.driver = {
+		.name = "sd2405al",
+		.of_match_table = of_match_ptr(sd2405al_of_match),
+	},
+	.probe = sd2405al_probe,
+	.id_table = sd2405al_id,
+};
+
+module_i2c_driver(sd2405al_driver);
+
+MODULE_AUTHOR("Tóth János");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SD2405AL RTC driver");

---
base-commit: c3f38fa61af77b49866b006939479069cd451173
change-id: 20240607-rtc-sd2405al-a0947377c73d

Best regards,
-- 
Tóth János <gomba007@...il.com>

Powered by blists - more mailing lists