linux-kernel - Re: [PATCH v5 11/12] ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5b1a7185-2273-40e9-8451-ba9add689637@denx.de>
Date: Fri, 7 Jun 2024 14:49:22 +0200
From: Marek Vasut <marex@...x.de>
To: Christophe Roullier <christophe.roullier@...s.st.com>,
 "David S . Miller" <davem@...emloft.net>, Eric Dumazet
 <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>,
 Maxime Coquelin <mcoquelin.stm32@...il.com>,
 Alexandre Torgue <alexandre.torgue@...s.st.com>,
 Richard Cochran <richardcochran@...il.com>, Jose Abreu
 <joabreu@...opsys.com>, Liam Girdwood <lgirdwood@...il.com>,
 Mark Brown <broonie@...nel.org>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
 linux-stm32@...md-mailman.stormreply.com,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 11/12] ARM: dts: stm32: add ethernet1 for
 STM32MP135F-DK board

On 6/7/24 11:57 AM, Christophe Roullier wrote:
> Ethernet1: RMII with crystal
> Ethernet2: RMII with no cristal, need "phy-supply" property to work,
> today this property was managed by Ethernet glue, but should be present
> and managed in PHY node. So I will push second Ethernet in next step.
> 
> PHYs used are SMSC (LAN8742A)
> 
> Signed-off-by: Christophe Roullier <christophe.roullier@...s.st.com>
> ---
>   arch/arm/boot/dts/st/stm32mp135f-dk.dts | 23 +++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> index 567e53ad285fa..16e91b9d812d8 100644
> --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> @@ -19,6 +19,7 @@ / {
>   	compatible = "st,stm32mp135f-dk", "st,stm32mp135";
>   
>   	aliases {
> +		ethernet0 = &ethernet1;
>   		serial0 = &uart4;
>   		serial1 = &usart1;
>   		serial2 = &uart8;
> @@ -141,6 +142,28 @@ &cryp {
>   	status = "okay";
>   };
>   
> +&ethernet1 {
> +	status = "okay";
> +	pinctrl-0 = <&eth1_rmii_pins_a>;
> +	pinctrl-1 = <&eth1_rmii_sleep_pins_a>;
> +	pinctrl-names = "default", "sleep";
> +	phy-mode = "rmii";
> +	phy-handle = <&phy0_eth1>;
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +
> +		phy0_eth1: ethernet-phy@0 {
> +			compatible = "ethernet-phy-id0007.c131";
> +			reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>;
> +			reg = <0>;

Keep the list sorted.