linux-kernel - Re: [PATCH 1/1] virtio-can: Add link to CAN specification from ISO.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Fri, 7 Jun 2024 12:43:51 +0900
From: Vincent Mailhol <vincent.mailhol@...il.com>
To: Harald Mommer <Harald.Mommer@...nsynergy.com>
Cc: virtio-dev@...ts.linux.dev, linux-can@...r.kernel.org, 
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org, 
	Wolfgang Grandegger <wg@...ndegger.com>, Marc Kleine-Budde <mkl@...gutronix.de>, 
	"David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Dariusz Stojaczyk <Dariusz.Stojaczyk@...nsynergy.com>
Subject: Re: [PATCH 1/1] virtio-can: Add link to CAN specification from ISO.

On Thu. 6 Jun. 2024 at 23:26, Harald Mommer
<Harald.Mommer@...nsynergy.com> wrote:
> Add link to the CAN specification in the ISO shop.
>
>   ISO 11898-1:2015
>   Road vehicles
>   Controller area network (CAN)
>   Part 1: Data link layer and physical signalling
>
> The specification is not freely obtainable there.
> ---
>  introduction.tex | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/introduction.tex b/introduction.tex
> index 8bcef03..72573d6 100644
> --- a/introduction.tex
> +++ b/introduction.tex

Excuse my ignorance, this is not a patch toward the Linux tree, right?
Could you let me know which git tree this patch is targetting?

> @@ -142,7 +142,8 @@ \section{Normative References}\label{sec:Normative References}
>      TRANSMISSION CONTROL PROTOCOL
>         \newline\url{https://www.rfc-editor.org/rfc/rfc793}\\
>         \phantomsection\label{intro:CAN}\textbf{[CAN]} &
> -    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling\\
> +    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling
> +       \newline\url{https://www.iso.org/standard/63648.html}\\
>  \end{longtable}

I just realised that ISO 11898-1:2024 was published last month:
https://www.iso.org/standard/86384.html.

Just for confirmation, are you keeping the reference to ISO
11898-1:2015 until CAN XL support gets added? If yes, OK as-is.

On my side, I now need to read the new ISO 11898-1:2024.

>
>  \section{Non-Normative References}
> --
> 2.34.1
>
>