[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240608114529.23060-1-johan+linaro@kernel.org>
Date: Sat, 8 Jun 2024 13:45:29 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Konrad Dybcio <konrad.dybcio@...aro.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
regressions@...ts.linux.dev,
linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH] soc: qcom: pmic_glink: disable UCSI on sc8280xp
Disconnecting an external display triggers a hypervisor reset on the
Lenovo ThinkPad X13s since 6.10-rc1 which enabled UCSI. Disable it again
until the regression has been fixed properly.
Fixes: 3f91a0bf4a0b ("soc: qcom: pmic_glink: reenable UCSI on sc8280xp")
Cc: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
drivers/soc/qcom/pmic_glink.c | 4 ++++
1 file changed, 4 insertions(+)
Dmitry reported off-list that his X13s was crashing when he disconnected
an external display and I tracked it down to the enablement of UCSI in
6.10-rc1.
I have not had time to debug this further, but I'm flagging this as a
regression and sending an effective so that we have a fall back in case
this is not fixed in timely manner.
Note that this likely affects other Qualcomm SoCs as well.
Johan
#regzbot introduced: 3f91a0bf4a0b
diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
index 40fb09d69014..65279243072c 100644
--- a/drivers/soc/qcom/pmic_glink.c
+++ b/drivers/soc/qcom/pmic_glink.c
@@ -348,11 +348,15 @@ static void pmic_glink_remove(struct platform_device *pdev)
mutex_unlock(&__pmic_glink_lock);
}
+static const unsigned long pmic_glink_sc8280xp_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
+ BIT(PMIC_GLINK_CLIENT_ALTMODE);
+
static const unsigned long pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
BIT(PMIC_GLINK_CLIENT_ALTMODE) |
BIT(PMIC_GLINK_CLIENT_UCSI);
static const struct of_device_id pmic_glink_of_match[] = {
+ { .compatible = "qcom,sc8280xp-pmic-glink", .data = &pmic_glink_sc8280xp_client_mask },
{ .compatible = "qcom,pmic-glink", .data = &pmic_glink_sm8450_client_mask },
{}
};
--
2.44.1
Powered by blists - more mailing lists