[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240608155526.12996-2-johan+linaro@kernel.org>
Date: Sat, 8 Jun 2024 17:55:15 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Lee Jones <lee@...nel.org>,
Mark Brown <broonie@...nel.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>,
Linus Walleij <linus.walleij@...aro.org>,
Stephen Boyd <swboyd@...omium.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v3 01/12] dt-bindings: mfd: pm8008: Add reset gpio
Describe the optional reset gpio (which may not be wired up).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index 0c75d8bde568..e1e05921afb4 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -29,6 +29,9 @@ properties:
description: Parent interrupt.
+ reset-gpios:
+ maxItems: 1
+
"#interrupt-cells":
const: 2
@@ -97,6 +100,7 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/qcom-pm8008.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -115,6 +119,8 @@ examples:
interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+
pm8008_gpios: gpio@...0 {
compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
--
2.44.1
Powered by blists - more mailing lists