| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240608155526.12996-10-johan+linaro@kernel.org>
Date: Sat, 8 Jun 2024 17:55:23 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Lee Jones <lee@...nel.org>,
Mark Brown <broonie@...nel.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>,
Linus Walleij <linus.walleij@...aro.org>,
Stephen Boyd <swboyd@...omium.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v3 09/12] dt-bindings: mfd: pm8008: Rework binding
Rework the pm8008 binding, which is currently unused, by dropping
internal details like register offsets and interrupts and by adding the
missing regulator and temperature alarm properties.
Note that child nodes are still used for pinctrl and regulator
configuration.
Also note that the pinctrl state definition will be extended later and
could eventually also be shared with other PMICs (e.g. by breaking out
bits of qcom,pmic-gpio.yaml).
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
.../devicetree/bindings/mfd/qcom,pm8008.yaml | 135 +++++++++++-------
1 file changed, 80 insertions(+), 55 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index d71657f488db..0c6e1870db1d 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -27,103 +27,128 @@ properties:
reset-gpios:
maxItems: 1
- "#interrupt-cells":
+ vdd-l1-l2-supply: true
+ vdd-l3-l4-supply: true
+ vdd-l5-supply: true
+ vdd-l6-supply: true
+ vdd-l7-supply: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
const: 2
- description: |
- The first cell is the IRQ number, the second cell is the IRQ trigger
- flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+ gpio-ranges:
+ maxItems: 1
interrupt-controller: true
- "#address-cells":
- const: 1
+ "#interrupt-cells":
+ const: 2
- "#size-cells":
+ "#thermal-sensor-cells":
const: 0
-patternProperties:
- "^gpio@[0-9a-f]+$":
+ pinctrl:
type: object
+ additionalProperties: false
+ patternProperties:
+ "-state$":
+ type: object
- description: |
- The GPIO peripheral. This node may be specified twice, one for each GPIO.
-
- properties:
- compatible:
- items:
- - const: qcom,pm8008-gpio
- - const: qcom,spmi-gpio
-
- reg:
- description: Peripheral address of one of the two GPIO peripherals.
- maxItems: 1
-
- gpio-controller: true
-
- gpio-ranges:
- maxItems: 1
+ allOf:
+ - $ref: /schemas/pinctrl/pinmux-node.yaml
+ - $ref: /schemas/pinctrl/pincfg-node.yaml
- interrupt-controller: true
+ properties:
+ pins:
+ items:
+ pattern: "^gpio[12]$"
- "#interrupt-cells":
- const: 2
+ function:
+ items:
+ - enum:
+ - normal
- "#gpio-cells":
- const: 2
+ required:
+ - pins
+ - function
- required:
- - compatible
- - reg
- - gpio-controller
- - interrupt-controller
- - "#gpio-cells"
- - gpio-ranges
- - "#interrupt-cells"
+ additionalProperties: false
+ regulators:
+ type: object
additionalProperties: false
+ patternProperties:
+ "^ldo[1-7]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- - "#address-cells"
- - "#size-cells"
+ - vdd-l1-l2-supply
+ - vdd-l3-l4-supply
+ - vdd-l5-supply
+ - vdd-l6-supply
+ - vdd-l7-supply
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+ - interrupt-controller
- "#interrupt-cells"
+ - "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/mfd/qcom-pm8008.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
- pmic@8 {
+ pm8008: pmic@8 {
compatible = "qcom,pm8008";
reg = <0x8>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
- pm8008_gpios: gpio@...0 {
- compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pm8008_gpios 0 0 2>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ vdd-l1-l2-supply = <&vreg_s8b_1p2>;
+ vdd-l3-l4-supply = <&vreg_s1b_1p8>;
+ vdd-l5-supply = <&vreg_bob>;
+ vdd-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_bob>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8008 0 0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #thermal-sensor-cells = <0>;
+
+ pinctrl {
+ gpio-keys-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+ };
+
+ regulators {
+ ldo1 {
+ regulator-name = "vreg_l1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ };
};
};
};
--
2.44.1
Powered by blists - more mailing lists