[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<TYZPR06MB6191C0769400FF03412E56F2E1C42@TYZPR06MB6191.apcprd06.prod.outlook.com>
Date: Sat, 8 Jun 2024 04:38:19 +0000
From: Tommy Huang <tommy_huang@...eedtech.com>
To: Andi Shyti <andi.shyti@...nel.org>
CC: "brendan.higgins@...ux.dev" <brendan.higgins@...ux.dev>,
"benh@...nel.crashing.org" <benh@...nel.crashing.org>, "joel@....id.au"
<joel@....id.au>, "andrew@...econstruct.com.au"
<andrew@...econstruct.com.au>, "wsa@...nel.org" <wsa@...nel.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"openbmc@...ts.ozlabs.org" <openbmc@...ts.ozlabs.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-aspeed@...ts.ozlabs.org"
<linux-aspeed@...ts.ozlabs.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, BMC-SW <BMC-SW@...eedtech.com>
Subject: RE: [PATCH] i2c: aspeed: Update the stop sw state when the bus
recovry occurs
Hi Andi,
> -----Original Message-----
> From: Andi Shyti <andi.shyti@...nel.org>
> Sent: Thursday, June 6, 2024 9:27 AM
> To: Tommy Huang <tommy_huang@...eedtech.com>
> Cc: brendan.higgins@...ux.dev; benh@...nel.crashing.org; joel@....id.au;
> andrew@...econstruct.com.au; wsa@...nel.org; linux-i2c@...r.kernel.org;
> openbmc@...ts.ozlabs.org; linux-arm-kernel@...ts.infradead.org;
> linux-aspeed@...ts.ozlabs.org; linux-kernel@...r.kernel.org; BMC-SW
> <BMC-SW@...eedtech.com>
> Subject: Re: [PATCH] i2c: aspeed: Update the stop sw state when the bus
> recovry occurs
>
> Hi Tommy,
>
> On Thu, May 30, 2024 at 03:06:56PM +0800, Tommy Huang wrote:
> > When the i2c bus recovey occurs, driver will send i2c stop command in
> > the scl low condition. In this case the sw state will still keep
> > original situation. Under multi-master usage, i2c bus recovery will be
> > called when i2c transfer timeout occurs. Update the stop command
> > calling with aspeed_i2c_do_stop function to update master_state.
> >
> > Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
> >
> > Signed-off-by: Tommy Huang <tommy_huang@...eedtech.com>
>
> Can you please add:
>
> Cc: <stable@...r.kernel.org> # v4.13+
Got it. I will add it.
>
> > ---
> > drivers/i2c/busses/i2c-aspeed.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-aspeed.c
> > b/drivers/i2c/busses/i2c-aspeed.c index ce8c4846b7fa..32f8b0c1c174
> > 100644
> > --- a/drivers/i2c/busses/i2c-aspeed.c
> > +++ b/drivers/i2c/busses/i2c-aspeed.c
> > @@ -169,6 +169,7 @@ struct aspeed_i2c_bus { };
> >
> > static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
> > +static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus);
>
> Can you please move aspeed_i2c_do_stop() on top? Doesn't make much sense
> to add the prototype here as there is no dependencies.
Sure. I will update it.
>
> It's different the case of aspeed_i2c_reset() because it needs aspeed_i2c_init().
>
> > static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus) { @@
> > -187,7 +188,7 @@ static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus
> *bus)
> > command);
> >
> > reinit_completion(&bus->cmd_complete);
> > - writel(ASPEED_I2CD_M_STOP_CMD, bus->base +
> ASPEED_I2C_CMD_REG);
> > + aspeed_i2c_do_stop(bus);
>
> The patch is good, though!
>
Thanks for your commects.
> Thanks,
> Andi
Powered by blists - more mailing lists