linux-kernel - [PATCH v3 13/15] iio: chemical: bme680: Remove redundant gas configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Mon, 10 Jun 2024 01:38:24 +0200
From: Vasileios Amoiridis <vassilisamir@...il.com>
To: jic23@...nel.org
Cc: dpfrey@...il.com,
	himanshujha199640@...il.com,
	lars@...afoo.de,
	linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	mike.looijmans@...ic.nl,
	vassilisamir@...il.com
Subject: [PATCH v3 13/15] iio: chemical: bme680: Remove redundant gas configuration

There is no need to explicitly configure the gas measurement registers
every time a gas measurement takes place. These are initial configurations
which are written in the beginning and they are not changed throughout
the lifetime of the driver.

If in the future, the device starts to support multiple configuration
profiles with variable heater duration and heater temperature, then they
could become members of the ->read_avail().

Signed-off-by: Vasileios Amoiridis <vassilisamir@...il.com>
---
 drivers/iio/chemical/bme680_core.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index b357871ef601..d08f32ecd139 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -683,13 +683,6 @@ static int bme680_read_gas(struct bme680_data *data,
 	u16 adc_gas_res, gas_regs_val;
 	u8 gas_range;
 
-	/* Set heater settings */
-	ret = bme680_gas_config(data);
-	if (ret < 0) {
-		dev_err(dev, "failed to set gas config\n");
-		return ret;
-	}
-
 	/* set forced mode to trigger measurement */
 	ret = bme680_set_mode(data, true);
 	if (ret < 0)
-- 
2.25.1