lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1718019553-111939-3-git-send-email-dh10.jung@samsung.com>
Date: Mon, 10 Jun 2024 20:39:12 +0900
From: Daehwan Jung <dh10.jung@...sung.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Thinh Nguyen
	<Thinh.Nguyen@...opsys.com>, Mathias Nyman <mathias.nyman@...el.com>
Cc: linux-usb@...r.kernel.org (open list:USB SUBSYSTEM),
	linux-kernel@...r.kernel.org (open list), h10.kim@...sung.com, Daehwan Jung
	<dh10.jung@...sung.com>
Subject: [PATCH v3 2/3] xhci: Add a quirk for writing ERST in high-low order

This quirk is for the controller that has a limitation in supporting
separate ERSTBA_HI and ERSTBA_LO programming. It's supported when
the ERSTBA is programmed ERSTBA_HI before ERSTBA_LO. That's because
the internal initialization of event ring fetches the
"Event Ring Segment Table Entry" based on the indication of ERSTBA_LO
written.

Signed-off-by: Daehwan Jung <dh10.jung@...sung.com>
---
RFC -> v1:
- add a quirk in xhci
- use the quirk for programming ERST high-low order
v1 -> v2:
- none
v2 -> v3:
- none
---
 drivers/usb/host/xhci-mem.c | 5 ++++-
 drivers/usb/host/xhci.h     | 2 ++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 3100219..ef768e6 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2325,7 +2325,10 @@ xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
 	erst_base = xhci_read_64(xhci, &ir->ir_set->erst_base);
 	erst_base &= ERST_BASE_RSVDP;
 	erst_base |= ir->erst.erst_dma_addr & ~ERST_BASE_RSVDP;
-	xhci_write_64(xhci, erst_base, &ir->ir_set->erst_base);
+	if (xhci->quirks & XHCI_WRITE_64_HI_LO)
+		hi_lo_writeq(erst_base, &ir->ir_set->erst_base);
+	else
+		xhci_write_64(xhci, erst_base, &ir->ir_set->erst_base);
 
 	/* Set the event ring dequeue address of this interrupter */
 	xhci_set_hc_event_deq(xhci, ir);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3041515..8664dd1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/usb/hcd.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
 
 /* Code sharing between pci-quirks and xhci hcd */
 #include	"xhci-ext-caps.h"
@@ -1627,6 +1628,7 @@ struct xhci_hcd {
 #define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
 #define XHCI_ZHAOXIN_TRB_FETCH	BIT_ULL(45)
 #define XHCI_ZHAOXIN_HOST	BIT_ULL(46)
+#define XHCI_WRITE_64_HI_LO	BIT_ULL(47)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
-- 
2.7.4


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ