lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240610140219.2795167-4-ms@dev.tdt.de>
Date: Mon, 10 Jun 2024 16:02:10 +0200
From: Martin Schiller <ms@....tdt.de>
To: martin.blumenstingl@...glemail.com,
	hauke@...ke-m.de,
	andrew@...n.ch,
	f.fainelli@...il.com,
	olteanv@...il.com,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org
Cc: netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	ms@....tdt.de
Subject: [PATCH net-next v3 03/12] net: dsa: lantiq_gswip: add terminating \n where missing

Some dev_err are missing the terminating \n. Let's add that.

Suggested-by: Vladimir Oltean <olteanv@...il.com>
Signed-off-by: Martin Schiller <ms@....tdt.de>
---
 drivers/net/dsa/lantiq_gswip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index b9c7076ce32f..fe64baf0d7f1 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -836,7 +836,7 @@ static int gswip_setup(struct dsa_switch *ds)
 
 	err = gswip_pce_load_microcode(priv);
 	if (err) {
-		dev_err(priv->dev, "writing PCE microcode failed, %i", err);
+		dev_err(priv->dev, "writing PCE microcode failed, %i\n", err);
 		return err;
 	}
 
@@ -1792,7 +1792,7 @@ static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
 	err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL,
 				     GSWIP_BM_RAM_CTRL_BAS);
 	if (err) {
-		dev_err(priv->dev, "timeout while reading table: %u, index: %u",
+		dev_err(priv->dev, "timeout while reading table: %u, index: %u\n",
 			table, index);
 		return 0;
 	}
@@ -2021,7 +2021,7 @@ static void gswip_gphy_fw_remove(struct gswip_priv *priv,
 
 	ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0);
 	if (ret)
-		dev_err(priv->dev, "can not reset GPHY FW pointer");
+		dev_err(priv->dev, "can not reset GPHY FW pointer\n");
 
 	clk_disable_unprepare(gphy_fw->clk_gate);
 
@@ -2050,7 +2050,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 			priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
 			break;
 		default:
-			dev_err(dev, "unknown GSWIP version: 0x%x", version);
+			dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
 			return -ENOENT;
 		}
 	}
@@ -2060,7 +2060,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 		priv->gphy_fw_name_cfg = match->data;
 
 	if (!priv->gphy_fw_name_cfg) {
-		dev_err(dev, "GPHY compatible type not supported");
+		dev_err(dev, "GPHY compatible type not supported\n");
 		return -ENOENT;
 	}
 
@@ -2163,7 +2163,7 @@ static int gswip_probe(struct platform_device *pdev)
 			return -EINVAL;
 		break;
 	default:
-		dev_err(dev, "unknown GSWIP version: 0x%x", version);
+		dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
 		return -ENOENT;
 	}
 
@@ -2191,7 +2191,7 @@ static int gswip_probe(struct platform_device *pdev)
 		goto gphy_fw_remove;
 	}
 	if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
-		dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+		dev_err(dev, "wrong CPU port defined, HW only supports port: %i\n",
 			priv->hw_info->cpu_port);
 		err = -EINVAL;
 		goto disable_switch;
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ