| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 11 Jun 2024 01:00:28 +0900
From: Ryusuke Konishi <konishi.ryusuke@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-nilfs@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-fsdevel@...r.kernel.org
Subject: [PATCH -mm 1/2] nilfs2: prepare backing device folios for writing after adding checksums
In preparation for inode_attach_wb(), which is currently called when
attaching the log writer, to be done via mark_buffer_dirty(), change
the order of preparation for log writing.
Specifically, the function call that adds checksums to segment summary
and super root blocks, which correspond to the log header and trailer,
is made before starting writeback of folios containing those blocks.
The current steps are as follows:
1. Put the folios of segment summary blocks in writeback state.
2. Put the folios of data blocks, metadata file blocks, and btree node
blocks (collectively called payload blocks) into writeback state.
3. Put the super root block folio in writeback state.
4. Add checksums.
Change these as follows:
1. Put the folios of payload blocks in writeback state.
2. Add checksums.
3. Put the folios of segment summary blocks in writeback state.
4. Put the super root block folio in writeback state.
In this order, the contents of segment summaries and super root block
that directly use buffer/folio of the backing device can be determined
including the addition of checksums, before preparing to write.
Step (1), which puts the payload block folios in writeback state, is
performed first because if there are memory-mapped data blocks, a valid
checksum can only be calculated after step (1).
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@...il.com>
---
fs/nilfs2/segment.c | 85 +++++++++++++++++++++++++++------------------
1 file changed, 52 insertions(+), 33 deletions(-)
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 6ea81f1d5094..a92609816bc9 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1639,41 +1639,30 @@ static void nilfs_begin_folio_io(struct folio *folio)
folio_unlock(folio);
}
-static void nilfs_segctor_prepare_write(struct nilfs_sc_info *sci)
+/**
+ * nilfs_prepare_write_logs - prepare to write logs
+ * @logs: logs to prepare for writing
+ * @seed: checksum seed value
+ *
+ * nilfs_prepare_write_logs() adds checksums and prepares the block
+ * buffers/folios for writing logs. In order to stabilize folios of
+ * memory-mapped file blocks by putting them in writeback state before
+ * calculating the checksums, first prepare to write payload blocks other
+ * than segment summary and super root blocks in which the checksums will
+ * be embedded.
+ */
+static void nilfs_prepare_write_logs(struct list_head *logs, u32 seed)
{
struct nilfs_segment_buffer *segbuf;
struct folio *bd_folio = NULL, *fs_folio = NULL;
+ struct buffer_head *bh;
- list_for_each_entry(segbuf, &sci->sc_segbufs, sb_list) {
- struct buffer_head *bh;
-
- list_for_each_entry(bh, &segbuf->sb_segsum_buffers,
- b_assoc_buffers) {
- if (bh->b_folio != bd_folio) {
- if (bd_folio) {
- folio_lock(bd_folio);
- folio_wait_writeback(bd_folio);
- folio_clear_dirty_for_io(bd_folio);
- folio_start_writeback(bd_folio);
- folio_unlock(bd_folio);
- }
- bd_folio = bh->b_folio;
- }
- }
-
+ /* Prepare to write payload blocks */
+ list_for_each_entry(segbuf, logs, sb_list) {
list_for_each_entry(bh, &segbuf->sb_payload_buffers,
b_assoc_buffers) {
- if (bh == segbuf->sb_super_root) {
- if (bh->b_folio != bd_folio) {
- folio_lock(bd_folio);
- folio_wait_writeback(bd_folio);
- folio_clear_dirty_for_io(bd_folio);
- folio_start_writeback(bd_folio);
- folio_unlock(bd_folio);
- bd_folio = bh->b_folio;
- }
+ if (bh == segbuf->sb_super_root)
break;
- }
set_buffer_async_write(bh);
if (bh->b_folio != fs_folio) {
nilfs_begin_folio_io(fs_folio);
@@ -1681,6 +1670,40 @@ static void nilfs_segctor_prepare_write(struct nilfs_sc_info *sci)
}
}
}
+ nilfs_begin_folio_io(fs_folio);
+
+ nilfs_add_checksums_on_logs(logs, seed);
+
+ /* Prepare to write segment summary blocks */
+ list_for_each_entry(segbuf, logs, sb_list) {
+ list_for_each_entry(bh, &segbuf->sb_segsum_buffers,
+ b_assoc_buffers) {
+ if (bh->b_folio == bd_folio)
+ continue;
+ if (bd_folio) {
+ folio_lock(bd_folio);
+ folio_wait_writeback(bd_folio);
+ folio_clear_dirty_for_io(bd_folio);
+ folio_start_writeback(bd_folio);
+ folio_unlock(bd_folio);
+ }
+ bd_folio = bh->b_folio;
+ }
+ }
+
+ /* Prepare to write super root block */
+ bh = NILFS_LAST_SEGBUF(logs)->sb_super_root;
+ if (bh) {
+ if (bh->b_folio != bd_folio) {
+ folio_lock(bd_folio);
+ folio_wait_writeback(bd_folio);
+ folio_clear_dirty_for_io(bd_folio);
+ folio_start_writeback(bd_folio);
+ folio_unlock(bd_folio);
+ bd_folio = bh->b_folio;
+ }
+ }
+
if (bd_folio) {
folio_lock(bd_folio);
folio_wait_writeback(bd_folio);
@@ -1688,7 +1711,6 @@ static void nilfs_segctor_prepare_write(struct nilfs_sc_info *sci)
folio_start_writeback(bd_folio);
folio_unlock(bd_folio);
}
- nilfs_begin_folio_io(fs_folio);
}
static int nilfs_segctor_write(struct nilfs_sc_info *sci,
@@ -2070,10 +2092,7 @@ static int nilfs_segctor_do_construct(struct nilfs_sc_info *sci, int mode)
nilfs_segctor_update_segusage(sci, nilfs->ns_sufile);
/* Write partial segments */
- nilfs_segctor_prepare_write(sci);
-
- nilfs_add_checksums_on_logs(&sci->sc_segbufs,
- nilfs->ns_crc_seed);
+ nilfs_prepare_write_logs(&sci->sc_segbufs, nilfs->ns_crc_seed);
err = nilfs_segctor_write(sci, nilfs);
if (unlikely(err))
--
2.34.1
Powered by blists - more mailing lists