[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240611-arm-psci-system_reset2-vendor-reboots-v4-0-98f55aa74ae8@quicinc.com>
Date: Tue, 11 Jun 2024 08:35:12 -0700
From: Elliot Berman <quic_eberman@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konrad.dybcio@...aro.org>,
Sebastian Reichel <sre@...nel.org>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Andy Yan
<andy.yan@...k-chips.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
"Mark
Rutland" <mark.rutland@....com>,
Bartosz Golaszewski
<bartosz.golaszewski@...aro.org>
CC: Satya Durga Srinivasu Prabhala <quic_satyap@...cinc.com>,
Melody Olvera
<quic_molvera@...cinc.com>,
Shivendra Pratap <quic_spratap@...cinc.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Florian Fainelli
<florian.fainelli@...adcom.com>,
<linux-pm@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
Elliot Berman <quic_eberman@...cinc.com>
Subject: [PATCH v4 0/4] Implement vendor resets for PSCI SYSTEM_RESET2
The PSCI SYSTEM_RESET2 call allows vendor firmware to define additional
reset types which could be mapped to the reboot argument.
Setting up reboot on Qualcomm devices can be inconsistent from chipset
to chipset. Generally, there is a PMIC register that gets written to
decide the reboot type. There is also sometimes a cookie that can be
written to indicate that the bootloader should behave differently than a
regular boot. These knobs evolve over product generations and require
more drivers. Qualcomm firmwares are beginning to expose vendor
SYSTEM_RESET2 types to simplify driver requirements from Linux.
Add support in PSCI to statically wire reboot mode commands from
userspace to a vendor reset and cookie value using the device tree. The
DT bindings are similar to reboot mode framework except that 2
integers are accepted (the type and cookie). Also, reboot mode framework
is intended to program the cookies, but not actually reboot the host.
PSCI SYSTEM_RESET2 does both. I've not added support for reading ACPI
tables since I don't have any device which provides them + firmware that
supports vendor SYSTEM_RESET2 types.
Previous discussions around SYSTEM_RESET2:
- https://lore.kernel.org/lkml/20230724223057.1208122-2-quic_eberman@quicinc.com/T/
- https://lore.kernel.org/all/4a679542-b48d-7e11-f33a-63535a5c68cb@quicinc.com/
Signed-off-by: Elliot Berman <quic_eberman@...cinc.com>
---
Changes in v4:
- Change mode- properties from uint32-matrix to uint32-array
- Restructure the reset-types node so only the restriction is in the
if/then schemas and not the entire definition
- Link to v3: https://lore.kernel.org/r/20240515-arm-psci-system_reset2-vendor-reboots-v3-0-16dd4f9c0ab4@quicinc.com
Changes in v3:
- Limit outer number of items to 1 for mode-* properties
- Move the reboot-mode for psci under a subnode "reset-types"
- Fix the DT node in qcm6490-idp so it doesn't overwrite the one from
sc7820.dtsi
- Link to v2: https://lore.kernel.org/r/20240414-arm-psci-system_reset2-vendor-reboots-v2-0-da9a055a648f@quicinc.com
Changes in v2:
- Fixes to schema as suggested by Rob and Krzysztof
- Add qcm6490 idp as first Qualcomm device to support
- Link to v1: https://lore.kernel.org/r/20231117-arm-psci-system_reset2-vendor-reboots-v1-0-03c4612153e2@quicinc.com
Changes in v1:
- Reference reboot-mode bindings as suggeted by Rob.
- Link to RFC: https://lore.kernel.org/r/20231030-arm-psci-system_reset2-vendor-reboots-v1-0-dcdd63352ad1@quicinc.com
---
Elliot Berman (4):
dt-bindings: power: reset: Convert mode-.* properties to array
dt-bindings: arm: Document reboot mode magic
firmware: psci: Read and use vendor reset types
arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for qcm6490-idp
Documentation/devicetree/bindings/arm/psci.yaml | 44 +++++++++++
.../bindings/power/reset/nvmem-reboot-mode.yaml | 5 ++
.../devicetree/bindings/power/reset/qcom,pon.yaml | 8 ++
.../bindings/power/reset/reboot-mode.yaml | 4 +-
.../bindings/power/reset/syscon-reboot-mode.yaml | 5 ++
arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 7 ++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
drivers/firmware/psci/psci.c | 92 ++++++++++++++++++++++
8 files changed, 164 insertions(+), 3 deletions(-)
---
base-commit: e92bee9f861b466c676f0200be3e46af7bc4ac6b
change-id: 20231016-arm-psci-system_reset2-vendor-reboots-cc3ad456c070
Best regards,
--
Elliot Berman <quic_eberman@...cinc.com>
Powered by blists - more mailing lists