linux-kernel - [PATCH v2 0/9] Configure GbEth for RGMII on RZ/G2L family

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240611113204.3004-1-paul.barker.ct@bp.renesas.com>
Date: Tue, 11 Jun 2024 12:31:54 +0100
From: Paul Barker <paul.barker.ct@...renesas.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
	Magnus Damm <magnus.damm@...il.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Linus Walleij <linus.walleij@...aro.org>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Cc: Paul Barker <paul.barker.ct@...renesas.com>,
	linux-renesas-soc@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-gpio@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2 0/9] Configure GbEth for RGMII on RZ/G2L family

For devices in the RZ/G2L family, we have so far relied on U-Boot
correctly configuring the Ethernet interfaces in RGMII mode with
PVDD=1.8V before the kernel is booted. Instead, the required
configuration should be described in the device tree and activated
within the pinctrl driver.

Changes v1-v2:
  * Rebased on next-20240611.
  * Changed the approach taken in the pinctrl patches to be compatible
    with changes made by Prabhakar for RZ/V2H support. I haven't picked
    up Reviewed-by tags on these patches as they've changed a lot.
  * Clarified that patch 6/9 also affects RZ/Five.
  * No major changes to the dts patches so I've picked up Geert's
    Reviewed-by tags for these.

Paul Barker (9):
  pinctrl: renesas: rzg2l: Clarify OEN read/write support
  pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write
    functions
  pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
  arm64: dts: renesas: rzg2l: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V
  arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
  arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V

 .../boot/dts/renesas/rzg2l-smarc-som.dtsi     |  86 ++++++----
 .../boot/dts/renesas/rzg2lc-smarc-som.dtsi    |  43 +++--
 .../boot/dts/renesas/rzg2ul-smarc-som.dtsi    |  86 ++++++----
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 150 ++++++++++++------
 4 files changed, 235 insertions(+), 130 deletions(-)

-- 
2.39.2