[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <d8b802dc-e65c-4b76-bfe0-a5b5c9dad472@ti.com>
Date: Wed, 12 Jun 2024 12:10:40 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <conor+dt@...nel.org>,
<krzk+dt@...nel.org>, <robh@...nel.org>, <kristo@...nel.org>,
<vigneshr@...com>, <nm@...com>
Subject: Re: [PATCH] arm64: dts: ti: k3-j722s-evm: Enable main_uart5
Hi all, please ignore this patch as main_uart5 needs to be kept
reserved. I will send another patch for the same
regards
On 28/05/24 4:38 pm, Bhavya Kapoor wrote:
>
> On 28/05/24 3:09 pm, Bhavya Kapoor wrote:
>> main_uart5 node defined in the SoC dtsi file is incomplete
>> and will not be functional unless it is extended with pinmux
>> information at board integration level.
>>
>> Thus, add pinmux for main_uart5 in the board dts file and
>> enable it to make it functional.
>>
>> Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
>> ---
> Test Logs:
> https://gist.github.com/a0498981/dc8b0cb670a5726eeb6c10f6de1f468e
>> arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>> b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>> index bf3c246d13d1..e3892a6f2fab 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>> @@ -18,6 +18,7 @@ / {
>> aliases {
>> serial0 = &wkup_uart0;
>> serial2 = &main_uart0;
>> + serial3 = &main_uart5;
>> mmc0 = &sdhci0;
>> mmc1 = &sdhci1;
>> };
>> @@ -142,6 +143,14 @@ J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22)
>> UART0_TXD */
>> bootph-all;
>> };
>> + main_uart5_pins_default: main-uart5-default-pins {
>> + pinctrl-single,pins = <
>> + J722S_IOPAD(0x0108, PIN_INPUT, 3) /* (J27) UART5_RXD */
>> + J722S_IOPAD(0x010c, PIN_OUTPUT, 3) /* (H27) UART5_TXD */
>> + >;
>> + bootph-all;
>> + };
>> +
>> vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
>> pinctrl-single,pins = <
>> J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27)
>> MMC2_CMD.GPIO0_70 */
>> @@ -240,6 +249,13 @@ &main_uart0 {
>> bootph-all;
>> };
>> +&main_uart5 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_uart5_pins_default>;
>> + status = "okay";
>> + bootph-all;
>> +};
>> +
>> &mcu_pmx0 {
>> wkup_uart0_pins_default: wkup-uart0-default-pins {
Powered by blists - more mailing lists