| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+6=WdSbQVWyLW7oLqZ1D-o=qYOK0pUN5w_7s2H8yYygtYtmxg@mail.gmail.com>
Date: Wed, 12 Jun 2024 19:35:21 +0800
From: zhaoxiong lv <lvzhaoxiong@...qin.corp-partner.google.com>
To: Alex Bee <knaerzche@...il.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, dmitry.torokhov@...il.com, robh@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, jikos@...nel.org,
benjamin.tissoires@...hat.co, dianders@...gle.com, hsinyi@...gle.com,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/4] drm/panel: kd101ne3: add new panel driver
On Fri, Jun 7, 2024 at 8:41 PM Alex Bee <knaerzche@...il.com> wrote:
>
>
> Am 07.06.24 um 14:01 schrieb Dmitry Baryshkov:
> > On Fri, Jun 07, 2024 at 07:44:33PM +0800, zhaoxiong lv wrote:
> >> hi Alex Bee
> >>
> >> I compared these two drivers. Although the control IC is the same, the
> >> panel is different, and the init_cmd and timing are also slightly
> >> different, so I added a separate driver.
> > But it obviously uses the same structure as the panel-jadard. Please
> > use existing driver instead of creating a completely new one (which you
> > happily overload with an unrelated panel).
> >
> +1
>
> panel-jadard already supports different panels with different
> init-sequences and they can be set per panel-type (compatible). If you need
> different reset-/enable timings (what I doubt) you'll have to extend struct
> jadard_panel_desc. In any case you'll have to put dsi->mode_flags in there
> as your panel uses MIPI_DSI_MODE_LPM what the currently supported don't
> need.
hi Alex Bee/Dmitry Baryshkov
We found that when using the panel-kingdisplay-kd101ne3 driver to send
init code, it takes about 3.5s to complete the sending, but using the
new API (mipi_dsi_dcs_write_seq_multi) will not have this phenomenon,
which seems to affect the user experience.
I would like to ask how I can deal with this?
thanks
>
> Alex.
>
> >> thanks
> >>
> >> On Sun, Jun 2, 2024 at 1:07 PM Alex Bee <knaerzche@...il.com> wrote:
> >>> Am 01.06.24 um 10:45 schrieb Zhaoxiong Lv:
> >>>
> >>> Hi Zhaoxiong,
> >>>
> >>>> The bias IC of this kindisplay-kd101ne3 panel is placed
> >>>> on the panel side, so when the panel is powered on,
> >>>> there is no need to control AVDD and AVEE in the driver,
> >>>> only 3.3v and reset are needed.
> >>>>
> >>>> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@...qin.corp-partner.google.com>
> >>>> ---
> >>>>
> >>>> Chage since V2:
> >>>>
> >>>> - 1. Use the new mipi_dsi_dcs_write_seq_multi() function.
> >>>> - 2. Modify Move mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode() to disable(),
> >>>> - and drop kingdisplay_panel_enter_sleep_mode().
> >>>> - 3. If prepare fails, disable GPIO before regulators.
> >>>> - 4. This function drm_connector_set_panel_orientation() is no longer used. Delete it.
> >>>> - 5. Drop ".shutdown = kingdisplay_panel_shutdown".
> >>>>
> >>>> ---
> >>>> drivers/gpu/drm/panel/Kconfig | 9 +
> >>>> drivers/gpu/drm/panel/Makefile | 1 +
> >>>> .../drm/panel/panel-kingdisplay-kd101ne3.c | 533 ++++++++++++++++++
> >>>> 3 files changed, 543 insertions(+)
> >>>> create mode 100644 drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> >>>>
> >>>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> >>>> index e54f6f5604ed..71669e990e8e 100644
> >>>> --- a/drivers/gpu/drm/panel/Kconfig
> >>>> +++ b/drivers/gpu/drm/panel/Kconfig
> >>>> @@ -297,6 +297,15 @@ config DRM_PANEL_KINGDISPLAY_KD097D04
> >>>> 24 bit RGB per pixel. It provides a MIPI DSI interface to
> >>>> the host and has a built-in LED backlight.
> >>>>
> >>>> +config DRM_PANEL_KINGDISPLAY_KD101NE3
> >>>> + tristate "Kingdisplay kd101ne3 panel"
> >>>> + depends on OF
> >>>> + depends on DRM_MIPI_DSI
> >>>> + depends on BACKLIGHT_CLASS_DEVICE
> >>>> + help
> >>>> + Say Y here if you want to enable support for the kingdisplay kd101ne3
> >>>> + 4-lane 800x1280 MIPI DSI panel.
> >>>> +
> >>>> config DRM_PANEL_LEADTEK_LTK050H3146W
> >>>> tristate "Leadtek LTK050H3146W panel"
> >>>> depends on OF
> >>>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> >>>> index f0203f6e02f4..4576c9fe33d9 100644
> >>>> --- a/drivers/gpu/drm/panel/Makefile
> >>>> +++ b/drivers/gpu/drm/panel/Makefile
> >>>> @@ -30,6 +30,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LPM102A188A) += panel-jdi-lpm102a188a.o
> >>>> obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
> >>>> obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
> >>>> obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> >>>> +obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD101NE3) += panel-kingdisplay-kd101ne3.o
> >>>> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> >>>> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> >>>> obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> >>>> diff --git a/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c b/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> >>>> new file mode 100644
> >>>> index 000000000000..8994a1c9afb5
> >>>> --- /dev/null
> >>>> +++ b/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> >>>> @@ -0,0 +1,533 @@
> >>>> +// SPDX-License-Identifier: GPL-2.0
> >>>> +/* Panels based on the JD9365DA display controller.
> >>>> + * Author: Zhaoxiong Lv <lvzhaoxiong@...qin.corp-partner.google.com>
> >>>> + */
> >>>> +
> >>>> +#include <linux/delay.h>
> >>>> +#include <linux/gpio/consumer.h>
> >>>> +#include <linux/module.h>
> >>>> +#include <linux/of.h>
> >>>> +#include <linux/regulator/consumer.h>
> >>>> +
> >>>> +#include <drm/drm_connector.h>
> >>>> +#include <drm/drm_crtc.h>
> >>>> +#include <drm/drm_mipi_dsi.h>
> >>>> +#include <drm/drm_panel.h>
> >>>> +
> >>>> +#include <video/mipi_display.h>
> >>>> +
> >>>> +struct kingdisplay_panel;
> >>>> +
> >>>> +struct panel_desc {
> >>>> + const struct drm_display_mode *modes;
> >>>> + unsigned int bpc;
> >>>> +
> >>>> + /**
> >>>> + * @width_mm: width of the panel's active display area
> >>>> + * @height_mm: height of the panel's active display area
> >>>> + */
> >>>> + struct {
> >>>> + unsigned int width_mm;
> >>>> + unsigned int height_mm;
> >>>> + } size;
> >>>> +
> >>>> + unsigned long mode_flags;
> >>>> + enum mipi_dsi_pixel_format format;
> >>>> + const struct panel_init_cmd *init_cmds;
> >>>> + int (*init)(struct kingdisplay_panel *kingdisplay);
> >>>> + unsigned int lanes;
> >>>> + bool discharge_on_disable;
> >>>> + bool lp11_before_reset;
> >>>> +};
> >>>> +
> >>>> +struct kingdisplay_panel {
> >>>> + struct drm_panel base;
> >>>> + struct mipi_dsi_device *dsi;
> >>>> +
> >>>> + const struct panel_desc *desc;
> >>>> +
> >>>> + enum drm_panel_orientation orientation;
> >>>> + struct regulator *pp3300;
> >>>> + struct gpio_desc *enable_gpio;
> >>>> +};
> >>>> +
> >>>> +static int kingdisplay_kd101ne3_init(struct kingdisplay_panel *kingdisplay)
> >>>> +{
> >>>> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = kingdisplay->dsi };
> >>>> +
> >>>> + /* T5:HWreset to init_code >= 50ms */
> >>>> + msleep(50);
> >>>> +
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe0, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe1, 0x93);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe2, 0x65);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe3, 0xf8);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x80, 0x03);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe0, 0x01);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0c, 0x74);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x17, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x18, 0xc7);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x19, 0x01);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1a, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1b, 0xc7);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1c, 0x01);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x24, 0xfe);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x37, 0x19);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x35, 0x28);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x38, 0x05);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x39, 0x08);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3a, 0x12);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3c, 0x7e);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3d, 0xff);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3e, 0xff);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3f, 0x7f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x40, 0x06);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x41, 0xa0);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x43, 0x1e);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x44, 0x0b);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x55, 0x02);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x57, 0x6a);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x59, 0x0a);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5a, 0x2e);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5b, 0x1a);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5c, 0x15);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5d, 0x7f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5e, 0x61);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5f, 0x50);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x60, 0x43);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x61, 0x3f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x62, 0x32);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x63, 0x35);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x64, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x65, 0x38);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x66, 0x36);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x67, 0x36);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x68, 0x54);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x69, 0x42);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6a, 0x48);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6b, 0x39);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6c, 0x34);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6d, 0x26);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6e, 0x14);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x02);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x70, 0x7f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x71, 0x61);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x72, 0x50);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x73, 0x43);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x74, 0x3f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x75, 0x32);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x76, 0x35);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x77, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x78, 0x38);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x79, 0x36);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x7a, 0x36);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x7b, 0x54);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x7c, 0x42);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x7d, 0x48);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x7e, 0x39);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x7f, 0x34);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x80, 0x26);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x81, 0x14);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x82, 0x02);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe0, 0x02);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x00, 0x52);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x01, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x02, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x03, 0x50);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x04, 0x77);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x05, 0x57);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x06, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x07, 0x4e);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x08, 0x4c);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x09, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0a, 0x4a);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0b, 0x48);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0c, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0d, 0x46);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0e, 0x44);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0f, 0x40);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x10, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x11, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x12, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x13, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x14, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x15, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x16, 0x53);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x17, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x18, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x19, 0x51);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1a, 0x77);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1b, 0x57);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1c, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1d, 0x4f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1e, 0x4d);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x1f, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x20, 0x4b);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x21, 0x49);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x22, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x23, 0x47);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x24, 0x45);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x25, 0x41);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x26, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x27, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x28, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x29, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x2a, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x2b, 0x5f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x2c, 0x13);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x2d, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x2e, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x2f, 0x01);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x30, 0x17);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x31, 0x17);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x32, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x33, 0x0d);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x34, 0x0f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x35, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x36, 0x05);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x37, 0x07);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x38, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x39, 0x09);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3a, 0x0b);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3b, 0x11);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3c, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3d, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3e, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x3f, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x40, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x41, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x42, 0x12);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x43, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x44, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x45, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x46, 0x17);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x47, 0x17);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x48, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x49, 0x0c);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4a, 0x0e);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4b, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4c, 0x04);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4d, 0x06);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4e, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4f, 0x08);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x50, 0x0a);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x51, 0x10);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x52, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x53, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x54, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x55, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x56, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x57, 0x1f);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x58, 0x40);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5b, 0x10);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5c, 0x06);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5d, 0x40);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5e, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x5f, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x60, 0x40);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x61, 0x03);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x62, 0x04);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x63, 0x6c);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x64, 0x6c);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x65, 0x75);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x66, 0x08);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x67, 0xb4);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x68, 0x08);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x69, 0x6c);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6a, 0x6c);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6b, 0x0c);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6d, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6e, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x88);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x75, 0xbb);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x76, 0x00);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x77, 0x05);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x78, 0x2a);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe0, 0x04);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x00, 0x0e);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x02, 0xb3);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x09, 0x61);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x0e, 0x48);
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe0, 0x00);
> >>> Looking at the init sequence, I'm pretty confident this panel uses a
> >>> Jadard JD 9365 driver IC. It's probably worth adding it to
> >>> panel-jadard-jd9365da instead of adding a completly new driver.
> >>>
> >>> Alex
> >>>> + if (dsi_ctx.accum_err)
> >>>> + return dsi_ctx.accum_err;
> >>>> +
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_EXIT_SLEEP_MODE);
> >>>> + if (dsi_ctx.accum_err)
> >>>> + return dsi_ctx.accum_err;
> >>>> +
> >>>> + msleep(120);
> >>>> +
> >>>> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_SET_DISPLAY_ON);
> >>>> + if (dsi_ctx.accum_err)
> >>>> + return dsi_ctx.accum_err;
> >>>> +
> >>>> + msleep(20);
> >>>> +
> >>>> + return 0;
> >>>> +};
> >>>> +
> >>>> +static inline struct kingdisplay_panel *to_kingdisplay_panel(struct drm_panel *panel)
> >>>> +{
> >>>> + return container_of(panel, struct kingdisplay_panel, base);
> >>>> +}
> >>>> +
> >>>> +static int kingdisplay_panel_disable(struct drm_panel *panel)
> >>>> +{
> >>>> + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> >>>> + int err;
> >>>> +
> >>>> + kingdisplay->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> >>>> +
> >>>> + msleep(100);
> >>>> +
> >>>> + err = mipi_dsi_dcs_set_display_off(kingdisplay->dsi);
> >>>> + if (err < 0)
> >>>> + dev_err(panel->dev, "failed to set display off: %d\n", err);
> >>>> +
> >>>> + msleep(50);
> >>>> +
> >>>> + err = mipi_dsi_dcs_enter_sleep_mode(kingdisplay->dsi);
> >>>> + if (err < 0) {
> >>>> + dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
> >>>> + return err;
> >>>> + }
> >>>> +
> >>>> + msleep(120);
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +static int kingdisplay_panel_unprepare(struct drm_panel *panel)
> >>>> +{
> >>>> + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> >>>> + int err;
> >>>> +
> >>>> + gpiod_set_value_cansleep(kingdisplay->enable_gpio, 0);
> >>>> +
> >>>> + /* T15: 2ms */
> >>>> + usleep_range(1000, 2000);
> >>>> +
> >>>> + err = regulator_disable(kingdisplay->pp3300);
> >>>> + if (err < 0)
> >>>> + return err;
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +static int kingdisplay_panel_prepare(struct drm_panel *panel)
> >>>> +{
> >>>> + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> >>>> + int err;
> >>>> +
> >>>> + gpiod_set_value(kingdisplay->enable_gpio, 0);
> >>>> +
> >>>> + err = regulator_enable(kingdisplay->pp3300);
> >>>> + if (err < 0)
> >>>> + return err;
> >>>> +
> >>>> + /* T1:Vdd to mipi_lp >= 0ms */
> >>>> + usleep_range(5000, 6000);
> >>>> +
> >>>> + if (kingdisplay->desc->lp11_before_reset) {
> >>>> + err = mipi_dsi_dcs_nop(kingdisplay->dsi);
> >>>> + if (err < 0)
> >>>> + goto poweroff;
> >>>> +
> >>>> + usleep_range(1000, 2000);
> >>>> + }
> >>>> +
> >>>> + /* T2: 10ms, T1 + T2 > 60ms */
> >>>> + msleep(60);
> >>>> +
> >>>> + gpiod_set_value_cansleep(kingdisplay->enable_gpio, 1);
> >>>> +
> >>>> + err = kingdisplay->desc->init(kingdisplay);
> >>>> + if (err < 0)
> >>>> + goto poweroff;
> >>>> +
> >>>> + return 0;
> >>>> +
> >>>> +poweroff:
> >>>> + gpiod_set_value(kingdisplay->enable_gpio, 0);
> >>>> + /* T6: 2ms */
> >>>> + usleep_range(1000, 2000);
> >>>> + regulator_disable(kingdisplay->pp3300);
> >>>> +
> >>>> + return err;
> >>>> +}
> >>>> +
> >>>> +static int kingdisplay_panel_enable(struct drm_panel *panel)
> >>>> +{
> >>>> + msleep(130);
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +static const struct drm_display_mode kingdisplay_kd101ne3_40ti_default_mode = {
> >>>> + .clock = 70595,
> >>>> + .hdisplay = 800,
> >>>> + .hsync_start = 800 + 30,
> >>>> + .hsync_end = 800 + 30 + 30,
> >>>> + .htotal = 800 + 30 + 30 + 30,
> >>>> + .vdisplay = 1280,
> >>>> + .vsync_start = 1280 + 30,
> >>>> + .vsync_end = 1280 + 30 + 4,
> >>>> + .vtotal = 1280 + 30 + 4 + 8,
> >>>> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> >>>> +};
> >>>> +
> >>>> +static const struct panel_desc kingdisplay_kd101ne3_40ti_desc = {
> >>>> + .modes = &kingdisplay_kd101ne3_40ti_default_mode,
> >>>> + .bpc = 8,
> >>>> + .size = {
> >>>> + .width_mm = 135,
> >>>> + .height_mm = 216,
> >>>> + },
> >>>> + .lanes = 4,
> >>>> + .format = MIPI_DSI_FMT_RGB888,
> >>>> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> >>>> + MIPI_DSI_MODE_LPM,
> >>>> + .init = kingdisplay_kd101ne3_init,
> >>>> + .lp11_before_reset = true,
> >>>> +};
> >>>> +
> >>>> +static int kingdisplay_panel_get_modes(struct drm_panel *panel,
> >>>> + struct drm_connector *connector)
> >>>> +{
> >>>> + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> >>>> + const struct drm_display_mode *m = kingdisplay->desc->modes;
> >>>> + struct drm_display_mode *mode;
> >>>> +
> >>>> + mode = drm_mode_duplicate(connector->dev, m);
> >>>> + if (!mode) {
> >>>> + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> >>>> + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> >>>> + return -ENOMEM;
> >>>> + }
> >>>> +
> >>>> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> >>>> + drm_mode_set_name(mode);
> >>>> + drm_mode_probed_add(connector, mode);
> >>>> +
> >>>> + connector->display_info.width_mm = kingdisplay->desc->size.width_mm;
> >>>> + connector->display_info.height_mm = kingdisplay->desc->size.height_mm;
> >>>> + connector->display_info.bpc = kingdisplay->desc->bpc;
> >>>> +
> >>>> + return 1;
> >>>> +}
> >>>> +
> >>>> +static enum drm_panel_orientation kingdisplay_panel_get_orientation(struct drm_panel *panel)
> >>>> +{
> >>>> + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> >>>> +
> >>>> + return kingdisplay->orientation;
> >>>> +}
> >>>> +
> >>>> +static const struct drm_panel_funcs kingdisplay_panel_funcs = {
> >>>> + .disable = kingdisplay_panel_disable,
> >>>> + .unprepare = kingdisplay_panel_unprepare,
> >>>> + .prepare = kingdisplay_panel_prepare,
> >>>> + .enable = kingdisplay_panel_enable,
> >>>> + .get_modes = kingdisplay_panel_get_modes,
> >>>> + .get_orientation = kingdisplay_panel_get_orientation,
> >>>> +};
> >>>> +
> >>>> +static int kingdisplay_panel_add(struct kingdisplay_panel *kingdisplay)
> >>>> +{
> >>>> + struct device *dev = &kingdisplay->dsi->dev;
> >>>> + int err;
> >>>> +
> >>>> + kingdisplay->pp3300 = devm_regulator_get(dev, "pp3300");
> >>>> + if (IS_ERR(kingdisplay->pp3300))
> >>>> + return dev_err_probe(dev, PTR_ERR(kingdisplay->pp3300),
> >>>> + "Cannot get pp3300\n");
> >>>> +
> >>>> + kingdisplay->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> >>>> + if (IS_ERR(kingdisplay->enable_gpio))
> >>>> + return dev_err_probe(dev, PTR_ERR(kingdisplay->enable_gpio),
> >>>> + "Cannot get enable GPIO\n");
> >>>> +
> >>>> + drm_panel_init(&kingdisplay->base, dev, &kingdisplay_panel_funcs,
> >>>> + DRM_MODE_CONNECTOR_DSI);
> >>>> +
> >>>> + err = of_drm_get_panel_orientation(dev->of_node, &kingdisplay->orientation);
> >>>> + if (err < 0) {
> >>>> + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
> >>>> + return err;
> >>>> + }
> >>>> +
> >>>> + err = drm_panel_of_backlight(&kingdisplay->base);
> >>>> + if (err)
> >>>> + return err;
> >>>> +
> >>>> + kingdisplay->base.funcs = &kingdisplay_panel_funcs;
> >>>> + kingdisplay->base.dev = &kingdisplay->dsi->dev;
> >>>> +
> >>>> + drm_panel_add(&kingdisplay->base);
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +static int kingdisplay_panel_probe(struct mipi_dsi_device *dsi)
> >>>> +{
> >>>> + struct kingdisplay_panel *kingdisplay;
> >>>> + int ret;
> >>>> + const struct panel_desc *desc;
> >>>> +
> >>>> + kingdisplay = devm_kzalloc(&dsi->dev, sizeof(*kingdisplay), GFP_KERNEL);
> >>>> + if (!kingdisplay)
> >>>> + return -ENOMEM;
> >>>> +
> >>>> + desc = of_device_get_match_data(&dsi->dev);
> >>>> + dsi->lanes = desc->lanes;
> >>>> + dsi->format = desc->format;
> >>>> + dsi->mode_flags = desc->mode_flags;
> >>>> + kingdisplay->desc = desc;
> >>>> + kingdisplay->dsi = dsi;
> >>>> + ret = kingdisplay_panel_add(kingdisplay);
> >>>> + if (ret < 0)
> >>>> + return ret;
> >>>> +
> >>>> + mipi_dsi_set_drvdata(dsi, kingdisplay);
> >>>> +
> >>>> + ret = mipi_dsi_attach(dsi);
> >>>> + if (ret)
> >>>> + drm_panel_remove(&kingdisplay->base);
> >>>> +
> >>>> + return ret;
> >>>> +}
> >>>> +
> >>>> +static void kingdisplay_panel_remove(struct mipi_dsi_device *dsi)
> >>>> +{
> >>>> + struct kingdisplay_panel *kingdisplay = mipi_dsi_get_drvdata(dsi);
> >>>> + int ret;
> >>>> +
> >>>> + ret = mipi_dsi_detach(dsi);
> >>>> + if (ret < 0)
> >>>> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
> >>>> +
> >>>> + if (kingdisplay->base.dev)
> >>>> + drm_panel_remove(&kingdisplay->base);
> >>>> +}
> >>>> +
> >>>> +static const struct of_device_id kingdisplay_of_match[] = {
> >>>> + { .compatible = "kingdisplay,kd101ne3-40ti",
> >>>> + .data = &kingdisplay_kd101ne3_40ti_desc
> >>>> + },
> >>>> + { /* sentinel */ }
> >>>> +};
> >>>> +MODULE_DEVICE_TABLE(of, kingdisplay_of_match);
> >>>> +
> >>>> +static struct mipi_dsi_driver kingdisplay_panel_driver = {
> >>>> + .driver = {
> >>>> + .name = "panel-kingdisplay-kd101ne3",
> >>>> + .of_match_table = kingdisplay_of_match,
> >>>> + },
> >>>> + .probe = kingdisplay_panel_probe,
> >>>> + .remove = kingdisplay_panel_remove,
> >>>> +};
> >>>> +module_mipi_dsi_driver(kingdisplay_panel_driver);
> >>>> +
> >>>> +MODULE_AUTHOR("Zhaoxiong Lv <lvzhaoxiong@...qin.corp-partner.google.com>");
> >>>> +MODULE_DESCRIPTION("kingdisplay kd101ne3-40ti 800x1280 video mode panel driver");
> >>>> +MODULE_LICENSE("GPL v2");
Powered by blists - more mailing lists