| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240612132409.2477888-5-s-vadapalli@ti.com>
Date: Wed, 12 Jun 2024 18:54:05 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <afd@...com>, <kristo@...nel.org>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<rogerq@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <u-kumar1@...com>,
<danishanwar@...com>, <srk@...com>, <s-vadapalli@...com>
Subject: [PATCH v6 4/8] arm64: dts: ti: k3-j722s: Switch to k3-am62p-j722s-common-{}.dtsi includes
Update "k3-j722s.dtsi" to include "k3-am62p-j722s-common-{}".dtsi files in
order to reuse the nodes shared with AM62P. Also include the J722S specific
"k3-j722s-main.dtsi".
Since the J7 family of SoCs has the k3-{soc}.dtsi file organized as:
k3-{soc}.dtsi = CPU + Cache + CBASS-Ranges + "Peripheral-Includes"
switch the "k3-j722s.dtsi" file to the same convention.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
v5:
https://lore.kernel.org/r/20240604085252.3686037-5-s-vadapalli@ti.com/
Changes since v5:
- Rather than including "k3-am62p-j722s-common.dtsi" which is the
equivalent of "k3-am62p.dtsi" in the current series, k3-j722s.dtsi
includes "k3-am62p-j722s-common-{}.dtsi" and "k3-j722s-main.dtsi".
Also, to match the J7 family of SoCs, the CPU, Cache and CBASS-Ranges
are included in "k3-j722s.dtsi".
arch/arm64/boot/dts/ti/k3-j722s.dtsi | 158 ++++++++++++++++++++++++++-
1 file changed, 157 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
index c75744edb143..1bcbc9152ff0 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
@@ -10,11 +10,133 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
-#include "k3-am62p5.dtsi"
+#include "k3-pinctrl.h"
/ {
model = "Texas Instruments K3 J722S SoC";
compatible = "ti,j722s";
+ interrupt-parent = <&gic500>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0: cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ clocks = <&k3_clks 135 0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ clocks = <&k3_clks 136 0>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53";
+ reg = <0x002>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ clocks = <&k3_clks 137 0>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53";
+ reg = <0x003>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ clocks = <&k3_clks 138 0>;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ psci: psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+ };
+
+ a53_timer0: timer-cl0-cpu0 {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
cbass_main: bus@...00 {
compatible = "simple-bus";
@@ -74,9 +196,43 @@ cbass_main: bus@...00 {
<0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
<0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>,
<0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>;
+
+ cbass_mcu: bus@...0000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */
+ <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+ <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+ <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
+ <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+ bootph-all;
+ };
+
+ cbass_wakeup: bus@...000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+ <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
+ <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+ <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+ bootph-all;
+ };
};
+
+ #include "k3-am62p-j722s-common-thermal.dtsi"
};
+/* Include peripherals shared with AM62P */
+#include "k3-am62p-j722s-common-main.dtsi"
+#include "k3-am62p-j722s-common-mcu.dtsi"
+#include "k3-am62p-j722s-common-wakeup.dtsi"
+
+/* Include J722S specific peripherals */
+#include "k3-j722s-main.dtsi"
+
/* Main domain overrides */
&inta_main_dmss {
--
2.40.1
Powered by blists - more mailing lists