[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240613174425.GV2561462@google.com>
Date: Thu, 13 Jun 2024 18:44:25 +0100
From: Lee Jones <lee@...nel.org>
To: Johan Hovold <johan+linaro@...nel.org>
Cc: Mark Brown <broonie@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>,
Linus Walleij <linus.walleij@...aro.org>,
Stephen Boyd <swboyd@...omium.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 00/12] arm64: dts: qcom: sc8280xp-x13s: enable pm8008
camera pmic
On Sat, 08 Jun 2024, Johan Hovold wrote:
> The Qualcomm PM8008 PMIC is a so called QPNP PMIC with seven LDO
> regulators, a temperature alarm block and two GPIO pins (which are also
> used for interrupt signalling and reset).
[...]
> Johan
>
> [1] https://lore.kernel.org/all/1655200111-18357-1-git-send-email-quic_c_skakit@quicinc.com
> [2] https://lore.kernel.org/lkml/20231003152927.15000-3-johan+linaro@kernel.org
> [3] https://lore.kernel.org/r/20220828132648.3624126-3-bryan.odonoghue@linaro.org
>
>
> Changes in v3
> - capitalise MFD commit summaries
> - drop pinctrl patches which have been applied for 6.10
> - amend binding commit message to clarify that the binding is unused
> - move pinctrl subschema under pinctrl node in binding
>
> Changes in v2
> - use IRQ_TYPE_SENSE_MASK in regmap_irq table
> - add post-reset delay
> - reorder pinctrl binding and driver update
> - split out binding cleanups
> - use platform_device_id matching
> - replace underscore in supply names with dash
> - use more fine-grained includes in regulator driver
> - rework regulator driver and update authorship
>
>
> Johan Hovold (12):
> dt-bindings: mfd: pm8008: Add reset gpio
> mfd: pm8008: Fix regmap irq chip initialisation
> mfd: pm8008: Deassert reset on probe
> mfd: pm8008: Mark regmap structures as const
> mfd: pm8008: Use lower case hex notation
> mfd: pm8008: Rename irq chip
> mfd: pm8008: Drop unused driver data
> dt-bindings: mfd: pm8008: Drop redundant descriptions
> dt-bindings: mfd: pm8008: Rework binding
> mfd: pm8008: Rework to match new DT binding
> regulator: add pm8008 pmic regulator driver
> arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic
>
> .../devicetree/bindings/mfd/qcom,pm8008.yaml | 144 +++++++------
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 123 +++++++++++
> drivers/mfd/Kconfig | 1 +
> drivers/mfd/qcom-pm8008.c | 169 ++++++++++-----
> drivers/regulator/Kconfig | 7 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/qcom-pm8008-regulator.c | 198 ++++++++++++++++++
> include/dt-bindings/mfd/qcom-pm8008.h | 19 --
> 8 files changed, 532 insertions(+), 130 deletions(-)
> create mode 100644 drivers/regulator/qcom-pm8008-regulator.c
> delete mode 100644 include/dt-bindings/mfd/qcom-pm8008.h
Applied patches 1-11 and submitted for build testing.
Once complete, I'll get the pull-request out for Mark.
--
Lee Jones [李琼斯]
Powered by blists - more mailing lists