[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240613190429.GA2309072-robh@kernel.org>
Date: Thu, 13 Jun 2024 13:04:29 -0600
From: Rob Herring <robh@...nel.org>
To: Jiaxun Yang <jiaxun.yang@...goat.com>
Cc: Lee Jones <lee@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Paul Burton <paulburton@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org
Subject: Re: [PATCH v2 6/8] dt-bindings: mfd: Add img,boston-platform-regs
On Wed, Jun 12, 2024 at 12:56:25PM +0100, Jiaxun Yang wrote:
> This compatible has been used in arch/mips/boot/dts/img/boston.dts
> for a while but never documented properly.
>
> Write a new binding for this device.
> This also covers old img,boston-clock binding so remove that binding.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@...goat.com>
> ---
> .../devicetree/bindings/clock/img,boston-clock.txt | 31 ---------
> .../bindings/mfd/img,boston-platform-regs.yaml | 74 ++++++++++++++++++++++
> 2 files changed, 74 insertions(+), 31 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
> deleted file mode 100644
> index 7bc5e9ffb624..000000000000
> --- a/Documentation/devicetree/bindings/clock/img,boston-clock.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -Binding for Imagination Technologies MIPS Boston clock sources.
> -
> -This binding uses the common clock binding[1].
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -The device node must be a child node of the syscon node corresponding to the
> -Boston system's platform registers.
> -
> -Required properties:
> -- compatible : Should be "img,boston-clock".
> -- #clock-cells : Should be set to 1.
> - Values available for clock consumers can be found in the header file:
> - <dt-bindings/clock/boston-clock.h>
> -
> -Example:
> -
> - system-controller@...fd000 {
> - compatible = "img,boston-platform-regs", "syscon";
> - reg = <0x17ffd000 0x1000>;
> -
> - clk_boston: clock {
> - compatible = "img,boston-clock";
> - #clock-cells = <1>;
> - };
> - };
> -
> - uart0: uart@...fe000 {
> - /* ... */
> - clocks = <&clk_boston BOSTON_CLK_SYS>;
> - };
> diff --git a/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml b/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml
> new file mode 100644
> index 000000000000..bf94de38a89f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/img,boston-platform-regs.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/img,boston-platform-regs.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Imagination Technologies Boston Platform Registers
> +
> +maintainers:
> + - Jiaxun Yang <jiaxun.yang@...goat.com>
> +
> +properties:
> + compatible:
> + items:
> + - const: img,boston-platform-regs
> + - const: syscon
> + - const: simple-mfd
Why did you add 'simple-mfd'? That's not what is in use.
> +
> + reg:
> + maxItems: 1
> +
> + clock:
Really should be 'clock-controller', but if you don't plan to update the
DTS, then it is fine as-is.
> + type: object
> +
> + description: Boston Clock Controller Device Node
> + The clock consumer should specify the desired clock by having the clock
> + ID in its "clocks" phandle cell.
> + See include/dt-bindings/clock/boston-clock.h for the full list of boston
> + clock IDs.
> +
> + properties:
> + "#clock-cells":
> + const: 1
> +
> + compatible:
> + const: img,boston-clock
> +
> + required:
> + - "#clock-cells"
> + - compatible
> +
> + additionalProperties: false
> +
> + syscon-reboot:
Just 'reboot'
> + $ref: /schemas/power/reset/syscon-reboot.yaml#
> +
> +required:
> + - compatible
> + - reg
> + - clock
> + - syscon-reboot
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/boston-clock.h>
> +
> + plat_regs: system-controller@...fd000 {
> + compatible = "img,boston-platform-regs", "syscon", "simple-mfd";
> + reg = <0x17ffd000 0x1000>;
> +
> + clk_boston: clock {
> + compatible = "img,boston-clock";
> + #clock-cells = <1>;
> + };
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&plat_regs>;
> + offset = <0x10>;
> + mask = <0x10>;
> + };
> + };
>
> --
> 2.43.0
>
Powered by blists - more mailing lists