| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <878qz9jowi.fsf@BLR-5CG11610CF.amd.com>
Date: Thu, 13 Jun 2024 12:43:49 +0530
From: Gautham R.Shenoy <gautham.shenoy@....com>
To: Perry Yuan <perry.yuan@....com>, <Mario.Limonciello@....com>
CC: <rafael.j.wysocki@...el.com>, <viresh.kumar@...aro.org>,
<Ray.Huang@....com>, <Borislav.Petkov@....com>, <Alexander.Deucher@....com>,
<Xinmei.Huang@....com>, <Xiaojian.Du@....com>, <Li.Meng@....com>,
<linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 09/10] cpufreq: amd-pstate: implement heterogeneous
core topology for highest performance initialization
Perry Yuan <perry.yuan@....com> writes:
> Introduces an optimization to the AMD-Pstate driver by implementing
> a heterogeneous core topology for the initialization of the highest
> performance value while driver loading.
> There are two type cores designed including performance core and
> Efficiency Core.
> Each core type has different highest performance and frequency values
> configured by the platform. The `amd_pstate` driver needs to identify
> the type of core to correctly set an appropriate highest perf value.
>
> X86_FEATURE_HETERO_CORE_TOPOLOGY is used to identify whether the
> processor support heterogeneous core type by reading CPUID leaf
> Fn_0x80000026_EAX and bit 30. if the bit is set as one, then amd_pstate
> driver will check EBX 30:28 bits to get the core type.
>
> PDF p274
>
> Link: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/24593.pdf
> Signed-off-by: Perry Yuan <perry.yuan@....com>
> ---
> arch/x86/include/asm/processor.h | 2 +
> arch/x86/kernel/cpu/amd.c | 19 +++++++++
> drivers/cpufreq/amd-pstate.c | 67 ++++++++++++++++++++++++--------
> 3 files changed, 72 insertions(+), 16 deletions(-)
>
> diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
> index cb4f6c513c48..223aa58e2d5c 100644
> --- a/arch/x86/include/asm/processor.h
> +++ b/arch/x86/include/asm/processor.h
> @@ -694,10 +694,12 @@ static inline u32 per_cpu_l2c_id(unsigned int cpu)
> extern u32 amd_get_highest_perf(void);
> extern void amd_clear_divider(void);
> extern void amd_check_microcode(void);
> +extern int amd_get_this_core_type(void);
> #else
> static inline u32 amd_get_highest_perf(void) { return 0; }
> static inline void amd_clear_divider(void) { }
> static inline void amd_check_microcode(void) { }
> +static inline int amd_get_this_core_type(void) { return -1; }
> #endif
>
> extern unsigned long arch_align_stack(unsigned long sp);
> diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
> index 44df3f11e731..62a4ef21ef79 100644
> --- a/arch/x86/kernel/cpu/amd.c
> +++ b/arch/x86/kernel/cpu/amd.c
> @@ -1231,3 +1231,22 @@ void noinstr amd_clear_divider(void)
> :: "a" (0), "d" (0), "r" (1));
> }
> EXPORT_SYMBOL_GPL(amd_clear_divider);
> +
> +#define X86_CPU_TYPE_ID_SHIFT 28
> +
> +/**
> + * amd_get_this_core_type - Get the type of this heterogeneous CPU
> + *
> + * Returns the CPU type [31:28] (i.e., performance or efficient) of
> + * a CPU in the processor.
> + * If the processor has no core type support, returns -1.
> + */
> +
> +int amd_get_this_core_type(void)
> +{
> + if (!cpu_feature_enabled(X86_FEATURE_HETERO_CORE_TOPOLOGY))
> + return -1;
> +
> + return cpuid_ebx(0x80000026) >> X86_CPU_TYPE_ID_SHIFT;
> +}
The 0x80000026 parser doesn't have support for discovering and recording
the heterogenous stuff _yet_. Eventually I suppose it will get that and
until then amd-pstate will have to discover the core type by itself.
Even this, I find the bitfield way of doing things more cleaner instead
of using shifts and masks. Something like...
int amd_get_this_core_type(void)
{
struct {
u32 num_processors :16,
power_efficiency_ranking :8,
native_model_id :4,
core_type :4;
} props;
if (!cpu_feature_enabled(X86_FEATURE_HETERO_CORE_TOPOLOGY))
return -1;
cpuid_leaf_reg(0x80000026, CPUID_EBX, &props);
return props->core_type;
}
> +EXPORT_SYMBOL_GPL(amd_get_this_core_type);
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index cb59de71b6ee..fa486dfaa7e8 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -51,8 +51,9 @@
>
> #define AMD_PSTATE_TRANSITION_LATENCY 20000
> #define AMD_PSTATE_TRANSITION_DELAY 1000
> -#define CPPC_HIGHEST_PERF_PERFORMANCE 196
> -#define CPPC_HIGHEST_PERF_DEFAULT 166
> +#define CPPC_HIGHEST_PERF_EFFICIENT 132
> +#define CPPC_HIGHEST_PERF_PERFORMANCE 196
> +#define CPPC_HIGHEST_PERF_DEFAULT 166
>
> #define AMD_CPPC_EPP_PERFORMANCE 0x00
> #define AMD_CPPC_EPP_BALANCE_PERFORMANCE 0x80
> @@ -85,6 +86,14 @@ struct quirk_entry {
> u32 lowest_freq;
> };
>
> +/* defined by CPUID_Fn80000026_EBX BIT [31:28] */
> +enum amd_core_type {
> + CPU_CORE_TYPE_NO_HETERO_SUP = -1,
> + CPU_CORE_TYPE_PERFORMANCE = 0,
> + CPU_CORE_TYPE_EFFICIENCY = 1,
> + CPU_CORE_TYPE_UNDEFINED = 2,
> +};
> +
> /*
> * TODO: We need more time to fine tune processors with shared memory solution
> * with community together.
> @@ -359,9 +368,27 @@ static inline int amd_pstate_enable(bool enable)
> return static_call(amd_pstate_enable)(enable);
> }
>
> +static void get_this_core_type(void *data)
> +{
> + int *cpu_type = data;
> +
> + *cpu_type = amd_get_this_core_type();
> +}
> +
> +static int amd_pstate_get_cpu_type(int cpu)
> +{
> + int cpu_type = 0;
> +
> + smp_call_function_single(cpu, get_this_core_type, &cpu_type, 1);
> +
> + return cpu_type;
> +}
> +
> static u32 amd_pstate_highest_perf_set(struct amd_cpudata *cpudata)
> {
> struct cpuinfo_x86 *c = &cpu_data(0);
> + u32 highest_perf;
> + int core_type;
>
> /*
> * For AMD CPUs with Family ID 19H and Model ID range 0x70 to 0x7f,
> @@ -371,7 +398,26 @@ static u32 amd_pstate_highest_perf_set(struct amd_cpudata *cpudata)
> if (c->x86 == 0x19 && (c->x86_model >= 0x70 && c->x86_model <= 0x7f))
> return CPPC_HIGHEST_PERF_PERFORMANCE;
>
> - return CPPC_HIGHEST_PERF_DEFAULT;
> + core_type = amd_pstate_get_cpu_type(cpudata->cpu);
> + pr_debug("core_type %d found\n", core_type);
> +
> + switch (core_type) {
> + case CPU_CORE_TYPE_NO_HETERO_SUP:
> + highest_perf = CPPC_HIGHEST_PERF_DEFAULT;
> + break;
> + case CPU_CORE_TYPE_PERFORMANCE:
> + highest_perf = CPPC_HIGHEST_PERF_PERFORMANCE;
> + break;
> + case CPU_CORE_TYPE_EFFICIENCY:
> + highest_perf = CPPC_HIGHEST_PERF_EFFICIENT;
> + break;
> + default:
> + highest_perf = CPPC_HIGHEST_PERF_DEFAULT;
> + WARN_ONCE(true, "WARNING: Undefined core type found");
> + break;
> + }
> +
> + return highest_perf;
> }
>
> static int pstate_init_perf(struct amd_cpudata *cpudata)
> @@ -384,15 +430,7 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
> if (ret)
> return ret;
>
> - /* For platforms that do not support the preferred core feature, the
> - * highest_pef may be configured with 166 or 255, to avoid max frequency
> - * calculated wrongly. we take the AMD_CPPC_HIGHEST_PERF(cap1) value as
> - * the default max perf.
> - */
> - if (cpudata->hw_prefcore)
> - highest_perf = amd_pstate_highest_perf_set(cpudata);
> - else
> - highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
> + highest_perf = amd_pstate_highest_perf_set(cpudata);
Without this patch, on systems without hw_prefcore, highest_perf would
be derived from MSR_AMD_CPPC_CAP1. The value of the highest_perf could
have been 255.
This patch changes the behaviour and sets the default value to
CPPC_HIGHEST_PERF_DEFAULT which is only 196. Am I missing something ?
>
> WRITE_ONCE(cpudata->highest_perf, highest_perf);
> WRITE_ONCE(cpudata->max_limit_perf, highest_perf);
> @@ -413,10 +451,7 @@ static int cppc_init_perf(struct amd_cpudata *cpudata)
> if (ret)
> return ret;
>
> - if (cpudata->hw_prefcore)
> - highest_perf = amd_pstate_highest_perf_set(cpudata);
> - else
> - highest_perf = cppc_perf.highest_perf;
> + highest_perf = amd_pstate_highest_perf_set(cpudata);
Same comment as above here.
>
> WRITE_ONCE(cpudata->highest_perf, highest_perf);
> WRITE_ONCE(cpudata->max_limit_perf, highest_perf);
> --
> 2.34.1
Powered by blists - more mailing lists