lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3b7950db-bde8-407e-b568-51cacee93ad8@linux.alibaba.com>
Date: Thu, 13 Jun 2024 17:24:14 +0800
From: Baolin Wang <baolin.wang@...ux.alibaba.com>
To: Trevor Gamblin <tgamblin@...libre.com>,
 Lucas Stankus <lucas.p.stankus@...il.com>,
 Lars-Peter Clausen <lars@...afoo.de>,
 Michael Hennerich <Michael.Hennerich@...log.com>,
 Jonathan Cameron <jic23@...nel.org>,
 Dmitry Rokosov <ddrokosov@...rdevices.ru>,
 Cosmin Tanislav <cosmin.tanislav@...log.com>, Chen-Yu Tsai <wens@...e.org>,
 Hans de Goede <hdegoede@...hat.com>, Ray Jui <rjui@...adcom.com>,
 Scott Branden <sbranden@...adcom.com>,
 Broadcom internal kernel review list
 <bcm-kernel-feedback-list@...adcom.com>, Shawn Guo <shawnguo@...nel.org>,
 Sascha Hauer <s.hauer@...gutronix.de>,
 Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>,
 Neil Armstrong <neil.armstrong@...aro.org>,
 Kevin Hilman <khilman@...libre.com>, Jerome Brunet <jbrunet@...libre.com>,
 Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
 Saravanan Sekar <sravanhome@...il.com>, Orson Zhai <orsonzhai@...il.com>,
 Chunyan Zhang <zhang.lyra@...il.com>,
 Maxime Coquelin <mcoquelin.stm32@...il.com>,
 Alexandre Torgue <alexandre.torgue@...s.st.com>, Nuno Sá
 <nuno.sa@...log.com>, Linus Walleij <linus.walleij@...aro.org>,
 Jean-Baptiste Maneyrol <jmaneyrol@...ensense.com>, Crt Mori <cmo@...exis.com>
Cc: Uwe Kleine-König <u.kleine-koenig@...libre.com>,
 linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
 linux-amlogic@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
 linux-stm32@...md-mailman.stormreply.com
Subject: Re: [RESEND][PATCH] iio: simplify with regmap_set_bits(),
 regmap_clear_bits()



On 2024/6/12 00:52, Trevor Gamblin wrote:
> Simplify the way regmap is accessed in iio drivers.
> 
> Instead of using regmap_update_bits() and passing the mask twice, use
> regmap_set_bits().
> 
> Instead of using regmap_update_bits() and passing val = 0, use
> regmap_clear_bits().
> 
> Suggested-by: Uwe Kleine-König <u.kleine-koenig@...libre.com>
> Signed-off-by: Trevor Gamblin <tgamblin@...libre.com>
> ---

[...]

> diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
> index b4a2e057d80f..2535c2c3e60b 100644
> --- a/drivers/iio/adc/sc27xx_adc.c
> +++ b/drivers/iio/adc/sc27xx_adc.c
> @@ -508,13 +508,13 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
>   		}
>   	}
>   
> -	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> -				 SC27XX_ADC_EN, SC27XX_ADC_EN);
> +	ret = regmap_set_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> +			      SC27XX_ADC_EN);
>   	if (ret)
>   		goto regulator_restore;
>   
> -	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
> -				 SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
> +	ret = regmap_set_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
> +			      SC27XX_ADC_IRQ_CLR);
>   	if (ret)
>   		goto disable_adc;
>   
> @@ -537,8 +537,8 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
>   	if (ret)
>   		goto disable_adc;
>   
> -	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> -				 SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN);
> +	ret = regmap_set_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> +			      SC27XX_ADC_CHN_RUN);
>   	if (ret)
>   		goto disable_adc;
>   
> @@ -559,8 +559,8 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
>   	value &= SC27XX_ADC_DATA_MASK;
>   
>   disable_adc:
> -	regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> -			   SC27XX_ADC_EN, 0);
> +	regmap_clear_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> +			  SC27XX_ADC_EN);
>   regulator_restore:
>   	if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) {
>   		ret_volref = regulator_set_voltage(data->volref,
> @@ -765,15 +765,14 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
>   {
>   	int ret;
>   
> -	ret = regmap_update_bits(data->regmap, data->var_data->module_en,
> -				 SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
> +	ret = regmap_set_bits(data->regmap, data->var_data->module_en,
> +			      SC27XX_MODULE_ADC_EN);
>   	if (ret)
>   		return ret;
>   
>   	/* Enable ADC work clock and controller clock */
> -	ret = regmap_update_bits(data->regmap, data->var_data->clk_en,
> -				 SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
> -				 SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
> +	ret = regmap_set_bits(data->regmap, data->var_data->clk_en,
> +			      SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
>   	if (ret)
>   		goto disable_adc;
>   
> @@ -789,11 +788,11 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
>   	return 0;
>   
>   disable_clk:
> -	regmap_update_bits(data->regmap, data->var_data->clk_en,
> -			   SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->clk_en,
> +			  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
>   disable_adc:
> -	regmap_update_bits(data->regmap, data->var_data->module_en,
> -			   SC27XX_MODULE_ADC_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->module_en,
> +			  SC27XX_MODULE_ADC_EN);
>   
>   	return ret;
>   }
> @@ -803,11 +802,11 @@ static void sc27xx_adc_disable(void *_data)
>   	struct sc27xx_adc_data *data = _data;
>   
>   	/* Disable ADC work clock and controller clock */
> -	regmap_update_bits(data->regmap, data->var_data->clk_en,
> -			   SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->clk_en,
> +			  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
>   
> -	regmap_update_bits(data->regmap, data->var_data->module_en,
> -			   SC27XX_MODULE_ADC_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->module_en,
> +			  SC27XX_MODULE_ADC_EN);
>   }
>   
>   static const struct sc27xx_adc_variant_data sc2731_data = {

For SPRD sc27xx parts, looks good to me. Thanks.
Reviewed-by: Baolin Wang <baolin.wang@...ux.alibaba.com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ