| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 13 Jun 2024 09:43:11 +0800
From: Chen Wang <unicornxw@...il.com>
To: adrian.hunter@...el.com,
aou@...s.berkeley.edu,
conor+dt@...nel.org,
guoren@...nel.org,
inochiama@...look.com,
jszhang@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
palmer@...belt.com,
paul.walmsley@...ive.com,
robh@...nel.org,
ulf.hansson@...aro.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org,
linux-riscv@...ts.infradead.org,
chao.wei@...hgo.com,
haijiao.liu@...hgo.com,
xiaoguang.xing@...hgo.com,
tingzhu.wang@...hgo.com
Cc: Chen Wang <unicorn_wang@...look.com>
Subject: [PATCH v3 3/4] mmc: sdhci-of-dwcmshc: extract init function for rk35xx/th1520
From: Chen Wang <unicorn_wang@...look.com>
Extract init function for rk35xx/th1520, which is an intermediate
process before further optimization.
Signed-off-by: Chen Wang <unicorn_wang@...look.com>
---
drivers/mmc/host/sdhci-of-dwcmshc.c | 83 ++++++++++++++++-------------
1 file changed, 46 insertions(+), 37 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 346d2d323a05..38ab755aa044 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -749,10 +749,19 @@ static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask)
sdhci_reset(host, mask);
}
-static int rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
+static int rk35xx_init(struct device *dev, struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
{
int err;
- struct rk35xx_priv *priv = dwc_priv->priv;
+ struct rk35xx_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (of_device_is_compatible(dev->of_node, "rockchip,rk3588-dwcmshc"))
+ priv->devtype = DWCMSHC_RK3588;
+ else
+ priv->devtype = DWCMSHC_RK3568;
priv->reset = devm_reset_control_array_get_optional_exclusive(mmc_dev(host->mmc));
if (IS_ERR(priv->reset)) {
@@ -787,6 +796,8 @@ static int rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_STRBIN);
+ dwc_priv->priv = priv;
+
return 0;
}
@@ -915,6 +926,35 @@ static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask)
}
}
+static int th1520_init(struct device *dev,
+ struct sdhci_host *host,
+ struct dwcmshc_priv *dwc_priv)
+{
+ dwc_priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
+
+ if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
+ device_property_read_bool(dev, "mmc-hs200-1_8v") ||
+ device_property_read_bool(dev, "mmc-hs400-1_8v"))
+ dwc_priv->flags |= FLAG_IO_FIXED_1V8;
+ else
+ dwc_priv->flags &= ~FLAG_IO_FIXED_1V8;
+
+ /*
+ * start_signal_voltage_switch() will try 3.3V first
+ * then 1.8V. Use SDHCI_SIGNALING_180 rather than
+ * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
+ * in sdhci_start_signal_voltage_switch().
+ */
+ if (dwc_priv->flags & FLAG_IO_FIXED_1V8) {
+ host->flags &= ~SDHCI_SIGNALING_330;
+ host->flags |= SDHCI_SIGNALING_180;
+ }
+
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
static void cv18xx_sdhci_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1230,46 +1270,15 @@ static int dwcmshc_probe(struct platform_device *pdev)
host->mmc_host_ops.execute_tuning = dwcmshc_execute_tuning;
if (pltfm_data == &sdhci_dwcmshc_rk35xx_pdata) {
- rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
- if (!rk_priv) {
- err = -ENOMEM;
- goto err_clk;
- }
-
- if (of_device_is_compatible(pdev->dev.of_node, "rockchip,rk3588-dwcmshc"))
- rk_priv->devtype = DWCMSHC_RK3588;
- else
- rk_priv->devtype = DWCMSHC_RK3568;
-
- priv->priv = rk_priv;
-
- err = rk35xx_init(host, priv);
+ err = rk35xx_init(&pdev->dev, host, priv);
if (err)
goto err_clk;
}
if (pltfm_data == &sdhci_dwcmshc_th1520_pdata) {
- priv->delay_line = PHY_SDCLKDL_DC_DEFAULT;
-
- if (device_property_read_bool(dev, "mmc-ddr-1_8v") ||
- device_property_read_bool(dev, "mmc-hs200-1_8v") ||
- device_property_read_bool(dev, "mmc-hs400-1_8v"))
- priv->flags |= FLAG_IO_FIXED_1V8;
- else
- priv->flags &= ~FLAG_IO_FIXED_1V8;
-
- /*
- * start_signal_voltage_switch() will try 3.3V first
- * then 1.8V. Use SDHCI_SIGNALING_180 rather than
- * SDHCI_SIGNALING_330 to avoid setting voltage to 3.3V
- * in sdhci_start_signal_voltage_switch().
- */
- if (priv->flags & FLAG_IO_FIXED_1V8) {
- host->flags &= ~SDHCI_SIGNALING_330;
- host->flags |= SDHCI_SIGNALING_180;
- }
-
- sdhci_enable_v4_mode(host);
+ err = th1520_init(&pdev->dev, host, priv);
+ if (err)
+ goto err_clk;
}
#ifdef CONFIG_ACPI
--
2.25.1
Powered by blists - more mailing lists