linux-kernel - [PATCH v2] ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240613020725.27874-1-jiaxin.yu@mediatek.com>
Date: Thu, 13 Jun 2024 10:07:25 +0800
From: Jiaxin Yu <jiaxin.yu@...iatek.com>
To: <broonie@...nel.org>
CC: <linux-sound@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-mediatek@...ts.infradead.org>,
	<angelogioacchino.delregno@...labora.com>, Jiaxin Yu <jiaxin.yu@...iatek.com>
Subject: [PATCH v2] ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode.

There are two hardware connection methods for DMICs on the MT6358. In cases
where more than two DMICs are used, we need to time-multiplex these DMICs.
Therefore, we need to dynamically switch the modes of these DMICs based on
the actual usage scenarios.

            ---- DMIC1
AU_VIN0 ---
            ---- DMIC2

AU_VIN2 --- ----DMIC3

When we want to use DMIC1/2, configure it to one-wire mode. When we want to
use DMIC1/3, configure it to two-wire mode.

Signed-off-by: Jiaxin Yu <jiaxin.yu@...iatek.com>
---
 sound/soc/codecs/mt6358.c | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/mt6358.c b/sound/soc/codecs/mt6358.c
index 0284e29c11d3..9247b90d1b99 100644
--- a/sound/soc/codecs/mt6358.c
+++ b/sound/soc/codecs/mt6358.c
@@ -96,7 +96,7 @@ struct mt6358_priv {
 
 	int wov_enabled;
 
-	unsigned int dmic_one_wire_mode;
+	int dmic_one_wire_mode;
 };
 
 int mt6358_set_mtkaif_protocol(struct snd_soc_component *cmpnt,
@@ -577,6 +577,39 @@ static int mt6358_put_wov(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int mt6358_dmic_mode_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
+	struct mt6358_priv *priv = snd_soc_component_get_drvdata(c);
+
+	ucontrol->value.integer.value[0] = priv->dmic_one_wire_mode;
+	dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+	return 0;
+}
+
+static int mt6358_dmic_mode_set(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
+	struct mt6358_priv *priv = snd_soc_component_get_drvdata(c);
+	int enabled = ucontrol->value.integer.value[0];
+
+	if (enabled < 0 || enabled > 1)
+		return -EINVAL;
+
+	if (priv->dmic_one_wire_mode != enabled) {
+		priv->dmic_one_wire_mode = enabled;
+		dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+		return 1;
+	}
+	dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+	return 0;
+}
+
 static const DECLARE_TLV_DB_SCALE(playback_tlv, -1000, 100, 0);
 static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 600, 0);
 
@@ -599,6 +632,9 @@ static const struct snd_kcontrol_new mt6358_snd_controls[] = {
 
 	SOC_SINGLE_BOOL_EXT("Wake-on-Voice Phase2 Switch", 0,
 			    mt6358_get_wov, mt6358_put_wov),
+
+	SOC_SINGLE_BOOL_EXT("Dmic Mode Switch", 0,
+			    mt6358_dmic_mode_get, mt6358_dmic_mode_set),
 };
 
 /* MUX */
-- 
2.25.1