| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240614-ls3k-mips-v1-2-7614340ace7d@flygoat.com>
Date: Fri, 14 Jun 2024 16:40:10 +0100
From: Jiaxun Yang <jiaxun.yang@...goat.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Qing Zhang <zhangqing@...ngson.cn>, Binbin Zhou <zhoubinbin@...ngson.cn>,
Huacai Chen <chenhuacai@...nel.org>
Cc: devicetree@...r.kernel.org, linux-mips@...r.kernel.org,
linux-kernel@...r.kernel.org, Jiaxun Yang <jiaxun.yang@...goat.com>,
stable@...r.kernel.org
Subject: [PATCH 02/10] MIPS: dts: loongson: Fix liointc IRQ polarity
All internal liointc interrupts are high level triggered.
Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@...r.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@...goat.com>
---
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 42 +++++++++++-----------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index f5a74338bf05..3f5255584c30 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -93,7 +93,7 @@ rtc0: rtc@...07800 {
compatible = "loongson,ls2k1000-rtc";
reg = <0 0x1fe07800 0 0x78>;
interrupt-parent = <&liointc0>;
- interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
};
uart0: serial@...00000 {
@@ -101,7 +101,7 @@ uart0: serial@...00000 {
reg = <0 0x1fe00000 0 0x8>;
clock-frequency = <125000000>;
interrupt-parent = <&liointc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
@@ -124,8 +124,8 @@ gmac@3,0 {
"pciclass0c03";
reg = <0x1800 0x0 0x0 0x0 0x0>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
- <13 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
phy-mode = "rgmii";
@@ -147,8 +147,8 @@ gmac@3,1 {
"loongson, pci-gmac";
reg = <0x1900 0x0 0x0 0x0 0x0>;
- interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
- <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
phy-mode = "rgmii";
@@ -169,7 +169,7 @@ ehci@4,1 {
"pciclass0c03";
reg = <0x2100 0x0 0x0 0x0 0x0>;
- interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
};
@@ -180,7 +180,7 @@ ohci@4,2 {
"pciclass0c03";
reg = <0x2200 0x0 0x0 0x0 0x0>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
};
@@ -191,7 +191,7 @@ sata@8,0 {
"pciclass0106";
reg = <0x4000 0x0 0x0 0x0 0x0>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc0>;
};
@@ -206,10 +206,10 @@ pcie@9,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -225,10 +225,10 @@ pcie@a,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -244,10 +244,10 @@ pcie@b,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -263,10 +263,10 @@ pcie@c,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -282,10 +282,10 @@ pcie@d,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -301,10 +301,10 @@ pcie@e,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
--
2.43.0
Powered by blists - more mailing lists