| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<AM9PR04MB8604C70BF200C4A02E93971795C22@AM9PR04MB8604.eurprd04.prod.outlook.com>
Date: Fri, 14 Jun 2024 08:56:00 +0000
From: Pankaj Gupta <pankaj.gupta@....com>
To: Sascha Hauer <s.hauer@...gutronix.de>
CC: Jonathan Corbet <corbet@....net>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Pengutronix Kernel
Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>, Rob Herring
<robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>
Subject: RE: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP
EdgeLock Enclave
> -----Original Message-----
> From: Sascha Hauer <s.hauer@...gutronix.de>
> Sent: Friday, May 24, 2024 2:37 PM
> To: Pankaj Gupta <pankaj.gupta@....com>
> Cc: Jonathan Corbet <corbet@....net>; Rob Herring <robh+dt@...nel.org>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>; Conor Dooley
> <conor+dt@...nel.org>; Shawn Guo <shawnguo@...nel.org>; Pengutronix
> Kernel Team <kernel@...gutronix.de>; Fabio Estevam
> <festevam@...il.com>; Rob Herring <robh@...nel.org>; Krzysztof
> Kozlowski <krzk+dt@...nel.org>; linux-doc@...r.kernel.org; linux-
> kernel@...r.kernel.org; devicetree@...r.kernel.org; imx@...ts.linux.dev;
> linux-arm-kernel@...ts.infradead.org
> Subject: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock
> Enclave
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On Thu, May 23, 2024 at 04:19:35PM +0530, Pankaj Gupta wrote:
> > NXP hardware IP(s) for secure-enclaves like Edgelock Enclave(ELE), are
> > embedded in the SoC to support the features like HSM, SHE & V2X, using
> > message based communication interface.
> >
> > The secure enclave FW communicates on a dedicated messaging unit(MU)
> > based interface(s) with application core, where kernel is running.
> > It exists on specific i.MX processors. e.g. i.MX8ULP, i.MX93.
> >
> > This patch adds the driver for communication interface to
> > secure-enclave, for exchanging messages with NXP secure enclave HW
> > IP(s) like EdgeLock Enclave (ELE) from Kernel-space, used by kernel
> > management layers like
> > - DM-Crypt.
> >
> > Signed-off-by: Pankaj Gupta <pankaj.gupta@....com>
> > ---
> > drivers/firmware/imx/Kconfig | 12 +
> > drivers/firmware/imx/Makefile | 2 +
> > drivers/firmware/imx/ele_base_msg.c | 286 +++++++++++++++++++
> > drivers/firmware/imx/ele_base_msg.h | 92 +++++++
> > drivers/firmware/imx/ele_common.c | 239 ++++++++++++++++
> > drivers/firmware/imx/ele_common.h | 43 +++
> > drivers/firmware/imx/se_ctrl.c | 531
> ++++++++++++++++++++++++++++++++++++
> > drivers/firmware/imx/se_ctrl.h | 99 +++++++
> > include/linux/firmware/imx/se_api.h | 14 +
> > 9 files changed, 1318 insertions(+)
> >
> > diff --git a/drivers/firmware/imx/Kconfig
> > b/drivers/firmware/imx/Kconfig index 183613f82a11..56bdca9bd917
> 100644
> > --- a/drivers/firmware/imx/Kconfig
> > +++ b/drivers/firmware/imx/Kconfig
> > @@ -22,3 +22,15 @@ config IMX_SCU
> >
> > This driver manages the IPC interface between host CPU and the
> > SCU firmware running on M4.
> > +
> > +config IMX_SEC_ENCLAVE
> > + tristate "i.MX Embedded Secure Enclave - EdgeLock Enclave Firmware
> driver."
> > + depends on IMX_MBOX && ARCH_MXC && ARM64
> > + default m if ARCH_MXC
> > +
> > + help
> > + It is possible to use APIs exposed by the iMX Secure Enclave HW IP
> called:
> > + - EdgeLock Enclave Firmware (for i.MX8ULP, i.MX93),
> > + like base, HSM, V2X & SHE using the SAB protocol via the shared
> Messaging
> > + Unit. This driver exposes these interfaces via a set of file
> descriptors
> > + allowing to configure shared memory, send and receive messages.
> > diff --git a/drivers/firmware/imx/Makefile
> > b/drivers/firmware/imx/Makefile index 8f9f04a513a8..aa9033e0e9e3
> > 100644
> > --- a/drivers/firmware/imx/Makefile
> > +++ b/drivers/firmware/imx/Makefile
> > @@ -1,3 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0
> > obj-$(CONFIG_IMX_DSP) += imx-dsp.o
> > obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o
> imx-scu-soc.o
> > +sec_enclave-objs = se_ctrl.o ele_common.o ele_base_msg.o
> > +obj-${CONFIG_IMX_SEC_ENCLAVE} += sec_enclave.o
> > diff --git a/drivers/firmware/imx/ele_base_msg.c
> > b/drivers/firmware/imx/ele_base_msg.c
> > new file mode 100644
> > index 000000000000..f072c613dba1
> > --- /dev/null
> > +++ b/drivers/firmware/imx/ele_base_msg.c
> > @@ -0,0 +1,286 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +#include <linux/types.h>
> > +#include <linux/completion.h>
> > +#include <linux/dma-mapping.h>
> > +
> > +#include "ele_base_msg.h"
> > +#include "ele_common.h"
> > +
> > +int ele_get_info(struct device *dev, struct ele_dev_info *s_info) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
> > + phys_addr_t get_info_addr = 0;
> > + u32 *get_info_data = NULL;
> > + u32 status;
> > + int ret = 0;
> > +
> > + memset(s_info, 0x0, sizeof(*s_info));
> > +
> > + if (priv->mem_pool_name)
> > + get_info_data = get_phy_buf_mem_pool(dev,
> > + priv->mem_pool_name,
> > + &get_info_addr,
> > + ELE_GET_INFO_BUFF_SZ);
> > + else
> > + get_info_data = dma_alloc_coherent(dev,
> > + ELE_GET_INFO_BUFF_SZ,
> > + &get_info_addr,
> > + GFP_KERNEL);
> > + if (!get_info_data) {
> > + ret = -ENOMEM;
> > + dev_dbg(dev,
> > + "%s: Failed to allocate get_info_addr.\n",
> > + __func__);
> > + goto exit;
> > + }
> > +
> > + tx_msg = kzalloc(ELE_GET_INFO_REQ_MSG_SZ, GFP_KERNEL);
> > + if (!tx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + rx_msg = kzalloc(ELE_GET_INFO_RSP_MSG_SZ, GFP_KERNEL);
> > + if (!rx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + ret = plat_fill_cmd_msg_hdr(priv,
> > + (struct se_msg_hdr *)&tx_msg->header,
> > + ELE_GET_INFO_REQ,
> > + ELE_GET_INFO_REQ_MSG_SZ,
> > + true);
> > + if (ret)
> > + goto exit;
> > +
> > + tx_msg->data[0] = upper_32_bits(get_info_addr);
> > + tx_msg->data[1] = lower_32_bits(get_info_addr);
> > + tx_msg->data[2] = sizeof(struct ele_dev_info);
> > + ret = imx_ele_msg_send_rcv(priv, tx_msg, rx_msg);
> > + if (ret < 0)
> > + goto exit;
> > +
> > + ret = validate_rsp_hdr(priv,
> > + &priv->rx_msg->header,
> > + ELE_GET_INFO_REQ,
> > + ELE_GET_INFO_RSP_MSG_SZ,
> > + true);
> > + if (ret)
> > + goto exit;
> > +
> > + status = RES_STATUS(priv->rx_msg->data[0]);
> > + if (status != priv->success_tag) {
> > + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> > + ELE_GET_INFO_REQ, status);
> > + ret = -EPERM;
> > + }
> > +
> > + memcpy(s_info, get_info_data, sizeof(struct ele_dev_info));
> > +
> > +exit:
> > + if (get_info_addr) {
> > + if (priv->mem_pool_name)
> > + free_phybuf_mem_pool(dev, priv->mem_pool_name,
> > + get_info_data, ELE_GET_INFO_BUFF_SZ);
> > + else
> > + dma_free_coherent(dev,
> > + ELE_GET_INFO_BUFF_SZ,
> > + get_info_data,
> > + get_info_addr);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +int ele_fetch_soc_info(struct device *dev, u16 *soc_rev, u64
> > +*serial_num) {
> > + struct ele_dev_info s_info = {0};
> > + int err = 0;
> > +
> > + err = ele_get_info(dev, &s_info);
> > + if (err < 0) {
> > + dev_err(dev, "Error");
> > + return err;
> > + }
> > +
> > + *soc_rev = s_info.d_info.soc_rev;
> > + *serial_num = GET_SERIAL_NUM_FROM_UID(s_info.d_info.uid,
> > + MAX_UID_SIZE >> 2);
> > +
> > + return err;
> > +}
> > +
> > +int ele_ping(struct device *dev)
> > +{
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
> > + u32 status;
> > + int ret = 0;
> > +
> > + tx_msg = kzalloc(ELE_PING_REQ_SZ, GFP_KERNEL);
> > + if (!tx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + rx_msg = kzalloc(ELE_PING_RSP_SZ, GFP_KERNEL);
> > + if (!rx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + ret = plat_fill_cmd_msg_hdr(priv,
> > + (struct se_msg_hdr *)&tx_msg->header,
> > + ELE_PING_REQ, ELE_PING_REQ_SZ,
> > + true);
> > + if (ret) {
> > + dev_err(dev, "Error: plat_fill_cmd_msg_hdr failed.\n");
> > + goto exit;
> > + }
> > +
> > + ret = imx_ele_msg_send_rcv(priv, tx_msg, rx_msg);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = validate_rsp_hdr(priv,
> > + &priv->rx_msg->header,
> > + ELE_PING_REQ,
> > + ELE_PING_RSP_SZ,
> > + true);
> > + if (ret)
> > + goto exit;
> > +
> > + status = RES_STATUS(priv->rx_msg->data[0]);
> > + if (status != priv->success_tag) {
> > + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> > + ELE_PING_REQ, status);
> > + ret = -EPERM;
> > + }
> > +exit:
> > + return ret;
> > +}
> > +
> > +int ele_service_swap(struct device *dev,
> > + phys_addr_t addr,
> > + u32 addr_size, u16 flag) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
> > + u32 status;
> > + int ret = 0;
> > +
> > + tx_msg = kzalloc(ELE_SERVICE_SWAP_REQ_MSG_SZ, GFP_KERNEL);
> > + if (!tx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + rx_msg = kzalloc(ELE_SERVICE_SWAP_RSP_MSG_SZ, GFP_KERNEL);
> > + if (!rx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + ret = plat_fill_cmd_msg_hdr(priv,
> > + (struct se_msg_hdr *)&tx_msg->header,
> > + ELE_SERVICE_SWAP_REQ,
> > + ELE_SERVICE_SWAP_REQ_MSG_SZ,
> > + true);
> > + if (ret)
> > + goto exit;
> > +
> > + tx_msg->data[0] = flag;
> > + tx_msg->data[1] = addr_size;
> > + tx_msg->data[2] = ELE_NONE_VAL;
> > + tx_msg->data[3] = lower_32_bits(addr);
> > + tx_msg->data[4] = plat_add_msg_crc((uint32_t *)&tx_msg[0],
> > + ELE_SERVICE_SWAP_REQ_MSG_SZ);
> > + ret = imx_ele_msg_send_rcv(priv, tx_msg, rx_msg);
> > + if (ret < 0)
> > + goto exit;
> > +
> > + ret = validate_rsp_hdr(priv,
> > + &priv->rx_msg->header,
> > + ELE_SERVICE_SWAP_REQ,
> > + ELE_SERVICE_SWAP_RSP_MSG_SZ,
> > + true);
> > + if (ret)
> > + goto exit;
> > +
> > + status = RES_STATUS(priv->rx_msg->data[0]);
> > + if (status != priv->success_tag) {
> > + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> > + ELE_SERVICE_SWAP_REQ, status);
> > + ret = -EPERM;
> > + } else {
> > + if (flag == ELE_IMEM_EXPORT)
> > + ret = priv->rx_msg->data[1];
> > + else
> > + ret = 0;
> > + }
> > +exit:
> > +
> > + return ret;
> > +}
> > +
> > +int ele_fw_authenticate(struct device *dev, phys_addr_t addr) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
> > + u32 status;
> > + int ret = 0;
> > +
> > + tx_msg = kzalloc(ELE_FW_AUTH_REQ_SZ, GFP_KERNEL);
> > + if (!tx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + rx_msg = kzalloc(ELE_FW_AUTH_RSP_MSG_SZ, GFP_KERNEL);
> > + if (!rx_msg) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > + ret = plat_fill_cmd_msg_hdr(priv,
> > + (struct se_msg_hdr *)&tx_msg->header,
> > + ELE_FW_AUTH_REQ,
> > + ELE_FW_AUTH_REQ_SZ,
> > + true);
> > + if (ret)
> > + goto exit;
> > +
> > + tx_msg->data[0] = addr;
> > + tx_msg->data[1] = addr >> 32;
> > + tx_msg->data[2] = addr;
> > +
> > + ret = imx_ele_msg_send_rcv(priv, tx_msg, rx_msg);
> > + if (ret < 0)
> > + goto exit;
> > +
> > + ret = validate_rsp_hdr(priv,
> > + &priv->rx_msg->header,
> > + ELE_FW_AUTH_REQ,
> > + ELE_FW_AUTH_RSP_MSG_SZ,
> > + true);
> > + if (ret)
> > + goto exit;
> > +
> > + status = RES_STATUS(priv->rx_msg->data[0]);
> > + if (status != priv->success_tag) {
> > + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> > + ELE_FW_AUTH_REQ, status);
> > + ret = -EPERM;
> > + }
> > +exit:
> > +
> > + return ret;
> > +}
> > diff --git a/drivers/firmware/imx/ele_base_msg.h
> > b/drivers/firmware/imx/ele_base_msg.h
> > new file mode 100644
> > index 000000000000..f00414f9d86d
> > --- /dev/null
> > +++ b/drivers/firmware/imx/ele_base_msg.h
> > @@ -0,0 +1,92 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright 2024 NXP
> > + *
> > + * Header file for the EdgeLock Enclave Base API(s).
> > + */
> > +
> > +#ifndef ELE_BASE_MSG_H
> > +#define ELE_BASE_MSG_H
> > +
> > +#include <linux/device.h>
> > +#include <linux/types.h>
> > +
> > +#define WORD_SZ 4
Will remove this in v3.
>
> This define is unused
>
> > +#define ELE_NONE_VAL 0x0
> > +
> > +#define ELE_SUCCESS_IND 0xD6
>
> This define is unused, instead you have hardcoded 0xd6 constants in your
> code. Either use this define or drop it.
Will Replace 0xd6 with the above macro in v3.
>
> > +
> > +#define ELE_GET_INFO_REQ 0xDA
> > +#define ELE_GET_INFO_REQ_MSG_SZ 0x10
> > +#define ELE_GET_INFO_RSP_MSG_SZ 0x08
> > +
> > +#define ELE_GET_INFO_BUFF_SZ 0x100
> > +
> > +#define DEFAULT_IMX_SOC_VER 0xA000
> > +#define SOC_VER_MASK 0xFFFF0000
> > +#define SOC_ID_MASK 0x0000FFFF
> > +
> > +#define MAX_UID_SIZE (16)
> > +#define DEV_GETINFO_ROM_PATCH_SHA_SZ (32)
> > +#define DEV_GETINFO_FW_SHA_SZ (32)
> > +#define DEV_GETINFO_OEM_SRKH_SZ (64)
> > +#define DEV_GETINFO_MIN_VER_MASK 0xFF
> > +#define DEV_GETINFO_MAJ_VER_MASK 0xFF00
> > +
> > +struct dev_info {
> > + uint8_t cmd;
> > + uint8_t ver;
> > + uint16_t length;
> > + uint16_t soc_id;
> > + uint16_t soc_rev;
> > + uint16_t lmda_val;
> > + uint8_t ssm_state;
> > + uint8_t dev_atts_api_ver;
> > + uint8_t uid[MAX_UID_SIZE];
> > + uint8_t sha_rom_patch[DEV_GETINFO_ROM_PATCH_SHA_SZ];
> > + uint8_t sha_fw[DEV_GETINFO_FW_SHA_SZ]; };
> > +
> > +struct dev_addn_info {
> > + uint8_t oem_srkh[DEV_GETINFO_OEM_SRKH_SZ];
> > + uint8_t trng_state;
> > + uint8_t csal_state;
> > + uint8_t imem_state;
> > + uint8_t reserved2;
> > +};
> > +
> > +struct ele_dev_info {
> > + struct dev_info d_info;
> > + struct dev_addn_info d_addn_info; };
> > +
> > +#define GET_SERIAL_NUM_FROM_UID(x, uid_word_sz) \
> > + (((u64)(((u32 *)(x))[(uid_word_sz) - 1]) << 32) | ((u32
> > +*)(x))[0])
> > +
> > +#define ELE_PING_REQ 0x01
> > +#define ELE_PING_REQ_SZ 0x04
> > +#define ELE_PING_RSP_SZ 0x08
> > +
> > +#define ELE_SERVICE_SWAP_REQ 0xDF
> > +#define ELE_SERVICE_SWAP_REQ_MSG_SZ 0x18 #define
> > +ELE_SERVICE_SWAP_RSP_MSG_SZ 0x0C
> > +#define ELE_IMEM_SIZE 0x10000
> > +#define ELE_IMEM_STATE_OK 0xCA
> > +#define ELE_IMEM_STATE_BAD 0xFE
> > +#define ELE_IMEM_STATE_WORD 0x27
> > +#define ELE_IMEM_STATE_MASK 0x00ff0000
> > +#define ELE_IMEM_EXPORT 0x1
> > +#define ELE_IMEM_IMPORT 0x2
> > +
> > +#define ELE_FW_AUTH_REQ 0x02
> > +#define ELE_FW_AUTH_REQ_SZ 0x10
> > +#define ELE_FW_AUTH_RSP_MSG_SZ 0x08
> > +
> > +int ele_get_info(struct device *dev, struct ele_dev_info *s_info);
> > +int ele_fetch_soc_info(struct device *dev, u16 *soc_rev, u64
> > +*serial_num); int ele_ping(struct device *dev); int
> > +ele_service_swap(struct device *dev,
> > + phys_addr_t addr,
> > + u32 addr_size, u16 flag); int
> > +ele_fw_authenticate(struct device *dev, phys_addr_t addr); #endif
> > diff --git a/drivers/firmware/imx/ele_common.c
> > b/drivers/firmware/imx/ele_common.c
> > new file mode 100644
> > index 000000000000..c286c3d84d82
> > --- /dev/null
> > +++ b/drivers/firmware/imx/ele_common.c
> > @@ -0,0 +1,239 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +#include "ele_base_msg.h"
> > +#include "ele_common.h"
> > +
> > +u32 plat_add_msg_crc(u32 *msg, u32 msg_len)
>
> Please use a proper function name prefix.
>
Renamed to imx_se_add_msg_crc().
> > +{
> > + u32 nb_words = msg_len / (u32)sizeof(u32);
> > + u32 crc = 0;
> > + u32 i;
> > +
> > + for (i = 0; i < nb_words - 1; i++)
> > + crc ^= *(msg + i);
> > +
> > + return crc;
> > +}
> > +
> > +int imx_ele_msg_rcv(struct se_if_priv *priv) {
> > + u32 wait;
> > + int err = 0;
> > +
> > + lockdep_assert_held(&priv->se_if_cmd_lock);
> > +
> > + wait = msecs_to_jiffies(1000);
> > + if (!wait_for_completion_timeout(&priv->done, wait)) {
> > + dev_err(priv->dev,
> > + "Error: wait_for_completion timed out.\n");
> > + err = -ETIMEDOUT;
> > + }
> > +
> > + return err;
> > +}
> > +
> > +int imx_ele_msg_send(struct se_if_priv *priv, void *tx_msg) {
> > + struct se_msg_hdr *header;
> > + int err;
> > +
> > + header = (struct se_msg_hdr *) tx_msg;
> > +
> > + if (header->tag == priv->cmd_tag)
> > + lockdep_assert_held(&priv->se_if_cmd_lock);
> > +
> > + scoped_guard(mutex, &priv->se_if_lock);
> > +
> > + err = mbox_send_message(priv->tx_chan, tx_msg);
> > + if (err < 0) {
> > + dev_err(priv->dev, "Error: mbox_send_message failure.\n");
> > + return err;
> > + }
> > +
> > + return err;
> > +}
> > +
> > +/* API used for send/receive blocking call. */ int
> > +imx_ele_msg_send_rcv(struct se_if_priv *priv, void *tx_msg, void
> > +*rx_msg) {
> > + int err;
> > +
> > + scoped_guard(mutex, &priv->se_if_cmd_lock);
> > + if (priv->waiting_rsp_dev) {
> > + dev_warn(priv->dev,
> > + "There should be no misc dev-ctx, waiting for resp.\n");
> > + priv->waiting_rsp_dev = NULL;
> > + }
> > + priv->rx_msg = rx_msg;
> > + err = imx_ele_msg_send(priv, tx_msg);
> > + if (err < 0)
> > + goto exit;
> > +
> > + err = imx_ele_msg_rcv(priv);
> > +
> > +exit:
> > + return err;
> > +}
> > +
> > +/*
> > + * Callback called by mailbox FW, when data is received.
> > + */
> > +void se_if_rx_callback(struct mbox_client *mbox_cl, void *msg) {
> > + struct device *dev = mbox_cl->dev;
> > + struct se_if_priv *priv;
> > + struct se_msg_hdr *header;
> > +
> > + priv = dev_get_drvdata(dev);
> > +
> > + /* The function can be called with NULL msg */
> > + if (!msg) {
> > + dev_err(dev, "Message is invalid\n");
> > + return;
> > + }
> > +
> > + header = (struct se_msg_hdr *) msg;
> > +
> > + if (header->tag == priv->rsp_tag) {
> > + if (!priv->waiting_rsp_dev) {
> > + /*
> > + * Reading the EdgeLock Enclave response
> > + * to the command, sent by other
> > + * linux kernel services.
> > + */
> > + spin_lock(&priv->lock);
> > + memcpy(priv->rx_msg, msg, header->size << 2);
> > +
> > + complete(&priv->done);
> > + spin_unlock(&priv->lock);
> > + return;
> > + }
> > + } else {
> > + dev_err(dev, "Failed to select a device for message: %.8x\n",
> > + *((u32 *) header));
> > + return;
> > + }
> > +}
> > +
> > +int validate_rsp_hdr(struct se_if_priv *priv,
> > + struct se_msg_hdr *header,
> > + uint8_t msg_id,
> > + uint8_t sz,
> > + bool is_base_api)
> > +{
> > + int ret = -EINVAL;
> > +
> > + if (header->tag != priv->rsp_tag) {
> > + dev_err(priv->dev,
> > + "MSG[0x%x] Hdr: Resp tag mismatch. (0x%x != 0x%x)",
> > + msg_id, header->tag, priv->rsp_tag);
> > + return ret;
>
> Just return -EINVAL. Drop the variable 'ret' entirely from this function.
Accepted. Will correct in V3.
>
> > + }
> > +
> > + if (header->command != msg_id) {
> > + dev_err(priv->dev,
> > + "MSG Header: Cmd id mismatch. (0x%x != 0x%x)",
> > + header->command, msg_id);
> > + return ret;
> > + }
> > +
> > + if (header->size != (sz >> 2)) {
> > + dev_err(priv->dev,
> > + "MSG[0x%x] Hdr: Cmd size mismatch. (0x%x != 0x%x)",
> > + msg_id, header->size, (sz >> 2));
> > + return ret;
> > + }
> > +
> > + if (is_base_api && (header->ver != priv->base_api_ver)) {
> > + dev_err(priv->dev,
> > + "MSG[0x%x] Hdr: Base API Vers mismatch. (0x%x != 0x%x)",
> > + msg_id, header->ver, priv->base_api_ver);
> > + return ret;
> > + } else if (!is_base_api && header->ver != priv->fw_api_ver) {
> > + dev_err(priv->dev,
> > + "MSG[0x%x] Hdr: FW API Vers mismatch. (0x%x != 0x%x)",
> > + msg_id, header->ver, priv->fw_api_ver);
> > + return ret;
> > + }
> > +
> > + ret = 0;
> > +
> > + return ret;
> > +}
> > +
> > +int se_save_imem_state(struct device *dev)
>
> This function is used internally by the driver code. It should take a struct
> struct se_if_priv * directly here. Same applies for several other functions in
> this patch.
>
Will correct it for:
- se_save_imem_state
- se_restore_imem_state
- imx_fetch_se_soc_info
> > +{
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + /* EXPORT command will save encrypted IMEM to given address,
> > + * so later in resume, IMEM can be restored from the given
> > + * address.
> > + *
> > + * Size must be at least 64 kB.
> > + */
> > + ret = ele_service_swap(dev,
> > + priv->imem.phyaddr,
> > + ELE_IMEM_SIZE,
> > + ELE_IMEM_EXPORT);
> > + if (ret < 0)
> > + dev_err(dev, "Failed to export IMEM\n");
> > + else
> > + dev_info(dev,
> > + "Exported %d bytes of encrypted IMEM\n",
> > + ret);
> > +
> > + return ret;
> > +}
> > +
> > +int se_restore_imem_state(struct device *dev) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + struct ele_dev_info s_info;
> > + int ret;
> > +
> > + /* get info from ELE */
> > + ret = ele_get_info(dev, &s_info);
> > + if (ret) {
> > + dev_err(dev, "Failed to get info from ELE.\n");
> > + return ret;
> > + }
> > +
> > + /* Get IMEM state, if 0xFE then import IMEM */
> > + if (s_info.d_addn_info.imem_state == ELE_IMEM_STATE_BAD) {
> > + /* IMPORT command will restore IMEM from the given
> > + * address, here size is the actual size returned by ELE
> > + * during the export operation
> > + */
> > + ret = ele_service_swap(dev,
> > + priv->imem.phyaddr,
> > + priv->imem.size,
> > + ELE_IMEM_IMPORT);
> > + if (ret) {
> > + dev_err(dev, "Failed to import IMEM\n");
> > + goto exit;
> > + }
> > + } else
> > + goto exit;
> > +
> > + /* After importing IMEM, check if IMEM state is equal to 0xCA
> > + * to ensure IMEM is fully loaded and
> > + * ELE functionality can be used.
> > + */
> > + ret = ele_get_info(dev, &s_info);
> > + if (ret) {
> > + dev_err(dev, "Failed to get info from ELE.\n");
> > + goto exit;
> > + }
> > +
> > + if (s_info.d_addn_info.imem_state == ELE_IMEM_STATE_OK)
> > + dev_info(dev, "Successfully restored IMEM\n");
> > + else
> > + dev_err(dev, "Failed to restore IMEM\n");
> > +
> > +exit:
> > + return ret;
> > +}
> > diff --git a/drivers/firmware/imx/ele_common.h
> > b/drivers/firmware/imx/ele_common.h
> > new file mode 100644
> > index 000000000000..76777ac629d6
> > --- /dev/null
> > +++ b/drivers/firmware/imx/ele_common.h
> > @@ -0,0 +1,43 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +
> > +#ifndef __ELE_COMMON_H__
> > +#define __ELE_COMMON_H__
> > +
> > +#include "se_ctrl.h"
> > +
> > +#define IMX_ELE_FW_DIR "imx/ele/"
> > +
> > +uint32_t plat_add_msg_crc(uint32_t *msg, uint32_t msg_len); int
> > +imx_ele_msg_rcv(struct se_if_priv *priv); int imx_ele_msg_send(struct
> > +se_if_priv *priv, void *tx_msg); int imx_ele_msg_send_rcv(struct
> > +se_if_priv *priv, void *tx_msg, void *rx_msg); void
> > +se_if_rx_callback(struct mbox_client *mbox_cl, void *msg); int
> > +validate_rsp_hdr(struct se_if_priv *priv,
> > + struct se_msg_hdr *header,
> > + uint8_t msg_id,
> > + uint8_t sz,
> > + bool is_base_api);
> > +
> > +/* Fill a command message header with a given command ID and length
> > +in bytes. */ static inline int plat_fill_cmd_msg_hdr(struct se_if_priv *priv,
> > + struct se_msg_hdr *hdr,
> > + u8 cmd,
> > + u32 len,
> > + bool is_base_api) {
> > + hdr->tag = priv->cmd_tag;
> > + hdr->ver = (is_base_api) ? priv->base_api_ver : priv->fw_api_ver;
> > + hdr->command = cmd;
> > + hdr->size = len >> 2;
> > +
> > + return 0;
> > +}
> > +
> > +int se_save_imem_state(struct device *dev); int
> > +se_restore_imem_state(struct device *dev);
> > +
> > +#endif /*__ELE_COMMON_H__ */
> > diff --git a/drivers/firmware/imx/se_ctrl.c
> > b/drivers/firmware/imx/se_ctrl.c new file mode 100644 index
> > 000000000000..0642d349b3d3
> > --- /dev/null
> > +++ b/drivers/firmware/imx/se_ctrl.c
> > @@ -0,0 +1,531 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +#include <linux/completion.h>
> > +#include <linux/delay.h>
> > +#include <linux/dev_printk.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/errno.h>
> > +#include <linux/export.h>
> > +#include <linux/firmware.h>
> > +#include <linux/firmware/imx/se_api.h> #include <linux/genalloc.h>
> > +#include <linux/init.h> #include <linux/io.h> #include
> > +<linux/miscdevice.h> #include <linux/mod_devicetable.h> #include
> > +<linux/module.h> #include <linux/of_platform.h> #include
> > +<linux/of_reserved_mem.h> #include <linux/platform_device.h> #include
> > +<linux/slab.h> #include <linux/string.h> #include <linux/sys_soc.h>
> > +
> > +#include "ele_base_msg.h"
> > +#include "ele_common.h"
> > +#include "se_ctrl.h"
> > +
> > +#define RESERVED_DMA_POOL BIT(0)
> > +
> > +struct imx_se_node_info {
> > + u8 se_if_id;
> > + u8 se_if_did;
> > + u8 max_dev_ctx;
> > + u8 cmd_tag;
> > + u8 rsp_tag;
> > + u8 success_tag;
> > + u8 base_api_ver;
> > + u8 fw_api_ver;
> > + u8 *se_name;
> > + u8 *mbox_tx_name;
> > + u8 *mbox_rx_name;
> > + u8 *pool_name;
> > + u8 *fw_name_in_rfs;
> > + bool soc_register;
> > + bool reserved_dma_ranges;
> > + bool imem_mgmt;
> > + int (*se_fetch_soc_info)(struct device *dev, u16 *soc_rev, u64
> > +*serial_num); };
> > +
> > +struct imx_se_node_info_list {
> > + u8 num_mu;
> > + u16 soc_id;
> > + struct imx_se_node_info info[];
> > +};
> > +
> > +static const struct imx_se_node_info_list imx8ulp_info = {
> > + .num_mu = 1,
> > + .soc_id = SOC_ID_OF_IMX8ULP,
> > + .info = {
> > + {
> > + .se_if_id = 2,
> > + .se_if_did = 7,
> > + .max_dev_ctx = 4,
> > + .cmd_tag = 0x17,
> > + .rsp_tag = 0xe1,
> > + .success_tag = 0xd6,
> > + .base_api_ver = MESSAGING_VERSION_6,
> > + .fw_api_ver = MESSAGING_VERSION_7,
> > + .se_name = "hsm1",
> > + .mbox_tx_name = "tx",
> > + .mbox_rx_name = "rx",
> > + .pool_name = "sram",
> > + .fw_name_in_rfs = IMX_ELE_FW_DIR
> > + "mx8ulpa2ext-ahab-container.img",
> > + .soc_register = true,
> > + .reserved_dma_ranges = true,
> > + .imem_mgmt = true,
> > + .se_fetch_soc_info = ele_fetch_soc_info,
> > + },
>
> Indentation level is one too deep here.
Accepted and will correct in v3.
>
> > + },
> > +};
> > +
> > +static const struct imx_se_node_info_list imx93_info = {
> > + .num_mu = 1,
> > + .soc_id = SOC_ID_OF_IMX93,
> > + .info = {
> > + {
> > + .se_if_id = 2,
> > + .se_if_did = 3,
> > + .max_dev_ctx = 4,
> > + .cmd_tag = 0x17,
> > + .rsp_tag = 0xe1,
> > + .success_tag = 0xd6,
> > + .base_api_ver = MESSAGING_VERSION_6,
> > + .fw_api_ver = MESSAGING_VERSION_7,
> > + .se_name = "hsm1",
> > + .mbox_tx_name = "tx",
> > + .mbox_rx_name = "rx",
> > + .reserved_dma_ranges = true,
> > + .imem_mgmt = true,
> > + .soc_register = true,
> > + },
>
> Drop all fields from this struct that are common to all currently supported
> SoCs. You can always re-add them later when actually needed.
> This will make your code easier to review.
This will be double effort of first removing and then adding them latter when the patches for SoC i.MX93, i.MX95, will come.
Patches for I.MX93, 95 are ready with me. Once, these patches get accepted. I will be posting those patches.
Request you to accept this as is, till then.
Thanks.
>
> > + },
> > +};
> > +
> > +static const struct of_device_id se_match[] = {
> > + { .compatible = "fsl,imx8ulp-ele", .data = (void *)&imx8ulp_info},
> > + { .compatible = "fsl,imx93-ele", .data = (void *)&imx93_info},
> > + {},
> > +};
> > +
> > +static struct imx_se_node_info
> > + *get_imx_se_node_info(struct imx_se_node_info_list *info_list,
> > + const u32 idx) {
> > + if (idx > info_list->num_mu)
> > + return NULL;
> > +
> > + return &info_list->info[idx];
> > +}
> > +
> > +void *get_phy_buf_mem_pool(struct device *dev,
> > + u8 *mem_pool_name,
> > + dma_addr_t *buf,
> > + u32 size)
> > +{
> > + struct device_node *of_node = dev->of_node;
> > + struct gen_pool *mem_pool;
> > +
> > + mem_pool = of_gen_pool_get(of_node, mem_pool_name, 0);
> > + if (!mem_pool) {
> > + dev_err(dev,
> > + "Unable to get sram pool = %s\n",
> > + mem_pool_name);
> > + return 0;
> > + }
> > +
> > + return gen_pool_dma_alloc(mem_pool, size, buf); }
> > +
> > +void free_phybuf_mem_pool(struct device *dev,
> > + u8 *mem_pool_name,
> > + u32 *buf,
> > + u32 size)
> > +{
> > + struct device_node *of_node = dev->of_node;
> > + struct gen_pool *mem_pool;
> > +
> > + mem_pool = of_gen_pool_get(of_node, mem_pool_name, 0);
> > + if (!mem_pool)
> > + dev_err(dev,
> > + "%s: Failed: Unable to get sram pool.\n",
> > + __func__);
> > +
> > + gen_pool_free(mem_pool, (u64)buf, size); }
> > +
> > +static int imx_fetch_se_soc_info(struct device *dev) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + struct imx_se_node_info_list *info_list;
> > + const struct imx_se_node_info *info;
> > + struct soc_device_attribute *attr;
> > + struct soc_device *sdev;
> > + u64 serial_num;
> > + u16 soc_rev;
> > + int err = 0;
> > +
> > + info = priv->info;
> > + info_list = (struct imx_se_node_info_list *)
> > + device_get_match_data(dev);
> > +
> > + /* This function should be called once.
> > + * Check if the soc_rev is zero to continue.
> > + */
> > + if (priv->soc_rev)
> > + return err;
> > +
> > + err = info->se_fetch_soc_info(dev, &soc_rev, &serial_num);
> > + if (err < 0) {
> > + dev_err(dev, "Failed to fetch SoC Info.");
> > + return err;
> > + }
> > +
> > + priv->soc_rev = soc_rev;
> > + if (!info->soc_register)
> > + return 0;
> > +
> > + attr = devm_kzalloc(dev, sizeof(*attr), GFP_KERNEL);
> > + if (!attr)
> > + return -ENOMEM;
> > +
> > + if (FIELD_GET(DEV_GETINFO_MIN_VER_MASK, soc_rev))
> > + attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%x.%x",
> > + FIELD_GET(DEV_GETINFO_MIN_VER_MASK,
> > + soc_rev),
> > + FIELD_GET(DEV_GETINFO_MAJ_VER_MASK,
> > + soc_rev));
> > + else
> > + attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%x",
> > + FIELD_GET(DEV_GETINFO_MAJ_VER_MASK,
> > + soc_rev));
> > +
> > + switch (info_list->soc_id) {
> > + case SOC_ID_OF_IMX8ULP:
> > + attr->soc_id = devm_kasprintf(dev, GFP_KERNEL,
> > + "i.MX8ULP");
> > + break;
> > + case SOC_ID_OF_IMX93:
> > + attr->soc_id = devm_kasprintf(dev, GFP_KERNEL,
> > + "i.MX93");
> > + break;
> > + }
> > +
> > + err = of_property_read_string(of_root, "model",
> > + &attr->machine);
> > + if (err)
> > + return -EINVAL;
> > +
> > + attr->family = devm_kasprintf(dev, GFP_KERNEL, "Freescale
> > + i.MX");
> > +
> > + attr->serial_number
> > + = devm_kasprintf(dev, GFP_KERNEL, "%016llX",
> > + serial_num);
> > +
> > + sdev = soc_device_register(attr);
> > + if (IS_ERR(sdev))
> > + return PTR_ERR(sdev);
> > +
> > + return 0;
> > +}
> > +
> > +/* interface for managed res to free a mailbox channel */ static void
> > +if_mbox_free_channel(void *mbox_chan) {
> > + mbox_free_channel(mbox_chan);
> > +}
> > +
> > +static int se_if_request_channel(struct device *dev,
> > + struct mbox_chan **chan,
> > + struct mbox_client *cl,
> > + const char *name) {
> > + struct mbox_chan *t_chan;
> > + int ret = 0;
> > +
> > + t_chan = mbox_request_channel_byname(cl, name);
> > + if (IS_ERR(t_chan)) {
> > + ret = PTR_ERR(t_chan);
> > + return dev_err_probe(dev, ret,
> > + "Failed to request %s channel.", name);
> > + }
> > +
> > + ret = devm_add_action(dev, if_mbox_free_channel, t_chan);
> > + if (ret) {
> > + dev_err(dev, "failed to add devm removal of mbox %s\n", name);
> > + goto exit;
> > + }
> > +
> > + *chan = t_chan;
> > +
> > +exit:
> > + return ret;
> > +}
> > +
> > +static int se_probe_if_cleanup(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct se_if_priv *priv;
> > + int ret = 0;
> > +
> > + priv = dev_get_drvdata(dev);
> > + if (!priv) {
> > + ret = 0;
> > + dev_dbg(dev, "SE-MU Priv data is NULL;");
> > + return ret;
> > + }
>
> This can't happen. Drop the check and let this function return void.
Accepted and will correct in v3.
>
> > +
> > + if (priv->tx_chan)
> > + mbox_free_channel(priv->tx_chan);
> > + if (priv->rx_chan)
> > + mbox_free_channel(priv->rx_chan);
> > +
> > + /* free the buffer in se remove, previously allocated
> > + * in se probe to store encrypted IMEM
> > + */
> > + if (priv->imem.buf) {
> > + dmam_free_coherent(dev,
> > + ELE_IMEM_SIZE,
> > + priv->imem.buf,
> > + priv->imem.phyaddr);
> > + priv->imem.buf = NULL;
> > + }
> > +
> > + if (priv->flags & RESERVED_DMA_POOL) {
> > + of_reserved_mem_device_release(dev);
> > + priv->flags &= (~RESERVED_DMA_POOL);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static void se_load_firmware(const struct firmware *fw, void
> > +*context) {
> > + struct se_if_priv *priv = (struct se_if_priv *) context;
> > + const struct imx_se_node_info *info = priv->info;
> > + const u8 *se_fw_name = info->fw_name_in_rfs;
> > + phys_addr_t se_fw_phyaddr;
> > + u8 *se_fw_buf;
> > +
> > + if (!fw) {
> > + if (priv->fw_fail > MAX_FW_LOAD_RETRIES)
> > + dev_dbg(priv->dev,
> > + "External FW not found, using ROM FW.\n");
> > + else {
> > + /*add a bit delay to wait for firmware priv released */
> > + msleep(20);
> > +
> > + /* Load firmware one more time if timeout */
> > + request_firmware_nowait(THIS_MODULE,
> > + FW_ACTION_UEVENT, info->fw_name_in_rfs,
> > + priv->dev, GFP_KERNEL, priv,
> > + se_load_firmware);
> > + priv->fw_fail++;
> > + dev_dbg(priv->dev, "Value of retries = 0x%x.\n",
> > + priv->fw_fail);
> > + }
>
> What's the point of retrying this? It won't succeed when it failed once, no?
> Besides, calling request_firmware_nowait() in the completion callback of
> that very same function looks strange.
There is a secondary firmware image part of rootfs. It will fail till the rootfs is not mounted.
Hence again calling the request_firmware_nowait, in the call back.
It will pass, once rootfs is mounted.
>
> > +
> > + return;
> > + }
> > +
> > + /* allocate buffer to store the SE FW */
> > + se_fw_buf = dmam_alloc_coherent(priv->dev, fw->size,
> > + &se_fw_phyaddr,
> > + GFP_KERNEL);
>
> Use unmanaged dma_alloc_coherent().
Accepted and will correct in v3.
>
>
> > + if (!se_fw_buf) {
> > + dev_err(priv->dev, "Failed to alloc SE fw buffer memory\n");
> > + goto exit;
>
> No need to free it when you weren't able to allocate it.
Accepted. Will correct it in v3,.
>
> > + }
> > +
> > + memcpy(se_fw_buf, fw->data, fw->size);
> > +
> > + if (ele_fw_authenticate(priv->dev, se_fw_phyaddr))
> > + dev_err(priv->dev,
> > + "Failed to authenticate & load SE firmware %s.\n",
> > + se_fw_name);
> > +
> > +exit:
> > + dmam_free_coherent(priv->dev,
> > + fw->size,
> > + se_fw_buf,
> > + se_fw_phyaddr);
> > +
> > + release_firmware(fw);
> > +}
> > +
> > +static int se_if_probe(struct platform_device *pdev) {
> > + struct imx_se_node_info_list *info_list;
> > + struct device *dev = &pdev->dev;
> > + struct imx_se_node_info *info;
> > + struct se_if_priv *priv;
> > + u32 idx;
> > + int ret;
> > +
> > + if (of_property_read_u32(dev->of_node, "reg", &idx)) {
> > + ret = -EINVAL;
> > + goto exit;
> > + }
> > +
> > + info_list = (struct imx_se_node_info_list *)
> > + device_get_match_data(dev);
> > + info = get_imx_se_node_info(info_list, idx);
>
> get_imx_se_node_info() can return NULL. You should catch this here.
Accepted and will correct it in v3.
>
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + dev_set_drvdata(dev, priv);
> > +
> > + /* Mailbox client configuration */
> > + priv->se_mb_cl.dev = dev;
> > + priv->se_mb_cl.tx_block = false;
> > + priv->se_mb_cl.knows_txdone = true;
> > + priv->se_mb_cl.rx_callback = se_if_rx_callback;
> > +
> > + ret = se_if_request_channel(dev, &priv->tx_chan,
> > + &priv->se_mb_cl, info->mbox_tx_name);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = se_if_request_channel(dev, &priv->rx_chan,
> > + &priv->se_mb_cl, info->mbox_rx_name);
> > + if (ret)
> > + goto exit;
> > +
> > + priv->dev = dev;
> > + priv->info = info;
> > +
> > + /* Initialize the mutex. */
>
> This comment doesn't provide any useful information.
Removed.
>
> > + mutex_init(&priv->se_if_lock);
> > + mutex_init(&priv->se_if_cmd_lock);
> > +
> > + priv->cmd_receiver_dev = NULL;
> > + priv->waiting_rsp_dev = NULL;
> > + priv->max_dev_ctx = info->max_dev_ctx;
> > + priv->cmd_tag = info->cmd_tag;
> > + priv->rsp_tag = info->rsp_tag;
> > + priv->mem_pool_name = info->pool_name;
> > + priv->success_tag = info->success_tag;
> > + priv->base_api_ver = info->base_api_ver;
> > + priv->fw_api_ver = info->fw_api_ver;
> > +
> > + init_completion(&priv->done);
> > + spin_lock_init(&priv->lock);
> > +
> > + if (info->reserved_dma_ranges) {
> > + ret = of_reserved_mem_device_init(dev);
> > + if (ret) {
> > + dev_err(dev,
> > + "failed to init reserved memory region %d\n",
> > + ret);
> > + priv->flags &= (~RESERVED_DMA_POOL);
>
> priv->flags is still 0. You just allocated it.
Accepted. Will correct in V3.
>
> > + goto exit;
> > + }
> > + priv->flags |= RESERVED_DMA_POOL;
> > + }
> > +
> > + if (info->fw_name_in_rfs) {
> > + ret = request_firmware_nowait(THIS_MODULE,
> > + FW_ACTION_UEVENT,
> > + info->fw_name_in_rfs,
> > + dev, GFP_KERNEL, priv,
> > + se_load_firmware);
> > + if (ret)
> > + dev_warn(dev, "Failed to get firmware [%s].\n",
> > + info->fw_name_in_rfs);
> > + }
> > +
> > + ret = imx_fetch_se_soc_info(dev);
> > + if (ret) {
> > + dev_err(dev,
> > + "failed[%pe] to fetch SoC Info\n", ERR_PTR(ret));
> > + goto exit;
> > + }
> > +
> > + if (info->imem_mgmt) {
> > + /* allocate buffer where SE store encrypted IMEM */
> > + priv->imem.buf = dmam_alloc_coherent(dev, ELE_IMEM_SIZE,
> > + &priv->imem.phyaddr,
> > + GFP_KERNEL);
> > + if (!priv->imem.buf) {
> > + dev_err(dev,
> > + "dmam-alloc-failed: To store encr-IMEM.\n");
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > + }
> > +
> > + dev_info(dev, "i.MX secure-enclave: %s interface to firmware,
> configured.\n",
> > + info->se_name);
> > + return devm_of_platform_populate(dev);
>
> What is this good for?
Accepted. Will remove it in v3.
>
> > +
> > +exit:
> > + /* if execution control reaches here, if probe fails.
> > + * hence doing the cleanup
> > + */
> > + if (se_probe_if_cleanup(pdev))
> > + dev_err(dev,
> > + "Failed to clean-up the child node probe.\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int se_remove(struct platform_device *pdev) {
> > + if (se_probe_if_cleanup(pdev))
> > + dev_err(&pdev->dev,
> > + "i.MX Secure Enclave is not cleanly
> > +un-probed.");
> > +
> > + return 0;
> > +}
> > +
> > +static int se_suspend(struct device *dev) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + const struct imx_se_node_info *info
> > + = priv->info;
> > +
> > + if (info && info->imem_mgmt)
> > + priv->imem.size = se_save_imem_state(dev);
>
> imem.size has type u32. se_save_imem_state() might return an error code.
Accepted. Will fix this in V3.
> You use imem.size as third argument to ele_service_swap(). This looks fishy.
There a flag associated with the ele_service_swap(), which suggests the kind of operation: EXPORT or IMPORT.
imem.size is used in case of IMPORT only.
This is correctly implemented.
>
> > +
> > + return 0;
> > +}
> > +
> > +static int se_resume(struct device *dev) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev);
> > + const struct imx_se_node_info *info
> > + = priv->info;
> > +
> > + if (info && info->imem_mgmt)
> > + se_restore_imem_state(dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops se_pm = {
> > + RUNTIME_PM_OPS(se_suspend, se_resume, NULL) };
> > +
> > +static struct platform_driver se_driver = {
> > + .driver = {
> > + .name = "fsl-se-fw",
> > + .of_match_table = se_match,
> > + .pm = &se_pm,
> > + },
> > + .probe = se_if_probe,
> > + .remove = se_remove,
> > +};
> > +MODULE_DEVICE_TABLE(of, se_match);
> > +
> > +module_platform_driver(se_driver);
> > +
> > +MODULE_AUTHOR("Pankaj Gupta <pankaj.gupta@....com>");
> > +MODULE_DESCRIPTION("iMX Secure Enclave Driver.");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/firmware/imx/se_ctrl.h
> > b/drivers/firmware/imx/se_ctrl.h new file mode 100644 index
> > 000000000000..7d4f439a6158
> > --- /dev/null
> > +++ b/drivers/firmware/imx/se_ctrl.h
> > @@ -0,0 +1,99 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +#ifndef SE_MU_H
> > +#define SE_MU_H
> > +
> > +#include <linux/miscdevice.h>
> > +#include <linux/semaphore.h>
> > +#include <linux/mailbox_client.h>
> > +
> > +#define MAX_FW_LOAD_RETRIES 50
> > +
> > +#define RES_STATUS(x) FIELD_GET(0x000000ff, x)
> > +#define MESSAGING_VERSION_6 0x6
> > +#define MESSAGING_VERSION_7 0x7
> > +
> > +struct se_imem_buf {
> > + u8 *buf;
> > + phys_addr_t phyaddr;
> > + u32 size;
> > +};
> > +
> > +/* Header of the messages exchange with the EdgeLock Enclave */
> > +struct se_msg_hdr {
> > + u8 ver;
> > + u8 size;
> > + u8 command;
> > + u8 tag;
> > +} __packed;
> > +
> > +#define SE_MU_HDR_SZ 4
> > +
> > +struct se_api_msg {
> > + struct se_msg_hdr header;
> > + u32 data[];
> > +};
> > +
> > +struct se_if_priv {
> > + struct se_if_device_ctx *cmd_receiver_dev;
> > + /* Update to the waiting_rsp_dev, to be protected
> > + * under se_if_lock.
> > + */
> > + struct se_if_device_ctx *waiting_rsp_dev;
> > + /*
> > + * prevent parallel access to the se interface registers
> > + * e.g. a user trying to send a command while the other one is
> > + * sending a response.
> > + */
> > + struct mutex se_if_lock;
> > + /*
> > + * prevent a command to be sent on the se interface while another
> one is
> > + * still processing. (response to a command is allowed)
> > + */
> > + struct mutex se_if_cmd_lock;
> > + struct device *dev;
> > + u8 *mem_pool_name;
> > + u8 cmd_tag;
> > + u8 rsp_tag;
> > + u8 success_tag;
> > + u8 base_api_ver;
> > + u8 fw_api_ver;
> > + u32 fw_fail;
> > + u16 soc_rev;
> > + const void *info;
> > +
> > + struct mbox_client se_mb_cl;
> > + struct mbox_chan *tx_chan, *rx_chan;
> > +
> > + /* Assignment of the rx_msg buffer to held till the
> > + * received content as part callback function, is copied.
> > + */
> > + struct se_api_msg *rx_msg;
> > + struct completion done;
> > + spinlock_t lock;
> > + /*
> > + * Flag to retain the state of initialization done at
> > + * the time of se-if probe.
> > + */
> > + uint32_t flags;
> > + u8 max_dev_ctx;
> > + struct se_if_device_ctx **ctxs;
> > + struct se_imem_buf imem;
> > +};
> > +
> > +void *get_phy_buf_mem_pool(struct device *dev,
> > + u8 *mem_pool_name,
> > + dma_addr_t *buf,
> > + u32 size);
> > +phys_addr_t get_phy_buf_mem_pool1(struct device *dev,
> > + u8 *mem_pool_name,
> > + u32 **buf,
> > + u32 size);
>
> This function is never defined.
Accepted and will be removed in v3.
>
> > +void free_phybuf_mem_pool(struct device *dev,
> > + u8 *mem_pool_name,
> > + u32 *buf,
> > + u32 size);
> > +#endif
> > diff --git a/include/linux/firmware/imx/se_api.h
> > b/include/linux/firmware/imx/se_api.h
> > new file mode 100644
> > index 000000000000..c47f84906837
> > --- /dev/null
> > +++ b/include/linux/firmware/imx/se_api.h
> > @@ -0,0 +1,14 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +#ifndef __SE_API_H__
> > +#define __SE_API_H__
> > +
> > +#include <linux/types.h>
> > +
> > +#define SOC_ID_OF_IMX8ULP 0x084D
> > +#define SOC_ID_OF_IMX93 0x9300
> > +
> > +#endif /* __SE_API_H__ */
> >
> > --
> > 2.34.1
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 |
> http://www.p/
> engutronix.de%2F&data=05%7C02%7Cpankaj.gupta%40nxp.com%7C5e4780
> ad2664458113a208dc7bd0e533%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C638521384332012351%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi
> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%
> 7C%7C%7C&sdata=tlQs2x2iDEeXKgyuB%2Bk5vI0rWh%2BbZQENACup6IhmhH
> I%3D&reserved=0 |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists