Date: Fri, 14 Jun 2024 10:02:19 +0100
From: Lee Jones <lee@...nel.org>
To: Thomas Weißschuh <linux@...ssschuh.net>
Cc: Pavel Machek <pavel@....cz>,
	Thomas Weißschuh <thomas@...ssschuh.net>,
	Benson Leung <bleung@...omium.org>,
	Guenter Roeck <groeck@...omium.org>,
	Tzung-Bi Shih <tzungbi@...nel.org>, linux-leds@...r.kernel.org,
	linux-kernel@...r.kernel.org, chrome-platform@...ts.linux.dev,
	Dustin Howett <dustin@...ett.net>,
	Mario Limonciello <mario.limonciello@....com>
Subject: Re: [PATCH v3 4/5] leds: Add ChromeOS EC driver

On Thu, 13 Jun 2024, Thomas Weißschuh wrote:

> The ChromeOS Embedded Controller exposes an LED control command.
> Expose its functionality through the leds subsystem.
> 
> The LEDs are exposed as multicolor devices.
> A hardware trigger, which is active by default, is provided to let the
> EC itself take over control over the LED.
> 
> The driver is designed to be probed via the cros_ec mfd device.
> 
> Signed-off-by: Thomas Weißschuh <linux@...ssschuh.net>
> ---
>  MAINTAINERS                 |   5 +
>  drivers/leds/Kconfig        |  15 +++
>  drivers/leds/Makefile       |   1 +
>  drivers/leds/leds-cros_ec.c | 299 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 320 insertions(+)

Mostly fine.  Couple of points.

> diff --git a/MAINTAINERS b/MAINTAINERS
> index aacccb376c28..8bc3491a08af 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5135,6 +5135,11 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
>  F:	sound/soc/codecs/cros_ec_codec.*
>  
> +CHROMEOS EC LED DRIVER
> +M:	Thomas Weißschuh <thomas@...ssschuh.net>
> +S:	Maintained
> +F:	drivers/leds/leds-cros_ec.c
> +
>  CHROMEOS EC SUBDRIVERS
>  M:	Benson Leung <bleung@...omium.org>
>  R:	Guenter Roeck <groeck@...omium.org>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 05e6af88b88c..aa2fec9a34ed 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -179,6 +179,21 @@ config LEDS_CR0014114
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called leds-cr0014114.
>  
> +config LEDS_CROS_EC
> +	tristate "LED Support for ChromeOS EC"
> +	depends on MFD_CROS_EC_DEV
> +	depends on LEDS_CLASS_MULTICOLOR
> +	select LEDS_TRIGGERS
> +	default MFD_CROS_EC_DEV
> +	help
> +	  This option enables support for LEDs managed by ChromeOS ECs.
> +	  All LEDs exposed by the EC are supported in multicolor mode.
> +	  A hardware trigger to switch back to the automatic behaviour is
> +	  provided.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called leds-cros_ec.
> +
>  config LEDS_EL15203000
>  	tristate "LED Support for Crane EL15203000"
>  	depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index effdfc6f1e95..3491904e13f7 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
>  obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
>  obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
>  obj-$(CONFIG_LEDS_CPCAP)		+= leds-cpcap.o
> +obj-$(CONFIG_LEDS_CROS_EC)		+= leds-cros_ec.o
>  obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
>  obj-$(CONFIG_LEDS_DA9052)		+= leds-da9052.o
>  obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
> diff --git a/drivers/leds/leds-cros_ec.c b/drivers/leds/leds-cros_ec.c
> new file mode 100644
> index 000000000000..7bb21a587713
> --- /dev/null
> +++ b/drivers/leds/leds-cros_ec.c
> @@ -0,0 +1,299 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + *  ChromeOS EC LED Driver
> + *
> + *  Copyright (C) 2024 Thomas Weißschuh <linux@...ssschuh.net>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/leds.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> +
> +#define DRV_NAME	"cros-ec-led"

Please refrain from defining device names.  Use the string in-place.

> +static const char * const cros_ec_led_functions[] = {
> +	[EC_LED_ID_BATTERY_LED]            = LED_FUNCTION_CHARGING,
> +	[EC_LED_ID_POWER_LED]              = LED_FUNCTION_POWER,
> +	[EC_LED_ID_ADAPTER_LED]            = "adapter",
> +	[EC_LED_ID_LEFT_LED]               = "left",
> +	[EC_LED_ID_RIGHT_LED]              = "right",
> +	[EC_LED_ID_RECOVERY_HW_REINIT_LED] = "recovery-hw-reinit",
> +	[EC_LED_ID_SYSRQ_DEBUG_LED]        = "sysrq-debug",
> +};
> +
> +static_assert(ARRAY_SIZE(cros_ec_led_functions) == EC_LED_ID_COUNT);

What does this do?  Result in a build failure?

> +static const int cros_ec_led_to_linux_id[] = {
> +	[EC_LED_COLOR_RED]    = LED_COLOR_ID_RED,
> +	[EC_LED_COLOR_GREEN]  = LED_COLOR_ID_GREEN,
> +	[EC_LED_COLOR_BLUE]   = LED_COLOR_ID_BLUE,
> +	[EC_LED_COLOR_YELLOW] = LED_COLOR_ID_YELLOW,
> +	[EC_LED_COLOR_WHITE]  = LED_COLOR_ID_WHITE,
> +	[EC_LED_COLOR_AMBER]  = LED_COLOR_ID_AMBER,
> +};
> +
> +static_assert(ARRAY_SIZE(cros_ec_led_to_linux_id) == EC_LED_COLOR_COUNT);
> +
> +static const int cros_ec_linux_to_ec_id[] = {
> +	[LED_COLOR_ID_RED]    = EC_LED_COLOR_RED,
> +	[LED_COLOR_ID_GREEN]  = EC_LED_COLOR_GREEN,
> +	[LED_COLOR_ID_BLUE]   = EC_LED_COLOR_BLUE,
> +	[LED_COLOR_ID_YELLOW] = EC_LED_COLOR_YELLOW,
> +	[LED_COLOR_ID_WHITE]  = EC_LED_COLOR_WHITE,
> +	[LED_COLOR_ID_AMBER]  = EC_LED_COLOR_AMBER,
> +};
> +
> +struct cros_ec_led_priv {
> +	struct led_classdev_mc led_mc_cdev;
> +	struct cros_ec_device *cros_ec;
> +	enum ec_led_id led_id;
> +};
> +
> +static inline struct cros_ec_led_priv *cros_ec_led_cdev_to_priv(struct led_classdev *led_cdev)
> +{
> +	return container_of(lcdev_to_mccdev(led_cdev), struct cros_ec_led_priv, led_mc_cdev);
> +}
> +
> +union cros_ec_led_cmd_data {
> +	struct ec_params_led_control req;
> +	struct ec_response_led_control resp;
> +} __packed;
> +
> +static int cros_ec_led_send_cmd(struct cros_ec_device *cros_ec,
> +				union cros_ec_led_cmd_data *arg)
> +{
> +	int ret;
> +	struct {
> +		struct cros_ec_command msg;
> +		union cros_ec_led_cmd_data data;
> +	} __packed buf = {
> +		.msg = {
> +			.version = 1,
> +			.command = EC_CMD_LED_CONTROL,
> +			.insize  = sizeof(arg->resp),
> +			.outsize = sizeof(arg->req),
> +		},
> +		.data.req = arg->req
> +	};
> +
> +	ret = cros_ec_cmd_xfer_status(cros_ec, &buf.msg);
> +	if (ret < 0)
> +		return ret;
> +
> +	arg->resp = buf.data.resp;
> +
> +	return 0;
> +}
> +
> +static int cros_ec_led_trigger_activate(struct led_classdev *led_cdev)
> +{
> +	struct cros_ec_led_priv *priv = cros_ec_led_cdev_to_priv(led_cdev);
> +	union cros_ec_led_cmd_data arg = {};
> +
> +	arg.req.led_id = priv->led_id;
> +	arg.req.flags = EC_LED_FLAGS_AUTO;
> +
> +	return cros_ec_led_send_cmd(priv->cros_ec, &arg);
> +}
> +
> +static struct led_hw_trigger_type cros_ec_led_trigger_type;
> +
> +static struct led_trigger cros_ec_led_trigger = {
> +	.name = "chromeos-auto",
> +	.trigger_type = &cros_ec_led_trigger_type,
> +	.activate = cros_ec_led_trigger_activate,
> +};
> +
> +static int cros_ec_led_brightness_set_blocking(struct led_classdev *led_cdev,
> +					       enum led_brightness brightness)
> +{
> +	struct cros_ec_led_priv *priv = cros_ec_led_cdev_to_priv(led_cdev);
> +	union cros_ec_led_cmd_data arg = {};
> +	enum ec_led_colors led_color;
> +	struct mc_subled *subled;
> +	size_t i;
> +
> +	led_mc_calc_color_components(&priv->led_mc_cdev, brightness);
> +
> +	arg.req.led_id = priv->led_id;
> +
> +	for (i = 0; i < priv->led_mc_cdev.num_colors; i++) {
> +		subled = &priv->led_mc_cdev.subled_info[i];
> +		led_color = cros_ec_linux_to_ec_id[subled->color_index];
> +		arg.req.brightness[led_color] = subled->brightness;
> +	}
> +
> +	return cros_ec_led_send_cmd(priv->cros_ec, &arg);
> +}
> +
> +static int cros_ec_led_count_subleds(struct device *dev,
> +				     struct ec_response_led_control *resp,
> +				     unsigned int *max_brightness)
> +{
> +	unsigned int range, common_range = 0;
> +	int num_subleds = 0;
> +	size_t i;
> +
> +	for (i = 0; i < EC_LED_COLOR_COUNT; i++) {
> +		range = resp->brightness_range[i];
> +
> +		if (!range)
> +			continue;
> +
> +		num_subleds++;
> +
> +		if (!common_range)
> +			common_range = range;
> +
> +		if (common_range != range) {
> +			/* The multicolor LED API expects a uniform max_brightness */
> +			dev_warn(dev, "Inconsistent LED brightness values\n");

You shouldn't print a warning then return an error.

Please upgrade to dev_err().

> +			return -EINVAL;
> +		}
> +	}
> +
> +	if (!num_subleds)
> +		return -EINVAL;
> +
> +	*max_brightness = common_range;
> +	return num_subleds;
> +}
> +
> +static const char *cros_ec_led_get_color_name(struct led_classdev_mc *led_mc_cdev)
> +{
> +	int color;
> +
> +	if (led_mc_cdev->num_colors == 1)
> +		color = led_mc_cdev->subled_info[0].color_index;
> +	else
> +		color = LED_COLOR_ID_MULTI;
> +
> +	return led_get_color_name(color);
> +}
> +
> +static int cros_ec_led_probe_led(struct device *dev, struct cros_ec_device *cros_ec,

Odd naming choice.

How about cros_ec_led_probe_one() or cros_ec_led_init()?

> +				 enum ec_led_id id)
> +{
> +	union cros_ec_led_cmd_data arg = {};
> +	struct cros_ec_led_priv *priv;
> +	struct led_classdev *led_cdev;
> +	struct mc_subled *subleds;
> +	int ret, num_subleds;
> +	size_t i, subled;

Why size_t for the iterator?

> +	arg.req.led_id = id;
> +	arg.req.flags = EC_LED_FLAGS_QUERY;
> +	ret = cros_ec_led_send_cmd(cros_ec, &arg);
> +	/* Unknown LED, skip */

Place the comment inside the if() or next to the return.


> +	if (ret == -EINVAL)
> +		return 0;
> +	if (ret == -EOPNOTSUPP)
> +		return -ENODEV;
> +	if (ret < 0)
> +		return ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	num_subleds = cros_ec_led_count_subleds(dev, &arg.resp,
> +						&priv->led_mc_cdev.led_cdev.max_brightness);
> +	if (num_subleds < 0)
> +		return num_subleds;
> +
> +	priv->cros_ec = cros_ec;
> +	priv->led_id = id;
> +
> +	subleds = devm_kcalloc(dev, num_subleds, sizeof(*subleds), GFP_KERNEL);
> +	if (!subleds)
> +		return -ENOMEM;
> +
> +	subled = 0;
> +	for (i = 0; i < EC_LED_COLOR_COUNT; i++) {
> +		if (!arg.resp.brightness_range[i])
> +			continue;
> +
> +		subleds[subled].color_index = cros_ec_led_to_linux_id[i];
> +		if (subled == 0)
> +			subleds[subled].intensity = 100;
> +		subled++;
> +	}
> +
> +	priv->led_mc_cdev.subled_info = subleds;
> +	priv->led_mc_cdev.num_colors = num_subleds;
> +
> +	led_cdev = &priv->led_mc_cdev.led_cdev;
> +	led_cdev->brightness_set_blocking = cros_ec_led_brightness_set_blocking;
> +	led_cdev->trigger_type = &cros_ec_led_trigger_type;
> +	led_cdev->default_trigger = cros_ec_led_trigger.name;
> +	led_cdev->hw_control_trigger = cros_ec_led_trigger.name;
> +
> +	led_cdev->name = devm_kasprintf(dev, GFP_KERNEL, "chromeos:%s:%s",
> +					cros_ec_led_get_color_name(&priv->led_mc_cdev),
> +					cros_ec_led_functions[id]);
> +	if (!led_cdev->name)
> +		return -ENOMEM;
> +
> +	return devm_led_classdev_multicolor_register(dev, &priv->led_mc_cdev);
> +}
> +
> +static int cros_ec_led_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
> +	struct cros_ec_device *cros_ec = ec_dev->ec_dev;
> +	int ret = 0;
> +	size_t i;
> +
> +	for (i = 0; i < EC_LED_ID_COUNT; i++) {
> +		ret = cros_ec_led_probe_led(dev, cros_ec, i);
> +		if (ret)
> +			break;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct platform_device_id cros_ec_led_id[] = {
> +	{ DRV_NAME, 0 },
> +	{}
> +};
> +
> +static struct platform_driver cros_ec_led_driver = {
> +	.driver.name	= DRV_NAME,
> +	.probe		= cros_ec_led_probe,
> +	.id_table	= cros_ec_led_id,
> +};
> +
> +static int __init cros_ec_led_init(void)
> +{
> +	int ret;
> +
> +	ret = led_trigger_register(&cros_ec_led_trigger);
> +	if (ret)
> +		return ret;

This has to be done before probe?

> +	ret = platform_driver_register(&cros_ec_led_driver);
> +	if (ret)
> +		led_trigger_unregister(&cros_ec_led_trigger);
> +
> +	return ret;
> +};
> +module_init(cros_ec_led_init);
> +
> +static void __exit cros_ec_led_exit(void)
> +{
> +	platform_driver_unregister(&cros_ec_led_driver);
> +	led_trigger_unregister(&cros_ec_led_trigger);
> +};
> +module_exit(cros_ec_led_exit);
> +
> +MODULE_DEVICE_TABLE(platform, cros_ec_led_id);
> +MODULE_DESCRIPTION("ChromeOS EC LED Driver");
> +MODULE_AUTHOR("Thomas Weißschuh <linux@...ssschuh.net");
> +MODULE_LICENSE("GPL");
> 
> -- 
> 2.45.2
> 

-- 
Lee Jones [李琼斯]

Powered by blists - more mailing lists