[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1c702815-3f55-4f62-a743-2463f3141650@mail.de>
Date: Sat, 15 Jun 2024 02:20:43 +0200
From: Sebastian Kropatsch <seb-dev@...l.de>
To: Tim Surber <me@...surber.de>, Heiko Stuebner <heiko@...ech.de>,
linux-rockchip@...ts.infradead.org
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Jonas Karlman <jonas@...boo.se>, Space Meyer <me@...-space.agency>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/2] arm64: dts: rockchip: Add FriendlyElec CM3588 NAS
board
Hi Tim,
Am 14.06.2024 um 04:00 schrieb Tim Surber:
> Hi Sebastian,
>
> I propose the addition of "pwm-beeper" and "gpio-ir-receiver" to the
> device tree, since they are permanently mounted on the baseboard.
Can you recommend a good way to test the IR receiver? I tried for
a while with evtest but could not see any output:
evtest /dev/input/event2
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "gpio_ir_recv"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 152 (KEY_SCREENLOCK)
Event type 2 (EV_REL)
Event code 0 (REL_X)
Event code 1 (REL_Y)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Key repeat handling:
Repeat type 20 (EV_REP)
Repeat code 0 (REP_DELAY)
Value 500
Repeat code 1 (REP_PERIOD)
Value 125
Properties:
Property type 5 (INPUT_PROP_POINTING_STICK)
Testing ... (interrupt to exit)
I only have one TV remote to test, so I'm not even sure that this
is compatible, I haven't touched anything IR-related before.
Cheers,
Sebastian
> On 10.06.2024 00:20, Sebastian Kropatsch wrote:
>> The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based on
>> the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
>> To reflect the hardware setup, add device tree sources for the SoM and
>> the NAS daughter board as separate files.
>>
>> Hardware features:
>> - Rockchip RK3588 SoC
>> - 4GB/8GB/16GB LPDDR4x RAM
>> - 64GB eMMC
>> - MicroSD card slot
>> - 1x RTL8125B 2.5G Ethernet
>> - 4x M.2 M-Key with PCIe 3.0 x1 (via bifurcation) for NVMe SSDs
>> - 2x USB 3.0 (USB 3.1 Gen1) Type-A, 1x USB 2.0 Type-A
>> - 1x USB 3.0 Type-C with DP AltMode support
>> - 2x HDMI 2.1 out, 1x HDMI in
>> - MIPI-CSI Connector, MIPI-DSI Connector
>> - 40-pin GPIO header
>> - 4 buttons: power, reset, recovery, MASK, user button
>> - 3.5mm Headphone out, 2.0mm PH-2A Mic in
>> - 5V Fan connector, PWM buzzer, IR receiver, RTC battery connector
>>
>> PCIe bifurcation is used to handle all four M.2 sockets at PCIe 3.0 x1
>> speed. Data lane mapping in the DT is done like described in commit
>> f8020dfb311d ("phy: rockchip-snps-pcie3: fix bifurcation on rk3588").
>>
>> This device tree includes support for eMMC, SD card, ethernet, all USB2
>> and USB3 ports, all four M.2 slots, GPU, RTC, buzzer, UART debugging as
>> well as the buttons and LEDs.
>> The GPIOs are labeled according to the schematics.
>>
>> Signed-off-by: Sebastian Kropatsch <seb-dev@...l.de>
>> ---
>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>> .../rk3588-friendlyelec-cm3588-nas.dts | 759 ++++++++++++++++++
>> .../rockchip/rk3588-friendlyelec-cm3588.dtsi | 655 +++++++++++++++
>> 3 files changed, 1415 insertions(+)
>> create mode 100644
>> arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
>> create mode 100644
>> arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
Powered by blists - more mailing lists