[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20240615142459.382ca77d@jic23-huawei>
Date: Sat, 15 Jun 2024 14:24:59 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Antoniu Miclaus <antoniu.miclaus@...log.com>
Cc: Lars-Peter Clausen <lars@...afoo.de>, Michael Hennerich
<Michael.Hennerich@...log.com>, "Rob Herring" <robh@...nel.org>, Krzysztof
Kozlowski <krzk+dt@...nel.org>, "Conor Dooley" <conor+dt@...nel.org>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 2/2] iio: frequency: adf4350: add clk provider
On Wed, 12 Jun 2024 16:02:29 +0300
Antoniu Miclaus <antoniu.miclaus@...log.com> wrote:
> Add clk provider feature for the adf4350.
>
> Even though the driver was sent as an IIO driver in most cases the
> device is actually seen as a clock provider.
>
> This patch aims to cover actual usecases requested by users in order to
> completely control the output frequencies from userspace.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
As Nuno reminded, this needs the clock maintainers in the loop
Trivial comments inline.
> +static int adf4350_clk_register(struct adf4350_state *st)
> +{
> + struct spi_device *spi = st->spi;
> + struct clk_init_data init;
> + struct clk *clk;
> + const char *parent_name;
> + int ret;
> +
> + if (!device_property_present(&spi->dev, "#clock-cells"))
> + return 0;
> +
> + init.name = devm_kasprintf(&spi->dev, GFP_KERNEL, "%s-clk",
> + fwnode_get_name(dev_fwnode(&spi->dev)));
Check for failure.
> + device_property_read_string(&spi->dev, "clock-output-names",
> + &init.name);
Also check for failure.
> +
> + parent_name = of_clk_get_parent_name(spi->dev.of_node, 0);
> + if (!parent_name)
> + return -EINVAL;
> +
> + init.ops = &adf4350_clk_ops;
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = CLK_SET_RATE_PARENT;
> +
> + st->hw.init = &init;
> + clk = devm_clk_register(&spi->dev, &st->hw);
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + ret = of_clk_add_provider(spi->dev.of_node, of_clk_src_simple_get, clk);
> + if (ret)
> + return ret;
> +
> + st->clkout = clk;
> +
> + return devm_add_action_or_reset(&spi->dev, adf4350_clk_del_provider, st);
> +}
> +
> static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
> {
> struct adf4350_platform_data *pdata;
> @@ -522,7 +646,6 @@ static int adf4350_probe(struct spi_device *spi)
>
> indio_dev->info = &adf4350_info;
> indio_dev->modes = INDIO_DIRECT_MODE;
> - indio_dev->channels = &adf4350_chan;
> indio_dev->num_channels = 1;
>
> mutex_init(&st->lock);
> @@ -551,6 +674,15 @@ static int adf4350_probe(struct spi_device *spi)
> return ret;
> }
>
> + ret = adf4350_clk_register(st);
> + if (ret)
> + return ret;
> +
> + if (st->clkout)
> + indio_dev->channels = &adf4350_clk_chan;
> + else
> + indio_dev->channels = &adf4350_chan;
> +
> ret = devm_add_action_or_reset(&spi->dev, adf4350_power_down, indio_dev);
> if (ret)
> return dev_err_probe(&spi->dev, ret,
Powered by blists - more mailing lists