Message-Id: <cover.1718388908.git.tjeznach@rivosinc.com>
Date: Fri, 14 Jun 2024 22:27:30 -0700
From: Tomasz Jeznach <tjeznach@...osinc.com>
To: Joerg Roedel <joro@...tes.org>,
	Will Deacon <will@...nel.org>,
	Robin Murphy <robin.murphy@....com>,
	Paul Walmsley <paul.walmsley@...ive.com>
Cc: Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	Anup Patel <apatel@...tanamicro.com>,
	Sunil V L <sunilvl@...tanamicro.com>,
	Nick Kossifidis <mick@....forth.gr>,
	Sebastien Boeuf <seb@...osinc.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	devicetree@...r.kernel.org,
	iommu@...ts.linux.dev,
	linux-riscv@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	linux@...osinc.com,
	Tomasz Jeznach <tjeznach@...osinc.com>
Subject: [PATCH v8 0/7] Linux RISC-V IOMMU Support

This patch series introduces support for RISC-V IOMMU architected
hardware into the Linux kernel.

The RISC-V IOMMU specification, which this series is based on, is
ratified and available at GitHub/riscv-non-isa [1].

At a high level, the RISC-V IOMMU specification defines:

1) Data structures:
  - Device-context: Associates devices with address spaces and holds
    per-device parameters for address translations.
  - Process-contexts: Associates different virtual address spaces based
    on device-provided process identification numbers.
  - MSI page table configuration used to direct an MSI to a guest
    interrupt file in an IMSIC.
2) In-memory queue interface:
  - Command-queue for issuing commands to the IOMMU.
  - Fault/event queue for reporting faults and events.
  - Page-request queue for reporting "Page Request" messages received
    from PCIe devices.
  - Message-signaled and wire-signaled interrupt mechanisms.
3) Memory-mapped programming interface:
  - Mandatory and optional register layout and description.
  - Software guidelines for device initialization and capabilities discovery.


This series introduces RISC-V IOMMU hardware initialization and complete
single-stage translation with paging domain support.

The patches are organized as follows:

Patch 1: Introduces minimal required device tree bindings for the driver.
Patch 2: Defines RISC-V IOMMU data structures, hardware programming interface
         registers layout, and minimal initialization code for enabling global
         pass-through for all connected masters.
Patch 3: Implements the device driver for PCIe implementation of RISC-V IOMMU
         architected hardware.
Patch 4: Introduces IOMMU interfaces to the kernel subsystem.
Patch 5: Implements device directory management with discovery sequences for
         I/O mapped or in-memory device directory table location, hardware
         capabilities discovery, and device to domain attach implementation.
Patch 6: Implements command and fault queue, and introduces directory cache
         invalidation sequences.
Patch 7: Implements paging domain, using highest page-table mode advertised
         by the hardware. This series enables only 4K mappings; complete support
         for large page mappings will be introduced in follow-up patch series.

Follow-up patch series, providing large page support and updated walk cache
management based on the revised specification, and complete ATS/PRI/SVA support,
will be posted to GitHub [2].

Changes from v7:
- rebase on v6.10-rc3
- fix address shift (ppn -> pfn) for queue base register read
- add invalidation after DDTE update

Best regards,
 Tomasz Jeznach

[1] link: https://github.com/riscv-non-isa/riscv-iommu
[2] link: https://github.com/tjeznach/linux
v7 link:  https://lore.kernel.org/linux-iommu/cover.1717612298.git.tjeznach@rivosinc.com/
v6 link:  https://lore.kernel.org/linux-iommu/cover.1716578450.git.tjeznach@rivosinc.com/
v5 link:  https://lore.kernel.org/linux-iommu/cover.1715708679.git.tjeznach@rivosinc.com/
v4 link:  https://lore.kernel.org/linux-iommu/cover.1714752293.git.tjeznach@rivosinc.com/
v3 link:  https://lore.kernel.org/linux-iommu/cover.1714494653.git.tjeznach@rivosinc.com/
v2 link:  https://lore.kernel.org/linux-iommu/cover.1713456597.git.tjeznach@rivosinc.com/
v1 link:  https://lore.kernel.org/linux-iommu/cover.1689792825.git.tjeznach@rivosinc.com/

Tomasz Jeznach (7):
  dt-bindings: iommu: riscv: Add bindings for RISC-V IOMMU
  iommu/riscv: Add RISC-V IOMMU platform device driver
  iommu/riscv: Add RISC-V IOMMU PCIe device driver
  iommu/riscv: Enable IOMMU registration and device probe.
  iommu/riscv: Device directory management.
  iommu/riscv: Command and fault queue support
  iommu/riscv: Paging domain support

 .../bindings/iommu/riscv,iommu.yaml           |  147 ++
 MAINTAINERS                                   |    8 +
 drivers/iommu/Kconfig                         |    1 +
 drivers/iommu/Makefile                        |    2 +-
 drivers/iommu/riscv/Kconfig                   |   20 +
 drivers/iommu/riscv/Makefile                  |    3 +
 drivers/iommu/riscv/iommu-bits.h              |  784 ++++++++
 drivers/iommu/riscv/iommu-pci.c               |  119 ++
 drivers/iommu/riscv/iommu-platform.c          |   92 +
 drivers/iommu/riscv/iommu.c                   | 1684 +++++++++++++++++
 drivers/iommu/riscv/iommu.h                   |   88 +
 11 files changed, 2947 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
 create mode 100644 drivers/iommu/riscv/Kconfig
 create mode 100644 drivers/iommu/riscv/Makefile
 create mode 100644 drivers/iommu/riscv/iommu-bits.h
 create mode 100644 drivers/iommu/riscv/iommu-pci.c
 create mode 100644 drivers/iommu/riscv/iommu-platform.c
 create mode 100644 drivers/iommu/riscv/iommu.c
 create mode 100644 drivers/iommu/riscv/iommu.h


base-commit: 83a7eefedc9b56fe7bfeff13b6c7356688ffa670
-- 
2.34.1

Powered by blists - more mailing lists