| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 16 Jun 2024 23:40:25 +0200
From: Jonas Karlman <jonas@...boo.se>
To: Detlev Casanova <detlev.casanova@...labora.com>
Cc: linux-kernel@...r.kernel.org, Mauro Carvalho Chehab
<mchehab@...nel.org>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Heiko Stuebner
<heiko@...ech.de>, "Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
Sebastian Reichel <sebastian.reichel@...labora.com>, Dragan Simic
<dsimic@...jaro.org>, Alexey Charkov <alchark@...il.com>, Cristian
Ciocaltea <cristian.ciocaltea@...labora.com>, Diederik de Haas
<didi.debian@...ow.org>, Andy Yan <andy.yan@...k-chips.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-staging@...ts.linux.dev
Subject: Re: [PATCH 1/3] media: rockchip: Introduce the rkvdec2 driver
Hi Detlev,
A few quick notes below, will do a more in depth review later.
On 2024-06-15 03:56, Detlev Casanova wrote:
> This driver supports the second generation of the Rockchip Video
> decoder, also known as vdpu34x.
> It is currently only used on the RK3588(s) SoC.
>
> There are 2 decoders on the RK3588 SoC that can work in pair to decode
> 8K video at 30 FPS but currently, only using one core at a time is
> supported.
>
> Scheduling requests between the two cores will be implemented later.
>
> The core supports H264, HEVC, VP9 and AVS2 decoding but this driver
> currently only supports H264.
>
> The driver is based on rkvdec and they may share some code in the
> future.
> The decision to make a different driver is mainly because rkvdec2 has
> more features and can work with multiple cores.
Please elaborate on the "more features" part, to my knowledge the main
difference is multiple cores and updated/extended regs.
Is more features refering to the linked list/table feature?, a feature
already present in the vdpu341 (rk3328) variant.
Hopefully both drivers can be combined and/or share common parts before
this leave staging.
>
> The registers are mapped in a struct in RAM using bitfields. It is IO
> copied to the HW when all values are configured.
> The decision to use such a struct instead of writing buffers one by one
> is based on the following reasons:
> - Rockchip cores are known to misbehave when registers are not written
> in address order,
> - Those cores also need the software to write all registers, even if
> they are written their default values or are not related to the task
> (this core will not start decoding some H264 frames if some VP9
> registers are not written to 0)
> - In the future, to support multiple cores, the scheduler could be
> optimized by storing the precomputed registers values and copy them
> to the HW as soos as a core becomes available.
>
> This makes the code more readable and may bring performance improvements
> in future features.
>
> Signed-off-by: Detlev Casanova <detlev.casanova@...labora.com>
> ---
> drivers/staging/media/Kconfig | 1 +
> drivers/staging/media/Makefile | 1 +
> drivers/staging/media/rkvdec2/Kconfig | 15 +
> drivers/staging/media/rkvdec2/Makefile | 3 +
> drivers/staging/media/rkvdec2/TODO | 13 +
> drivers/staging/media/rkvdec2/rkvdec2-h264.c | 899 ++++++++++++++
> drivers/staging/media/rkvdec2/rkvdec2-regs.h | 372 ++++++
> drivers/staging/media/rkvdec2/rkvdec2.c | 1160 ++++++++++++++++++
> drivers/staging/media/rkvdec2/rkvdec2.h | 123 ++
> 9 files changed, 2587 insertions(+)
> create mode 100644 drivers/staging/media/rkvdec2/Kconfig
> create mode 100644 drivers/staging/media/rkvdec2/Makefile
> create mode 100644 drivers/staging/media/rkvdec2/TODO
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2-h264.c
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2-regs.h
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2.c
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2.h
>
[snip]
> diff --git a/drivers/staging/media/rkvdec2/rkvdec2-regs.h b/drivers/staging/media/rkvdec2/rkvdec2-regs.h
> new file mode 100644
> index 000000000000..a214597cdcdc
> --- /dev/null
> +++ b/drivers/staging/media/rkvdec2/rkvdec2-regs.h
[snip]
> +
> +/* base: OFFSET_COMMON_REGS */
> +struct rkvdec2_regs_common {
> + struct rkvdec2_in_out {
> + u32 in_endian : 1;
> + u32 in_swap32_e : 1;
> + u32 in_swap64_e : 1;
> + u32 str_endian : 1;
> + u32 str_swap32_e : 1;
> + u32 str_swap64_e : 1;
> + u32 out_endian : 1;
> + u32 out_swap32_e : 1;
> + u32 out_cbcr_swap : 1;
> + u32 out_swap64_e : 1;
> + u32 reserved : 22;
> + } reg008;
> +
> + struct rkvdec2_dec_mode {
> + u32 dec_mode : 10;
> + u32 reserved : 22;
> + } reg009;
> +
> + struct rkvdec2_dec_e {
> + u32 dec_e : 1;
> + u32 reserved : 31;
> + } reg010;
> +
> + struct rkvdec2_important_en {
> + u32 reserved : 1;
> + u32 dec_clkgate_e : 1;
> + u32 dec_e_strmd_clkgate_dis : 1;
> + u32 reserved0 : 1;
> +
> + u32 dec_irq_dis : 1;
> + u32 dec_timeout_e : 1;
> + u32 buf_empty_en : 1;
> + u32 reserved1 : 3;
> +
> + u32 dec_e_rewrite_valid : 1;
> + u32 reserved2 : 9;
> + u32 softrst_en_p : 1;
> + u32 force_softreset_valid : 1;
> + u32 reserved3 : 2;
> + u32 pix_range_detection_e : 1;
> + u32 reserved4 : 7;
> + } reg011;
> +
> + struct rkvdec2_sencodary_en {
> + u32 wr_ddr_align_en : 1;
> + u32 colmv_compress_en : 1;
> + u32 fbc_e : 1;
> + u32 reserved0 : 1;
> +
> + u32 buspr_slot_disable : 1;
> + u32 error_info_en : 1;
> + u32 info_collect_en : 1;
> + u32 wait_reset_en : 1;
> +
> + u32 scanlist_addr_valid_en : 1;
> + u32 scale_down_en : 1;
> + u32 error_cfg_wr_disable : 1;
> + u32 reserved1 : 21;
> + } reg012;
> +
> + struct rkvdec2_en_mode_set {
> + u32 timeout_mode : 1;
> + u32 req_timeout_rst_sel : 1;
> + u32 reserved0 : 1;
> + u32 dec_commonirq_mode : 1;
> + u32 reserved1 : 2;
> + u32 stmerror_waitdecfifo_empty : 1;
> + u32 reserved2 : 2;
> + u32 h26x_streamd_error_mode : 1;
> + u32 reserved3 : 2;
> + u32 allow_not_wr_unref_bframe : 1;
> + u32 fbc_output_wr_disable : 1;
> + u32 reserved4 : 1;
> + u32 colmv_error_mode : 1;
> +
> + u32 reserved5 : 2;
> + u32 h26x_error_mode : 1;
> + u32 reserved6 : 2;
> + u32 ycacherd_prior : 1;
> + u32 reserved7 : 2;
> + u32 cur_pic_is_idr : 1;
> + u32 reserved8 : 1;
> + u32 right_auto_rst_disable : 1;
> + u32 frame_end_err_rst_flag : 1;
> + u32 rd_prior_mode : 1;
> + u32 rd_ctrl_prior_mode : 1;
> + u32 reserved9 : 1;
> + u32 filter_outbuf_mode : 1;
> + } reg013;
> +
> + struct rkvdec2_fbc_param_set {
> + u32 fbc_force_uncompress : 1;
> +
> + u32 reserved0 : 2;
> + u32 allow_16x8_cp_flag : 1;
> + u32 reserved1 : 2;
> +
> + u32 fbc_h264_exten_4or8_flag : 1;
> + u32 reserved2 : 25;
> + } reg014;
> +
> + struct rkvdec2_stream_param_set {
> + u32 rlc_mode_direct_write : 1;
> + u32 rlc_mode : 1;
> + u32 reserved0 : 3;
> +
> + u32 strm_start_bit : 7;
> + u32 reserved1 : 20;
> + } reg015;
> +
> + u32 reg016_str_len;
> +
> + struct rkvdec2_slice_number {
> + u32 slice_num : 25;
> + u32 reserved : 7;
> + } reg017;
> +
> + struct rkvdec2_y_hor_stride {
> + u32 y_hor_virstride : 16;
> + u32 reserved : 16;
> + } reg018;
> +
> + struct rkvdec2_uv_hor_stride {
> + u32 uv_hor_virstride : 16;
> + u32 reserved : 16;
> + } reg019;
> +
> + union {
> + struct rkvdec2_y_stride {
> + u32 y_virstride : 28;
> + u32 reserved : 4;
> + } reg020_y_virstride;
> +
> + struct rkvdec2_fbc_payload_offset {
> + u32 reserved : 4;
> + u32 payload_st_offset : 28;
> + } reg020_fbc_payload_off;
> + };
> +
> + struct rkvdec2_error_ctrl_set {
> + u32 inter_error_prc_mode : 1;
> + u32 error_intra_mode : 1;
> + u32 error_deb_en : 1;
> + u32 picidx_replace : 5;
> + u32 error_spread_e : 1;
> + u32 reserved0 : 3;
> + u32 error_inter_pred_cross_slice : 1;
> + u32 reserved1 : 11;
> + u32 roi_error_ctu_cal_en : 1;
> + u32 reserved2 : 7;
> + } reg021;
> +
> + struct rkvdec2_err_roi_ctu_offset_start {
> + u32 roi_x_ctu_offset_st : 12;
> + u32 reserved0 : 4;
> + u32 roi_y_ctu_offset_st : 12;
> + u32 reserved1 : 4;
> + } reg022;
> +
> + struct rkvdec2_err_roi_ctu_offset_end {
> + u32 roi_x_ctu_offset_end : 12;
> + u32 reserved0 : 4;
> + u32 roi_y_ctu_offset_end : 12;
> + u32 reserved1 : 4;
> + } reg023;
> +
> + struct rkvdec2_cabac_error_en_lowbits {
> + u32 cabac_err_en_lowbits : 32;
> + } reg024;
> +
> + struct rkvdec2_cabac_error_en_highbits {
> + u32 cabac_err_en_highbits : 30;
> + u32 reserved : 2;
> + } reg025;
> +
> + struct rkvdec2_block_gating_en {
> + u32 swreg_block_gating_e : 20;
> + u32 reserved : 11;
> + u32 reg_cfg_gating_en : 1;
> + } reg026;
> +
> + /* NOTE: reg027 ~ reg032 are added in vdpu38x at rk3588 */
> + struct SW027_CORE_SAFE_PIXELS {
> + // colmv and recon report coord x safe pixels
> + u32 core_safe_x_pixels : 16;
> + // colmv and recon report coord y safe pixels
> + u32 core_safe_y_pixels : 16;
> + } reg027;
> +
> + struct rkvdec2_multiply_core_ctrl {
> + u32 swreg_vp9_wr_prob_idx : 3;
> + u32 reserved0 : 1;
> + u32 swreg_vp9_rd_prob_idx : 3;
> + u32 reserved1 : 1;
> +
> + u32 swreg_ref_req_advance_flag : 1;
> + u32 sw_colmv_req_advance_flag : 1;
> + u32 sw_poc_only_highbit_flag : 1;
> + u32 sw_poc_arb_flag : 1;
> +
> + u32 reserved2 : 4;
> + u32 sw_film_idx : 10;
> + u32 reserved3 : 2;
> + u32 sw_pu_req_mismatch_dis : 1;
> + u32 sw_colmv_req_mismatch_dis : 1;
> + u32 reserved4 : 2;
> + } reg028;
> +
> + struct SW029_SCALE_DOWN_CTRL {
> + u32 scale_down_hor_ratio : 2;
> + u32 reserved0 : 6;
> + u32 scale_down_vrz_ratio : 2;
> + u32 reserved1 : 22;
> + } reg029;
> +
> + struct SW032_Y_SCALE_DOWN_TILE8x8_HOR_STRIDE {
> + u32 y_scale_down_hor_stride : 20;
> + u32 reserved0 : 12;
> + } reg030;
> +
> + struct SW031_UV_SCALE_DOWN_TILE8x8_HOR_STRIDE {
> + u32 uv_scale_down_hor_stride : 20;
> + u32 reserved0 : 12;
> + } reg031;
> +
> + u32 reg032_timeout_threshold;
> +} __packed;
> +
> +/* base: OFFSET_COMMON_ADDR_REGS */
> +struct rkvdec2_regs_common_addr {
> + u32 reg128_rlc_base;
> + u32 reg129_rlcwrite_base;
> + u32 reg130_decout_base;
> + u32 reg131_colmv_cur_base;
> + u32 reg132_error_ref_base;
> + u32 reg133_142_rcb_base[10];
> +} __packed;
> +
> +/* base: OFFSET_CODEC_PARAMS_REGS */
> +struct rkvdec2_regs_h264_params {
> + struct rkvdec2_h26x_set {
> + u32 h26x_frame_orslice : 1;
> + u32 h26x_rps_mode : 1;
> + u32 h26x_stream_mode : 1;
> + u32 h26x_stream_lastpacket : 1;
> + u32 h264_firstslice_flag : 1;
> + u32 reserved : 27;
> + } reg64;
Please be consistent in naming the regs, some have leading zero prefix
others do not. E.g. reg031 above and reg64 here.
> +
> + u32 cur_top_poc;
> + u32 cur_bot_poc;
> + u32 reg67_98_ref_poc[32];
> +
> + /* Regs 99 - 102 */
> + struct rkvdec2_h264_info {
> + struct rkvdec2_h264_ref_info {
> + u32 ref_field : 1;
> + u32 ref_topfield_used : 1;
> + u32 ref_botfield_used : 1;
> + u32 ref_colmv_use_flag : 1;
> + u32 ref_reserved : 4;
> + } __packed ref_info[4];
> + } __packed reg99_102_ref_info[4];
> +
> + u32 reserved_103_111[9];
> +
> + struct rkvdec2_error_ref_info {
> + u32 avs2_ref_error_field : 1;
> + u32 avs2_ref_error_topfield : 1;
> + u32 ref_error_topfield_used : 1;
> + u32 ref_error_botfield_used : 1;
> + u32 reserved : 28;
> + } reg112;
> +} __packed;
> +
[snip]
> diff --git a/drivers/staging/media/rkvdec2/rkvdec2.c b/drivers/staging/media/rkvdec2/rkvdec2.c
> new file mode 100644
> index 000000000000..db37fdbfc366
> --- /dev/null
> +++ b/drivers/staging/media/rkvdec2/rkvdec2.c
> @@ -0,0 +1,1160 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Rockchip Video Decoder 2 driver
> + *
> + * Copyright (C) 2024 Collabora, Ltd.
> + * Detlev Casanova <detlev.casanova@...labora.com>
> + *
> + * Based on rkvdec driver by Boris Brezillon <boris.brezillon@...labora.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <linux/videodev2.h>
> +#include <linux/workqueue.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-mem2mem.h>
> +#include <media/videobuf2-core.h>
> +#include <media/videobuf2-vmalloc.h>
> +
> +#include "rkvdec2.h"
> +
> +static int rkvdec2_try_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct rkvdec2_ctx *ctx = container_of(ctrl->handler, struct rkvdec2_ctx, ctrl_hdl);
> + const struct rkvdec2_coded_fmt_desc *desc = ctx->coded_fmt_desc;
> +
> + if (desc->ops->try_ctrl)
> + return desc->ops->try_ctrl(ctx, ctrl);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops rkvdec2_ctrl_ops = {
> + .try_ctrl = rkvdec2_try_ctrl,
> +};
> +
> +static const struct rkvdec2_ctrl_desc rkvdec2_h264_ctrl_descs[] = {
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_SPS,
> + .cfg.ops = &rkvdec2_ctrl_ops,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_PPS,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_SCALING_MATRIX,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_DECODE_MODE,
> + .cfg.min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + .cfg.max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + .cfg.def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_START_CODE,
> + .cfg.min = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> + .cfg.def = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> + .cfg.max = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> + },
> + {
> + .cfg.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
> + .cfg.min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
> + .cfg.max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10,
In an earlier comment there was mention that high 10 was not yet
implemented?
> + .cfg.menu_skip_mask =
> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
> + .cfg.def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
> + },
> + {
> + .cfg.id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
> + .cfg.min = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
> + .cfg.max = V4L2_MPEG_VIDEO_H264_LEVEL_6_0,
> + },
> +};
> +
[snip]
> +
> +static int rkvdec2_queue_init(void *priv,
> + struct vb2_queue *src_vq,
> + struct vb2_queue *dst_vq)
> +{
> + struct rkvdec2_ctx *ctx = priv;
> + struct rkvdec2_dev *rkvdec = ctx->dev;
> + int ret;
> +
> + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> + src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> + src_vq->drv_priv = ctx;
> + src_vq->ops = &rkvdec2_queue_ops;
> + src_vq->mem_ops = &vb2_dma_contig_memops;
> +
> + /*
> + * Driver does mostly sequential access, so sacrifice TLB efficiency
> + * for faster allocation. Also, no CPU access on the source queue,
> + * so no kernel mapping needed.
> + */
> + src_vq->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES |
Do we really need to use ALLOC_SINGLE_PAGES flag, e.g. use 4K pages?
Was probably only needed for 32-bit to work with the arm mmu instead
of the rk iommu present on all newer socs.
Also, allocating chunks of 4 MiB should help reduce resources
required for export/import of video buffers to display pipeline.
> + DMA_ATTR_NO_KERNEL_MAPPING;
> + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + src_vq->lock = &rkvdec->vdev_lock;
> + src_vq->dev = rkvdec->v4l2_dev.dev;
> + src_vq->supports_requests = true;
> + src_vq->requires_requests = true;
> +
> + ret = vb2_queue_init(src_vq);
> + if (ret)
> + return ret;
> +
> + dst_vq->bidirectional = true;
> + dst_vq->mem_ops = &vb2_dma_contig_memops;
> + dst_vq->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES |
Same here.
> + DMA_ATTR_NO_KERNEL_MAPPING;
> + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
> + dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> + dst_vq->drv_priv = ctx;
> + dst_vq->ops = &rkvdec2_queue_ops;
> + dst_vq->buf_struct_size = sizeof(struct rkvdec2_decoded_buffer);
> + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + dst_vq->lock = &rkvdec->vdev_lock;
> + dst_vq->dev = rkvdec->v4l2_dev.dev;
> +
> + return vb2_queue_init(dst_vq);
> +}
> +
> +static int rkvdec2_add_ctrls(struct rkvdec2_ctx *ctx,
> + const struct rkvdec2_ctrls *ctrls)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ctrls->num_ctrls; i++) {
> + const struct v4l2_ctrl_config *cfg = &ctrls->ctrls[i].cfg;
> +
> + v4l2_ctrl_new_custom(&ctx->ctrl_hdl, cfg, ctx);
> + if (ctx->ctrl_hdl.error)
> + return ctx->ctrl_hdl.error;
> + }
> +
> + return 0;
> +}
> +
[snip]
> +
> +static int rkvdec2_probe(struct platform_device *pdev)
> +{
> + struct rkvdec2_dev *rkvdec;
> + unsigned int i;
> + int ret, irq;
> +
> + rkvdec = devm_kzalloc(&pdev->dev, sizeof(*rkvdec), GFP_KERNEL);
> + if (!rkvdec)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, rkvdec);
> + rkvdec->dev = &pdev->dev;
> +
> + mutex_init(&rkvdec->vdev_lock);
> + INIT_DELAYED_WORK(&rkvdec->watchdog_work, rkvdec2_watchdog_func);
> +
> + rkvdec->clocks = devm_kcalloc(&pdev->dev, ARRAY_SIZE(rkvdec2_clk_names),
> + sizeof(*rkvdec->clocks), GFP_KERNEL);
> + if (!rkvdec->clocks)
> + return -ENOMEM;
> +
> + for (i = 0; i < ARRAY_SIZE(rkvdec2_clk_names); i++)
> + rkvdec->clocks[i].id = rkvdec2_clk_names[i];
> +
> + ret = devm_clk_bulk_get(&pdev->dev, ARRAY_SIZE(rkvdec2_clk_names),
> + rkvdec->clocks);
> + if (ret)
> + return ret;
> +
> + rkvdec->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(rkvdec->regs))
> + return PTR_ERR(rkvdec->regs);
> +
> + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
I am expecting that this should be albe to work with 40 bits together
with the iommu. I know too little about dma subsystem to know if this
mask refers to the iova or the physical memory that can be used.
With the iommu in use we should be able to use buffers in 40-bit
addressable physical memory.
> + if (ret) {
> + dev_err(&pdev->dev, "Could not set DMA coherent mask.\n");
> + return ret;
> + }
> +
> + vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq <= 0)
> + return -ENXIO;
> +
> + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> + rkvdec2_irq_handler, IRQF_ONESHOT,
> + dev_name(&pdev->dev), rkvdec);
> + if (ret) {
> + dev_err(&pdev->dev, "Could not request vdec2 IRQ\n");
> + return ret;
> + }
> +
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 100);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> + ret = clk_bulk_prepare_enable(ARRAY_SIZE(rkvdec2_clk_names), rkvdec->clocks);
> + if (ret) {
> + dev_err(&pdev->dev, "Could not start clocks\n");
> + return ret;
> + }
> +
> + ret = rkvdec2_v4l2_init(rkvdec);
> + if (ret)
> + goto err_disable_runtime_pm;
> +
> + return 0;
> +
> +err_disable_runtime_pm:
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> + return ret;
> +}
> +
[snip]
Powered by blists - more mailing lists