lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list] 
Message-Id: <20240617-imx95-dts-v3-v7-3-488b52e10862@nxp.com>
Date: Mon, 17 Jun 2024 10:56:37 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, 
 Sascha Hauer <s.hauer@...gutronix.de>, 
 Pengutronix Kernel Team <kernel@...gutronix.de>, 
 Fabio Estevam <festevam@...il.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org, 
 Alexander Stein <alexander.stein@...tq-group.com>, 
 Peng Fan <peng.fan@....com>
Subject: [PATCH v7 3/3] arm64: dts: freescale: add i.MX95 19x19 EVK minimal
 board dts

From: Peng Fan <peng.fan@....com>

Add a minimal dts for i.MX95 19x19 EVK board:
 - lpuart1 as console
 - sdhc1/2 as storage

Signed-off-by: Peng Fan <peng.fan@....com>
---
 arch/arm64/boot/dts/freescale/Makefile            |   1 +
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 200 ++++++++++++++++++++++
 2 files changed, 201 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 1b1e4db02071..c3fef4e4d8dd 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -239,6 +239,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
new file mode 100644
index 000000000000..675abb70aa18
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95.dtsi"
+
+/ {
+	model = "NXP i.MX95 19X19 board";
+	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	memory@...00000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VDD_SD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&lpuart1 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX      0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX      0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x13fe
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x13fe
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x13fe
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x13fe
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};

-- 
2.37.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ