| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 17 Jun 2024 09:49:53 -0400
From: Trevor Gamblin <tgamblin@...libre.com>
To: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Dmitry Rokosov <ddrokosov@...rdevices.ru>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Cosmin Tanislav <cosmin.tanislav@...log.com>, Chen-Yu Tsai <wens@...e.org>,
Hans de Goede <hdegoede@...hat.com>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>, Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Saravanan Sekar <sravanhome@...il.com>, Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Nuno Sá <nuno.sa@...log.com>,
Linus Walleij <linus.walleij@...aro.org>,
Jean-Baptiste Maneyrol <jmaneyrol@...ensense.com>,
Crt Mori <cmo@...exis.com>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
linux-amlogic@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
Uwe Kleine-König <u.kleine-koenig@...libre.com>,
Trevor Gamblin <tgamblin@...libre.com>
Subject: [PATCH v3 13/41] iio: adc: meson_saradc: make use of
regmap_clear_bits(), regmap_set_bits()
Instead of using regmap_update_bits() and passing the mask twice, use
regmap_set_bits().
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().
Suggested-by: Uwe Kleine-König <u.kleine-koenig@...libre.com>
Signed-off-by: Trevor Gamblin <tgamblin@...libre.com>
---
drivers/iio/adc/meson_saradc.c | 101 ++++++++++++++++++-----------------------
1 file changed, 44 insertions(+), 57 deletions(-)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 13b473d8c6c7..e16b0e28974e 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -546,35 +546,31 @@ static void meson_sar_adc_start_sample_engine(struct iio_dev *indio_dev)
reinit_completion(&priv->done);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
- MESON_SAR_ADC_REG0_FIFO_IRQ_EN,
- MESON_SAR_ADC_REG0_FIFO_IRQ_EN);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_REG0,
+ MESON_SAR_ADC_REG0_FIFO_IRQ_EN);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
- MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE,
- MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_REG0,
+ MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
- MESON_SAR_ADC_REG0_SAMPLING_START,
- MESON_SAR_ADC_REG0_SAMPLING_START);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_REG0,
+ MESON_SAR_ADC_REG0_SAMPLING_START);
}
static void meson_sar_adc_stop_sample_engine(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
- MESON_SAR_ADC_REG0_FIFO_IRQ_EN, 0);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_REG0,
+ MESON_SAR_ADC_REG0_FIFO_IRQ_EN);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
- MESON_SAR_ADC_REG0_SAMPLING_STOP,
- MESON_SAR_ADC_REG0_SAMPLING_STOP);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_REG0,
+ MESON_SAR_ADC_REG0_SAMPLING_STOP);
/* wait until all modules are stopped */
meson_sar_adc_wait_busy_clear(indio_dev);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
- MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE, 0);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_REG0,
+ MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE);
}
static int meson_sar_adc_lock(struct iio_dev *indio_dev)
@@ -586,9 +582,8 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
if (priv->param->has_bl30_integration) {
/* prevent BL30 from using the SAR ADC while we are using it */
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
- MESON_SAR_ADC_DELAY_KERNEL_BUSY,
- MESON_SAR_ADC_DELAY_KERNEL_BUSY);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_DELAY,
+ MESON_SAR_ADC_DELAY_KERNEL_BUSY);
udelay(1);
@@ -614,8 +609,8 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev)
if (priv->param->has_bl30_integration)
/* allow BL30 to use the SAR ADC again */
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
- MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_DELAY,
+ MESON_SAR_ADC_DELAY_KERNEL_BUSY);
mutex_unlock(&priv->lock);
}
@@ -869,17 +864,16 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
* disable this bit as seems to be only relevant for Meson6 (based
* on the vendor driver), which we don't support at the moment.
*/
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
- MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL, 0);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_REG0,
+ MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL);
/* disable all channels by default */
regmap_write(priv->regmap, MESON_SAR_ADC_CHAN_LIST, 0x0);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
- MESON_SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE, 0);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
- MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY,
- MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_REG3,
+ MESON_SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_REG3,
+ MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY);
/* delay between two samples = (10+1) * 1uS */
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
@@ -914,21 +908,17 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK,
regval);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW,
- MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW);
/*
* set up the input channel muxes in MESON_SAR_ADC_AUX_SW
@@ -944,12 +934,10 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
regmap_write(priv->regmap, MESON_SAR_ADC_AUX_SW, regval);
if (priv->temperature_sensor_calibrated) {
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
- MESON_SAR_ADC_DELTA_10_TS_REVE1,
- MESON_SAR_ADC_DELTA_10_TS_REVE1);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
- MESON_SAR_ADC_DELTA_10_TS_REVE0,
- MESON_SAR_ADC_DELTA_10_TS_REVE0);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+ MESON_SAR_ADC_DELTA_10_TS_REVE1);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+ MESON_SAR_ADC_DELTA_10_TS_REVE0);
/*
* set bits [3:0] of the TSC (temperature sensor coefficient)
@@ -976,10 +964,10 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
regval);
}
} else {
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
- MESON_SAR_ADC_DELTA_10_TS_REVE1, 0);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
- MESON_SAR_ADC_DELTA_10_TS_REVE0, 0);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+ MESON_SAR_ADC_DELTA_10_TS_REVE1);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+ MESON_SAR_ADC_DELTA_10_TS_REVE0);
}
regval = FIELD_PREP(MESON_SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN,
@@ -1062,9 +1050,8 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
meson_sar_adc_set_bandgap(indio_dev, true);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
- MESON_SAR_ADC_REG3_ADC_EN,
- MESON_SAR_ADC_REG3_ADC_EN);
+ regmap_set_bits(priv->regmap, MESON_SAR_ADC_REG3,
+ MESON_SAR_ADC_REG3_ADC_EN);
udelay(5);
@@ -1079,8 +1066,8 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
return 0;
err_adc_clk:
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
- MESON_SAR_ADC_REG3_ADC_EN, 0);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_REG3,
+ MESON_SAR_ADC_REG3_ADC_EN);
meson_sar_adc_set_bandgap(indio_dev, false);
regulator_disable(priv->vref);
err_vref:
@@ -1104,8 +1091,8 @@ static void meson_sar_adc_hw_disable(struct iio_dev *indio_dev)
clk_disable_unprepare(priv->adc_clk);
- regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
- MESON_SAR_ADC_REG3_ADC_EN, 0);
+ regmap_clear_bits(priv->regmap, MESON_SAR_ADC_REG3,
+ MESON_SAR_ADC_REG3_ADC_EN);
meson_sar_adc_set_bandgap(indio_dev, false);
--
2.45.2
Powered by blists - more mailing lists