linux-kernel - [PATCH v6 10/10] PCI: imx6: Add i.MX8Q PCIe root complex (RC) support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240617-pci2_upstream-v6-10-e0821238f997@nxp.com>
Date: Mon, 17 Jun 2024 16:16:46 -0400
From: Frank Li <Frank.Li@....com>
To: Richard Zhu <hongxing.zhu@....com>, 
 Lucas Stach <l.stach@...gutronix.de>, 
 Lorenzo Pieralisi <lpieralisi@...nel.org>, 
 Krzysztof Wilczyński <kw@...ux.com>, 
 Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>, 
 Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>, 
 Pengutronix Kernel Team <kernel@...gutronix.de>, 
 Fabio Estevam <festevam@...il.com>, NXP Linux Team <linux-imx@....com>, 
 Philipp Zabel <p.zabel@...gutronix.de>, Liam Girdwood <lgirdwood@...il.com>, 
 Mark Brown <broonie@...nel.org>, 
 Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-pci@...r.kernel.org, imx@...ts.linux.dev, 
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, 
 bpf@...r.kernel.org, devicetree@...r.kernel.org, 
 Frank Li <Frank.Li@....com>
Subject: [PATCH v6 10/10] PCI: imx6: Add i.MX8Q PCIe root complex (RC)
 support

From: Richard Zhu <hongxing.zhu@....com>

Implement i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe RC support. While
the controller resembles that of iMX8MP, the PHY differs significantly.
Notably, there's a distinction between PCI bus addresses and CPU addresses.

Introduce IMX_PCIE_FLAG_CPU_ADDR_FIXUP in drvdata::flags to indicate driver
need the cpu_addr_fixup() callback to facilitate CPU address to PCI bus
address conversion according to "range" property.

Signed-off-by: Richard Zhu <hongxing.zhu@....com>
Signed-off-by: Frank Li <Frank.Li@....com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 18c133f5a56fc..d2533d889d120 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -66,6 +66,7 @@ enum imx_pcie_variants {
 	IMX8MQ,
 	IMX8MM,
 	IMX8MP,
+	IMX8Q,
 	IMX95,
 	IMX8MQ_EP,
 	IMX8MM_EP,
@@ -81,6 +82,7 @@ enum imx_pcie_variants {
 #define IMX_PCIE_FLAG_HAS_PHY_RESET		BIT(5)
 #define IMX_PCIE_FLAG_HAS_SERDES		BIT(6)
 #define IMX_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
+#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP		BIT(8)
 
 #define imx_check_flag(pci, val)     (pci->drvdata->flags & val)
 
@@ -1012,6 +1014,22 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
 		regulator_disable(imx_pcie->vpcie);
 }
 
+static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
+{
+	struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
+	struct dw_pcie_rp *pp = &pcie->pp;
+	struct resource_entry *entry;
+	unsigned int offset;
+
+	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))
+		return cpu_addr;
+
+	entry = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
+	offset = entry->offset;
+
+	return (cpu_addr - offset);
+}
+
 static const struct dw_pcie_host_ops imx_pcie_host_ops = {
 	.init = imx_pcie_host_init,
 	.deinit = imx_pcie_host_exit,
@@ -1020,6 +1038,7 @@ static const struct dw_pcie_host_ops imx_pcie_host_ops = {
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.start_link = imx_pcie_start_link,
 	.stop_link = imx_pcie_stop_link,
+	.cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
 };
 
 static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
@@ -1449,6 +1468,13 @@ static int imx_pcie_probe(struct platform_device *pdev)
 		if (ret < 0)
 			return ret;
 
+		if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_CPU_ADDR_FIXUP)) {
+			if (!resource_list_first_type(&pci->pp.bridge->windows, IORESOURCE_MEM)) {
+				dw_pcie_host_deinit(&pci->pp);
+				return dev_err_probe(dev, -EINVAL, "DTS Miss PCI memory range");
+			}
+		}
+
 		if (pci_msi_enabled()) {
 			u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
 
@@ -1473,6 +1499,7 @@ static const char * const imx6q_clks[] = {"pcie_bus", "pcie", "pcie_phy"};
 static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"};
 static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"};
 static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"};
+static const char * const imx8q_clks[] = {"mstr", "slv", "dbi"};
 
 static const struct imx_pcie_drvdata drvdata[] = {
 	[IMX6Q] = {
@@ -1576,6 +1603,13 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
 		.set_ref_clk = imx8mm_pcie_set_ref_clk,
 	},
+	[IMX8Q] = {
+		.variant = IMX8Q,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV |
+			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP,
+		.clk_names = imx8q_clks,
+		.clks_cnt = ARRAY_SIZE(imx8q_clks),
+	},
 	[IMX95] = {
 		.variant = IMX95,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES,
@@ -1653,6 +1687,7 @@ static const struct of_device_id imx_pcie_of_match[] = {
 	{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
 	{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
 	{ .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
+	{ .compatible = "fsl,imx8q-pcie", .data = &drvdata[IMX8Q], },
 	{ .compatible = "fsl,imx95-pcie", .data = &drvdata[IMX95], },
 	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
 	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },

-- 
2.34.1