linux-kernel - [PATCH v2 5/5] mfd: tqmx86: add I2C IRQ support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b6cc921b24dbe8c2272528c23b683e1180a7234a.1718626665.git.matthias.schiffer@ew.tq-group.com>
Date: Mon, 17 Jun 2024 14:23:02 +0200
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: Lee Jones <lee@...nel.org>
Cc: linux-kernel@...r.kernel.org,
	Gregor Herburger <gregor.herburger@...group.com>,
	linux@...tq-group.com,
	Matthias Schiffer <matthias.schiffer@...tq-group.com>
Subject: [PATCH v2 5/5] mfd: tqmx86: add I2C IRQ support

From: Gregor Herburger <gregor.herburger@...group.com>

The i2c-ocores controller can run in interrupt mode on tqmx86 modules.
Add module parameter to allow configuring the IRQ number, similar to the
handling of the GPIO IRQ.

Signed-off-by: Gregor Herburger <gregor.herburger@...group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
---

v2: improve module parameter description (was patch 4/4)

 drivers/mfd/tqmx86.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index 7f9ccd83278dd..dcd5fa3e18c50 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -50,6 +50,7 @@
 #define TQMX86_REG_IO_EXT_INT_9			2
 #define TQMX86_REG_IO_EXT_INT_12		3
 #define TQMX86_REG_IO_EXT_INT_MASK		0x3
+#define TQMX86_REG_IO_EXT_INT_I2C_SHIFT		0
 #define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT	4
 #define TQMX86_REG_SAUC		0x17
 
@@ -60,7 +61,12 @@ static uint gpio_irq;
 module_param(gpio_irq, uint, 0);
 MODULE_PARM_DESC(gpio_irq, "GPIO IRQ number (valid parameters: 7, 9, 12)");
 
-static const struct resource tqmx_i2c_soft_resources[] = {
+static uint i2c_irq;
+module_param(i2c_irq, uint, 0);
+MODULE_PARM_DESC(i2c_irq, "I2C IRQ number (valid parameters: 7, 9, 12)");
+
+static struct resource tqmx_i2c_soft_resources[] = {
+	DEFINE_RES_IRQ(0),
 	DEFINE_RES_IO(TQMX86_IOBASE_I2C, TQMX86_IOSIZE_I2C),
 };
 
@@ -271,6 +277,18 @@ static int tqmx86_probe(struct platform_device *pdev)
 	ocores_platform_data.clock_khz = tqmx86_board_id_to_clk_rate(dev, board_id);
 
 	if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) {
+		if (i2c_irq) {
+			err = tqmx86_setup_irq(dev, "I2C", i2c_irq, io_base,
+					       TQMX86_REG_IO_EXT_INT_I2C_SHIFT);
+			if (err)
+				i2c_irq = 0;
+		}
+
+		if (i2c_irq)
+			tqmx_i2c_soft_resources[0].start = i2c_irq;
+		else
+			tqmx_i2c_soft_resources[0].flags = 0;
+
 		err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
 					   tqmx86_i2c_soft_dev,
 					   ARRAY_SIZE(tqmx86_i2c_soft_dev),
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/