[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240618173123.2592074-2-nm@ti.com>
Date: Tue, 18 Jun 2024 12:31:21 -0500
From: Nishanth Menon <nm@...com>
To: Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski
<krzk+dt@...nel.org>,
Rob Herring <robh@...nel.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tero Kristo <kristo@...nel.org>, Vignesh Raghavendra <vigneshr@...com>,
Nishanth Menon <nm@...com>, Vaishnav
Achath <vaishnav.a@...com>,
Jared McArthur <j-mcarthur@...com>, Bryan
Brattlof <bb@...com>,
Dhruva Gole <d-gole@...com>
Subject: [PATCH 1/3] arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode
Introduce a GPIO mux mode macro for easier readability. All K3 devices
use mux mode 7 to switch to GPIO mux.
Signed-off-by: Nishanth Menon <nm@...com>
---
arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index 4cd2df467d0b..b1a0415e6611 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -38,6 +38,8 @@
#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
+#define PIN_GPIO_MUX_MODE (7)
+
#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
--
2.43.0
Powered by blists - more mailing lists