linux-kernel - [PATCH v3 0/3] Add I2C support on TH1520

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240618-i2c-th1520-v3-0-3042590a16b1@bootlin.com>
Date: Tue, 18 Jun 2024 09:42:37 +0200
From: Thomas Bonnefille <thomas.bonnefille@...tlin.com>
To: Andi Shyti <andi.shyti@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Jisheng Zhang <jszhang@...nel.org>, 
 Guo Ren <guoren@...nel.org>, Fu Wei <wefu@...hat.com>, 
 Drew Fustini <dfustini@...storrent.com>, 
 Emil Renner Berthing <emil.renner.berthing@...onical.com>, 
 Conor Dooley <conor@...nel.org>, 
 Jarkko Nikula <jarkko.nikula@...ux.intel.com>
Cc: Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>, 
 Paul Walmsley <paul.walmsley@...ive.com>, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, 
 Miquèl Raynal <miquel.raynal@...tlin.com>, 
 linux-i2c@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org, 
 Thomas Bonnefille <thomas.bonnefille@...tlin.com>, 
 Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v3 0/3] Add I2C support on TH1520

This adds I2C support in the device tree of the T-Head TH1520 RISCV-SoC
and a default configuration for the BeagleV-Ahead. It appears that the
TH1520 I2C is already supported in the upstream kernel through the
Synopsis Designware I2C adapter driver.

This patch depends on the clock patch from Drew Fustini
Link: https://lore.kernel.org/linux-riscv/20240615-th1520-clk-v1-0-3ba4978c4d6b@tenstorrent.com
and the pinctrl patch from Emil Renner Berthing
Link: https://lore.kernel.org/linux-riscv/20240103132852.298964-1-emil.renner.berthing@canonical.com

Changed from v1:
1. Remove redundant example for Synopsis DesignWare-I2C bindings
2. Remove Node Ordering commit as it has already been taken
3. Remove EEPROM label
4. Rebase on pinctrl and clock driver patches
5. Add pinctrl configuration
6. Replaced the fixed-clock with a correct configuration

Changed from v2:
1. Reorder nodes to conserve ascending register node ordering
2. Add support for I2C2 as it probably use the same controller
3. Format comments to match kernel coding style
4. Reorder nodes to conserve alphabetical node ordering
6. Declare I2C2
6. Set pinctrl pull-up resistor to the highest value

Signed-off-by: Thomas Bonnefille <thomas.bonnefille@...tlin.com>
---
Thomas Bonnefille (3):
      dt-bindings: i2c: dw: Document compatible thead,th1520-i2c
      riscv: dts: thead: Add TH1520 I2C nodes
      riscv: dts: thead: Enable I2C on the BeagleV-Ahead

 .../bindings/i2c/snps,designware-i2c.yaml          |  4 ++
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 84 ++++++++++++++++++++++
 arch/riscv/boot/dts/thead/th1520.dtsi              | 60 ++++++++++++++++
 3 files changed, 148 insertions(+)
---
base-commit: c7cdaf7e82015e7037131381bec6ba4b2b1eface
change-id: 20240425-i2c-th1520-fc3ce1a8b472

Best regards,
-- 
Thomas Bonnefille <thomas.bonnefille@...tlin.com>