linux-kernel - Re: [PATCH v2] arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4a1e8cc5-5d82-435d-8a2a-5fab56f85965@linaro.org>
Date: Tue, 18 Jun 2024 13:06:34 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Abel Vesa <abel.vesa@...aro.org>, Bjorn Andersson <andersson@...nel.org>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, Rajendra Nayak <quic_rjendra@...cinc.com>
Subject: Re: [PATCH v2] arm64: dts: qcom: x1e80100: Enable tsens and thermal
 zone nodes



On 6/14/24 12:50, Abel Vesa wrote:
> From: Rajendra Nayak <quic_rjendra@...cinc.com>
> 
> Add tsens and thermal zones nodes for x1e80100 SoC.
> 
> Signed-off-by: Rajendra Nayak <quic_rjendra@...cinc.com>
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> ---

[...]

> +		tsens0: thermal-sensor@...1000 {
> +			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
> +			reg = <0 0x0c271000 0 0x1000>,
> +			      <0 0x0c222000 0 0x1000>;
> +
> +			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;

These are normally wired up through PDC so that the system can shut down
even if CPUSS is off

[...]

> +		cpu0-0-top-thermal {
> +			thermal-sensors = <&tsens0 1>;

Here you have passive trip points with no passive polling, this will
only report threshold crossing events (so e.g. cpufreq throttling will
be broken)

> +
> +			trips {
> +				trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +

[...]


> +
> +		nsp1-thermal {
> +			polling-delay-passive = <10>;

Here you have passive polling, but no passive trip point

> +
> +			thermal-sensors = <&tsens3 2>;
> +
> +			trips {
> +				trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				nsp1-critical {
> +					temperature = <125000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};


The rest looks okayish

Konrad