| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <05df15f61dde81033407d3b4fcb67ee403ecc8db.1718791090.git.u.kleine-koenig@baylibre.com>
Date: Wed, 19 Jun 2024 12:11:43 +0200
From: Uwe Kleine-König <u.kleine-koenig@...libre.com>
To: Fabrice Gasnier <fabrice.gasnier@...s.st.com>,
William Breathitt Gray <wbg@...nel.org>,
Lee Jones <lee@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>
Cc: linux-pwm@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-iio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Thorsten Scherer <T.Scherer@...elmann.de>
Subject: [PATCH v2 2/5] mfd: stm32-timers: Add some register definitions with a parameter
There are some registers that belong together and are numbered from 1 to
4. Introduce a macro definition for these that takes the channel number
as parameter and define the previously available constants using the new
ones.
This allows to simplify some users that up to now use constructs like
TIM_CCER_CC1NE << (ch * 4)
which is an ugly mix of using a predefined value and still knowing
internal details about it.
Note that there are several decrements by 1 involved. These are
necessary because software guys start counting at 0 while the hardware
designer started at 1 (and having TIM_CCER_CCxE(1) be TIM_CCER_CC2E
isn't a sane option). The compiler is expected to optimize these out
nicely.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...libre.com>
---
include/linux/mfd/stm32-timers.h | 60 +++++++++++++++++++-------------
1 file changed, 35 insertions(+), 25 deletions(-)
diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
index 5794110b2b28..92b45a559656 100644
--- a/include/linux/mfd/stm32-timers.h
+++ b/include/linux/mfd/stm32-timers.h
@@ -24,10 +24,11 @@
#define TIM_CNT 0x24 /* Counter */
#define TIM_PSC 0x28 /* Prescaler */
#define TIM_ARR 0x2c /* Auto-Reload Register */
-#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */
-#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */
-#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */
-#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */
+#define TIM_CCRx(x) (0x34 + 4 * ((x) - 1)) /* Capt/Comp Register x (x ∈ {1, .. 4}) */
+#define TIM_CCR1 TIM_CCRx(1) /* Capt/Comp Register 1 */
+#define TIM_CCR2 TIM_CCRx(2) /* Capt/Comp Register 2 */
+#define TIM_CCR3 TIM_CCRx(3) /* Capt/Comp Register 3 */
+#define TIM_CCR4 TIM_CCRx(4) /* Capt/Comp Register 4 */
#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */
#define TIM_DCR 0x48 /* DMA control register */
#define TIM_DMAR 0x4C /* DMA register for transfer */
@@ -41,16 +42,18 @@
#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
#define TIM_DIER_UIE BIT(0) /* Update interrupt */
-#define TIM_DIER_CC1IE BIT(1) /* CC1 Interrupt Enable */
-#define TIM_DIER_CC2IE BIT(2) /* CC2 Interrupt Enable */
-#define TIM_DIER_CC3IE BIT(3) /* CC3 Interrupt Enable */
-#define TIM_DIER_CC4IE BIT(4) /* CC4 Interrupt Enable */
+#define TIM_DIER_CCxIE(x) BIT(1 + ((x) - 1)) /* CCx Interrupt Enable (x ∈ {1, .. 4}) */
+#define TIM_DIER_CC1IE TIM_DIER_CCxIE(1) /* CC1 Interrupt Enable */
+#define TIM_DIER_CC2IE TIM_DIER_CCxIE(2) /* CC2 Interrupt Enable */
+#define TIM_DIER_CC3IE TIM_DIER_CCxIE(3) /* CC3 Interrupt Enable */
+#define TIM_DIER_CC4IE TIM_DIER_CCxIE(4) /* CC4 Interrupt Enable */
#define TIM_DIER_CC_IE(x) BIT((x) + 1) /* CC1, CC2, CC3, CC4 interrupt enable */
#define TIM_DIER_UDE BIT(8) /* Update DMA request Enable */
-#define TIM_DIER_CC1DE BIT(9) /* CC1 DMA request Enable */
-#define TIM_DIER_CC2DE BIT(10) /* CC2 DMA request Enable */
-#define TIM_DIER_CC3DE BIT(11) /* CC3 DMA request Enable */
-#define TIM_DIER_CC4DE BIT(12) /* CC4 DMA request Enable */
+#define TIM_DIER_CCxDE(x) BIT(9 + ((x) - 1)) /* CCx DMA request Enable (x ∈ {1, .. 4}) */
+#define TIM_DIER_CC1DE TIM_DIER_CCxDE(1) /* CC1 DMA request Enable */
+#define TIM_DIER_CC2DE TIM_DIER_CCxDE(2) /* CC2 DMA request Enable */
+#define TIM_DIER_CC3DE TIM_DIER_CCxDE(3) /* CC3 DMA request Enable */
+#define TIM_DIER_CC4DE TIM_DIER_CCxDE(4) /* CC4 DMA request Enable */
#define TIM_DIER_COMDE BIT(13) /* COM DMA request Enable */
#define TIM_DIER_TDE BIT(14) /* Trigger DMA request Enable */
#define TIM_SR_UIF BIT(0) /* Update interrupt flag */
@@ -70,19 +73,26 @@
#define TIM_CCMR_CC4S (BIT(8) | BIT(9)) /* Capture/compare 4 sel */
#define TIM_CCMR_CC3S_TI3 BIT(0) /* IC3 selects TI3 */
#define TIM_CCMR_CC4S_TI4 BIT(8) /* IC4 selects TI4 */
-#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */
-#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */
-#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */
-#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */
-#define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */
-#define TIM_CCER_CC2P BIT(5) /* Capt/Comp 2 Polarity */
-#define TIM_CCER_CC2NP BIT(7) /* Capt/Comp 2N Polarity */
-#define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */
-#define TIM_CCER_CC3P BIT(9) /* Capt/Comp 3 Polarity */
-#define TIM_CCER_CC3NP BIT(11) /* Capt/Comp 3N Polarity */
-#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */
-#define TIM_CCER_CC4P BIT(13) /* Capt/Comp 4 Polarity */
-#define TIM_CCER_CC4NP BIT(15) /* Capt/Comp 4N Polarity */
+#define TIM_CCER_CCxE(x) BIT(0 + 4 * ((x) - 1)) /* Capt/Comp x out Ena (x ∈ {1, .. 4}) */
+#define TIM_CCER_CCxP(x) BIT(1 + 4 * ((x) - 1)) /* Capt/Comp x Polarity (x ∈ {1, .. 4}) */
+#define TIM_CCER_CCxNE(x) BIT(2 + 4 * ((x) - 1)) /* Capt/Comp xN out Ena (x ∈ {1, .. 4}) */
+#define TIM_CCER_CCxNP(x) BIT(3 + 4 * ((x) - 1)) /* Capt/Comp xN Polarity (x ∈ {1, .. 4}) */
+#define TIM_CCER_CC1E TIM_CCER_CCxE(1) /* Capt/Comp 1 out Ena */
+#define TIM_CCER_CC1P TIM_CCER_CCxP(1) /* Capt/Comp 1 Polarity */
+#define TIM_CCER_CC1NE TIM_CCER_CCxNE(1) /* Capt/Comp 1N out Ena */
+#define TIM_CCER_CC1NP TIM_CCER_CCxNP(1) /* Capt/Comp 1N Polarity */
+#define TIM_CCER_CC2E TIM_CCER_CCxE(2) /* Capt/Comp 2 out Ena */
+#define TIM_CCER_CC2P TIM_CCER_CCxP(2) /* Capt/Comp 2 Polarity */
+#define TIM_CCER_CC2NE TIM_CCER_CCxNE(2) /* Capt/Comp 2N out Ena */
+#define TIM_CCER_CC2NP TIM_CCER_CCxNP(2) /* Capt/Comp 2N Polarity */
+#define TIM_CCER_CC3E TIM_CCER_CCxE(3) /* Capt/Comp 3 out Ena */
+#define TIM_CCER_CC3P TIM_CCER_CCxP(3) /* Capt/Comp 3 Polarity */
+#define TIM_CCER_CC3NE TIM_CCER_CCxNE(3) /* Capt/Comp 3N out Ena */
+#define TIM_CCER_CC3NP TIM_CCER_CCxNP(3) /* Capt/Comp 3N Polarity */
+#define TIM_CCER_CC4E TIM_CCER_CCxE(4) /* Capt/Comp 4 out Ena */
+#define TIM_CCER_CC4P TIM_CCER_CCxP(4) /* Capt/Comp 4 Polarity */
+#define TIM_CCER_CC4NE TIM_CCER_CCxNE(4) /* Capt/Comp 4N out Ena */
+#define TIM_CCER_CC4NP TIM_CCER_CCxNP(4) /* Capt/Comp 4N Polarity */
#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12))
#define TIM_BDTR_BKE(x) BIT(12 + (x) * 12) /* Break input enable */
#define TIM_BDTR_BKP(x) BIT(13 + (x) * 12) /* Break input polarity */
--
2.43.0
Powered by blists - more mailing lists