linux-kernel - [PATCH v8 3/4] dt-bindings: ethernet-phy: add optional brr-mode flag

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240619150359.311459-4-kamilh@axis.com>
Date: Wed, 19 Jun 2024 17:03:58 +0200
From: Kamil Horák - 2N <kamilh@...s.com>
To: <florian.fainelli@...adcom.com>, <bcm-kernel-feedback-list@...adcom.com>,
	<andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
	<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <robh@...nel.org>, <krzk+dt@...nel.org>,
	<conor+dt@...nel.org>
CC: <kamilh@...s.com>, <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: [PATCH v8 3/4] dt-bindings: ethernet-phy: add optional brr-mode flag

There is a group of PHY chips supporting BroadR-Reach link modes in
a manner allowing for more or less identical register usage as standard
Clause 22 PHY.
These chips support standard Ethernet link modes as well, however, the
circuitry is mutually exclusive and cannot be auto-detected.
The link modes in question are 100Base-T1 as defined in IEEE802.3bw,
based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR
(1BR-10 in Broadcom documents).

Add optional brr-mode flag to switch the PHY to BroadR-Reach mode.

Signed-off-by: Kamil Horák - 2N <kamilh@...s.com>
---
 Documentation/devicetree/bindings/net/ethernet-phy.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 8fb2a6ee7e5b..0353ef98f2e1 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -93,6 +93,13 @@ properties:
       the turn around line low at end of the control phase of the
       MDIO transaction.
 
+  brr-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Request the PHY to operate in BroadR-Reach mode. This means the
+      PHY will use the BroadR-Reach protocol to communicate with the other
+      end of the link, including LDS auto-negotiation if applicable.
+
   clocks:
     maxItems: 1
     description:
-- 
2.39.2