linux-kernel - [PATCH v5 1/8] cpufreq: amd-pstate: optimize the initial frequency values verification

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f9793f8451c1832e34cc9dc35f89c653b39cfe38.1718811234.git.perry.yuan@amd.com>
Date: Wed, 19 Jun 2024 23:40:12 +0800
From: Perry Yuan <perry.yuan@....com>
To: <Mario.Limonciello@....com>
CC: <rafael.j.wysocki@...el.com>, <viresh.kumar@...aro.org>,
	<gautham.shenoy@....com>, <Alexander.Deucher@....com>,
	<Xinmei.Huang@....com>, <Xiaojian.Du@....com>, <Li.Meng@....com>,
	<linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v5 1/8] cpufreq: amd-pstate: optimize the initial frequency values verification

To enhance the debugging capability of the driver loading failure for
broken CPPC ACPI tables, it can optimize the expression by moving the
verification of `min_freq`, `nominal_freq`, and other dependency values
to the `amd_pstate_init_freq()` function where they are initialized.
If any of these values are incorrect, the `amd-pstate` driver will not be registered.

By ensuring that these values are correct before they are used, it will facilitate
the debugging process when encountering driver loading failures due to faulty CPPC
ACPI tables from BIOS

Signed-off-by: Perry Yuan <perry.yuan@....com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@....com>
Acked-by: Mario Limonciello <mario.limonciello@....com>
---
 drivers/cpufreq/amd-pstate.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 5bdcdd3ea163..d4d7b7cdc4eb 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -924,6 +924,24 @@ static int amd_pstate_init_freq(struct amd_cpudata *cpudata)
 	WRITE_ONCE(cpudata->nominal_freq, nominal_freq);
 	WRITE_ONCE(cpudata->max_freq, max_freq);
 
+	/**
+	 * Below values need to be initialized correctly, otherwise driver will fail to load
+	 * max_freq is calculated according to (nominal_freq * highest_perf)/nominal_perf
+	 * lowest_nonlinear_freq is a value between [min_freq, nominal_freq]
+	 * Check _CPC in ACPI table objects if any values are incorrect
+	 */
+	if (min_freq <= 0 || max_freq <= 0 || nominal_freq <= 0 || min_freq > max_freq) {
+		pr_err("min_freq(%d) or max_freq(%d) or nominal_freq(%d) value is incorrect\n",
+			min_freq, max_freq, nominal_freq * 1000);
+		return -EINVAL;
+	}
+
+	if (lowest_nonlinear_freq <= min_freq || lowest_nonlinear_freq > nominal_freq * 1000) {
+		pr_err("lowest_nonlinear_freq(%d) value is out of range [min_freq(%d), nominal_freq(%d)]\n",
+			lowest_nonlinear_freq, min_freq, nominal_freq * 1000);
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
@@ -962,15 +980,6 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
 	max_freq = READ_ONCE(cpudata->max_freq);
 	nominal_freq = READ_ONCE(cpudata->nominal_freq);
 
-	if (min_freq <= 0 || max_freq <= 0 ||
-	    nominal_freq <= 0 || min_freq > max_freq) {
-		dev_err(dev,
-			"min_freq(%d) or max_freq(%d) or nominal_freq (%d) value is incorrect, check _CPC in ACPI tables\n",
-			min_freq, max_freq, nominal_freq);
-		ret = -EINVAL;
-		goto free_cpudata1;
-	}
-
 	policy->cpuinfo.transition_latency = amd_pstate_get_transition_latency(policy->cpu);
 	policy->transition_delay_us = amd_pstate_get_transition_delay_us(policy->cpu);
 
@@ -1423,14 +1432,6 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
 	min_freq = READ_ONCE(cpudata->min_freq);
 	max_freq = READ_ONCE(cpudata->max_freq);
 	nominal_freq = READ_ONCE(cpudata->nominal_freq);
-	if (min_freq <= 0 || max_freq <= 0 ||
-	    nominal_freq <= 0 || min_freq > max_freq) {
-		dev_err(dev,
-			"min_freq(%d) or max_freq(%d) or nominal_freq(%d) value is incorrect, check _CPC in ACPI tables\n",
-			min_freq, max_freq, nominal_freq);
-		ret = -EINVAL;
-		goto free_cpudata1;
-	}
 
 	policy->cpuinfo.min_freq = min_freq;
 	policy->cpuinfo.max_freq = max_freq;
-- 
2.34.1