| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240620175657.358273-5-piotr.wojtaszczyk@timesys.com>
Date: Thu, 20 Jun 2024 19:56:35 +0200
From: Piotr Wojtaszczyk <piotr.wojtaszczyk@...esys.com>
To: Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"J.M.B. Downing" <jonathan.downing@...tel.com>,
Piotr Wojtaszczyk <piotr.wojtaszczyk@...esys.com>,
Vladimir Zapolskiy <vz@...ia.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Russell King <linux@...linux.org.uk>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Andi Shyti <andi.shyti@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Arnd Bergmann <arnd@...db.de>,
Yangtao Li <frank.li@...o.com>,
Li Zetao <lizetao1@...wei.com>,
Michael Ellerman <mpe@...erman.id.au>,
Chancel Liu <chancel.liu@....com>,
dmaengine@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
alsa-devel@...a-project.org,
linuxppc-dev@...ts.ozlabs.org,
linux-sound@...r.kernel.org,
linux-clk@...r.kernel.org,
linux-i2c@...r.kernel.org,
linux-mtd@...ts.infradead.org
Cc: Markus Elfring <Markus.Elfring@....de>
Subject: [Patch v4 04/10] ARM: dts: lpc32xx: Add missing dma and i2s properties
Adds properties declared in the new DT bindings:
- nxp,lpc3220-i2s.yaml
- nxp,lpc3220-dmamux.yaml
for dma router/mux and I2S interface.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@...esys.com>
---
Changes for v4:
- This patch is renamed from
"ARM: dts: lpc32xx: Add missing properties for the i2s interfaces"
to describe dma changes as well
- Added dmas and dma-names properties in to all node which have dma request signals
- Add bus properties to pl08x dma node since they are removed from platform data in phy3250.c
- Put clock-controller@0 and dma-router@7c under the same syscon, simple-mfd device
Changes for v3:
- Split previous commit for separate subsystems
- Add properties to match dt binding
arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 53 +++++++++++++++++++++++---
1 file changed, 48 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index 974410918f35..c58dc127e59f 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -67,6 +67,8 @@ slc: flash@...20000 {
reg = <0x20020000 0x1000>;
clocks = <&clk LPC32XX_CLK_SLC>;
status = "disabled";
+ dmas = <&dma 1 1>;
+ dma-names = "rx-tx";
};
mlc: flash@...a8000 {
@@ -75,6 +77,8 @@ mlc: flash@...a8000 {
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_MLC>;
status = "disabled";
+ dmas = <&dma 12 1>;
+ dma-names = "rx-tx";
};
dma: dma@...00000 {
@@ -83,6 +87,13 @@ dma: dma@...00000 {
interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_DMA>;
clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ lli-bus-interface-ahb1;
+ mem-bus-interface-ahb1;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
};
usb {
@@ -182,6 +193,8 @@ ssp0: spi@...84000 {
clock-names = "apb_pclk";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux 14 1 1>, <&dmamux 15 1 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -191,6 +204,8 @@ spi1: spi@...88000 {
clocks = <&clk LPC32XX_CLK_SPI1>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux 11 1 0>;
+ dma-names = "rx-tx";
status = "disabled";
};
@@ -206,6 +221,8 @@ ssp1: spi@...8c000 {
clock-names = "apb_pclk";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux 3 1 1>, <&dmamux 11 1 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -215,12 +232,19 @@ spi2: spi@...90000 {
clocks = <&clk LPC32XX_CLK_SPI2>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux 3 1 0>;
+ dma-names = "rx-tx";
status = "disabled";
};
i2s0: i2s@...94000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x20094000 0x1000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_I2S0>;
+ dmas = <&dma 0 1>, <&dma 13 1>;
+ dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -231,12 +255,19 @@ sd: sd@...98000 {
<13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_SD>;
clock-names = "apb_pclk";
+ dmas = <&dma 4 1>;
+ dma-names = "rx";
status = "disabled";
};
i2s1: i2s@...9c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009c000 0x1000>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_I2S1>;
+ dmas = <&dma 2 1>, <&dmamux 10 1 1>;
+ dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -312,21 +343,27 @@ fab {
compatible = "simple-bus";
ranges = <0x20000000 0x20000000 0x30000000>;
- /* System Control Block */
- scb {
- compatible = "simple-bus";
- ranges = <0x0 0x40004000 0x00001000>;
+ syscon@...04000 {
+ compatible = "nxp,lpc3220-creg", "syscon", "simple-mfd";
+ reg = <0x40004000 0x114>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x40004000 0x114>;
clk: clock-controller@0 {
compatible = "nxp,lpc3220-clk";
reg = <0x00 0x114>;
#clock-cells = <1>;
-
clocks = <&xtal_32k>, <&xtal>;
clock-names = "xtal_32k", "xtal";
};
+
+ dmamux: dma-router@7c {
+ compatible = "nxp,lpc3220-dmamux";
+ reg = <0x7c 0x8>;
+ #dma-cells = <3>;
+ dma-masters = <&dma>;
+ };
};
mic: interrupt-controller@...08000 {
@@ -362,6 +399,8 @@ uart1: serial@...14000 {
compatible = "nxp,lpc3220-hsuart";
reg = <0x40014000 0x1000>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 6 1>, <&dma 5 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -369,6 +408,8 @@ uart2: serial@...18000 {
compatible = "nxp,lpc3220-hsuart";
reg = <0x40018000 0x1000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 8 1>, <&dma 7 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -376,6 +417,8 @@ uart7: serial@...1c000 {
compatible = "nxp,lpc3220-hsuart";
reg = <0x4001c000 0x1000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux 10 1 0>, <&dma 9 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
--
2.25.1
Powered by blists - more mailing lists