linux-kernel - Re: [PATCH v3 1/4] dt-bindings: remoteproc: mpss: Document QDU1000/QRU1000 mpss devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <bf61b47d-e375-4f52-b25c-f02a5cd9b6dd@kernel.org>
Date: Thu, 20 Jun 2024 15:20:20 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Komal Bajaj <quic_kbajaj@...cinc.com>,
 Bjorn Andersson <andersson@...nel.org>,
 Mathieu Poirier <mathieu.poirier@...aro.org>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 Melody Olvera <quic_molvera@...cinc.com>
Subject: Re: [PATCH v3 1/4] dt-bindings: remoteproc: mpss: Document
 QDU1000/QRU1000 mpss devices

On 20/06/2024 14:01, Komal Bajaj wrote:
> From: Melody Olvera <quic_molvera@...cinc.com>
> 
> Document the compatible for the component used to boot the MPSS on the
> QDU1000 and QRU1000 SoCs.
> 
> The QDU1000 and QRU1000 mpss boot process now requires the specification
> of an RMB register space to complete the handshake needed to start or

What is RMB?

> attach the mpss.

mpss? MPSS?

> 
> Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
> Signed-off-by: Komal Bajaj <quic_kbajaj@...cinc.com>
> ---
>  .../remoteproc/qcom,qdu1000-mpss-pas.yaml     | 129 ++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml
> new file mode 100644
> index 000000000000..71c5a85b679e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,qdu1000-mpss-pas.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm QDU1000 Modem Peripheral Authentication Service
> +
> +maintainers:
> +  - Melody Olvera <quic_molvera@...cinc.com>
> +  - Komal Bajaj <quic_kbajaj@...cinc.com>
> +
> +description:
> +  Qualcomm QDU1000 SoC Peripheral Authentication Service loads and boots firmware
> +  on the Qualcomm DSP Hexagon core.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,qdu1000-mpss-pas
> +
> +  reg:
> +    items:
> +      - description: Address offset and size for MPSS PAS register set
> +      - description: Address offset and size for MPSS RMB register set

10 words, 8 are entirely redundant. This cannot be anything else than
address offset and size of some register set. Please write efficient and
understandable code. E.g.
"MPSS main Peripheral Authentication Service"
"MPSS something-explain-what-is-rmb"


...

> +        glink-edge {
> +            interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
> +                                         IPCC_MPROC_SIGNAL_GLINK_QMP
> +                                         IRQ_TYPE_EDGE_RISING>;
> +            mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> +            label = "modem";
> +            qcom,remote-pid = <2>;
> +        };

This wasn't tested.

Best regards,
Krzysztof