| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240621134030.243646-5-knaerzche@gmail.com>
Date: Fri, 21 Jun 2024 15:40:30 +0200
From: Alex Bee <knaerzche@...il.com>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>
Cc: devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Alex Bee <knaerzche@...il.com>
Subject: [PATCH 4/4] arm64: dts: rockchip: Add Neardi LBA3368 board
LBA3368 is a RK3368 based industrial board from Neardi.
Specs:
- 1 GB DDR3 DRAM
- 8/16 GB eMMC
- µSD slot
- 100 mbit ethernet (optional 12V PoE)
- Ampak AP6255 Wifi/BT combo
- ADC button
- 4 x USB 2.0 via onboard GL852G HUB connected to SoC's ehci host
- 2 exposed as USB-A
- 2 via 2-mm-4-pin connectors
- micro USB OTG connector
- 2 x UART TTL (2-mm-4-pin connectors)
- CSI connector
- DSI connector
- eDP connector
- HDMI 2.0a output (type A)
- touchpad connector (I2C, 3.3V)
- ALC5640 audio codec
- combined headphone/microphone jack
- speaker connector pads
Signed-off-by: Alex Bee <knaerzche@...il.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3368-lba3368.dts | 666 ++++++++++++++++++
2 files changed, 667 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 85d949f2c909..90f5172f37e6 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lba3368.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
new file mode 100644
index 000000000000..ec7d6e7b2cf5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/rt5640.h>
+#include "rk3368.dtsi"
+
+/ {
+ model = "Neardi LBA3368";
+ compatible = "neardi,lba3368", "rockchip,rk3368";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio0;
+ rtc0 = &hym8563;
+ rtc1 = &rk808;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ adc-key {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ poll-interval = <100>;
+ keyup-threshold-microvolt = <1800000>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ dais = <&i2s_8ch_p0>;
+ hp-det-gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ label = "alc5640";
+ routing = "Mic Jack", "MICBIAS1",
+ "IN1P", "Mic Jack",
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR",
+ "Speakers", "SPORP",
+ "Speakers", "SPORN",
+ "Speakers", "SPOLP",
+ "Speakers", "SPOLN";
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speakers";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_det>;
+ };
+
+ dc_12v: dc-12v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ext_gmac: gmac-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
+ hub_avdd: hub-avdd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "hub_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power-led {
+ pinctrl-0 = <&power_led>;
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 RK808_CLKOUT1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on>;
+ };
+
+ vcc_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vcc_lan: vcc-lan-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ regulator-always-on;
+ };
+
+ vcc_otg: vcc-otg-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd10_usb: vdd10-usb-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd10_usb";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ vin-supply = <&vdd_10>;
+ regulator-always-on;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+ bus-width = <8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_18>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ cap-mmc-highspeed;
+ non-removable;
+ no-sd;
+ no-sdio;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "input";
+ phy-handle = <&phy>;
+ phy-mode = "rmii";
+ phy-supply = <&vcc_lan>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ max-speed = <100>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <1000000>;
+ reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&phy_rst>;
+ };
+ };
+};
+
+&io_domains {
+ audio-supply = <&vcca1v8_codec>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc_18>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vdd1v8_wl>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupts-extended = <&gpio0 RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "xin32k_wifi_bt";
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &pmic_sleep>;
+ system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log: DCDC_REG2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <6001>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-suspend-microvolt = <1000000>;
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-suspend-microvolt = <3300000>;
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-suspend-microvolt = <1000000>;
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd1v8_wl: LDO_REG4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vdd1v8_wl";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+
+ regulator-state-mem {
+ regulator-suspend-microvolt = <1800000>;
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_tp: SWITCH_REG1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+
+ regulator-state-mem {
+ regulator-suspend-microvolt = <3300000>;
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_sd: SWITCH_REG2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+
+ regulator-state-mem {
+ regulator-suspend-microvolt = <3300000>;
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_IN1P>;
+ realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_IN1N>;
+ realtek,in1-differential;
+ #sound-dai-cells = <0>;
+
+ port {
+ rt5640_p0_0: endpoint {
+ remote-endpoint = <&i2s_8ch_p0_0>;
+ };
+ };
+ };
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
+ };
+
+};
+
+&i2s_8ch {
+ status = "okay";
+
+ i2s_8ch_p0: port {
+ i2s_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&rt5640_p0_0>;
+ };
+ };
+};
+
+&pinctrl {
+
+ bt {
+ bt_host_wake: bt-host-wake {
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ bt_wake: bt-wake {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ power_led: power-led {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ phy {
+ phy_rst: phy-rst {
+ rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pmic_sleep: pmic-sleep {
+ rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_reg_on: wifi-reg-on {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ hp_det: hp-det {
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake: wifi-host-wake {
+ rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmu-supply = <&vcc_io>;
+ vop-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ vqmmc-supply = <&vdd1v8_wl>;
+ vmmc-supply = <&vcc_io>;
+ assigned-clocks = <&cru SCLK_SDIO0>;
+ assigned-clock-parents = <&cru PLL_CPLL>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ no-sd;
+ no-mmc;
+ non-removable;
+ sd-uhs-sdr104;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupts-extended = <&gpio3 RK_PA6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4 &sdmmc_cd>;
+ cap-sd-highspeed;
+ disable-wp;
+ no-mmc;
+ no-sdio;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rk808 RK808_CLKOUT1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
+ vbat-supply = <&vcc_io>;
+ vddio-supply = <&vdd1v8_wl>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake &bt_wake &bt_reg_on>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub@1 {
+ compatible = "usb5e3,610";
+ reg = <1>;
+ vdd-supply = <&hub_avdd>;
+ };
+};
+
+&usb_otg {
+ vbus-supply = <&vcc_otg>;
+ vusb_a-supply = <&vcc_io>;
+ vusb_d-supply = <&vdd10_usb>;
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
2.45.2
Powered by blists - more mailing lists