[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <62bf3lmbj3gf23x7rgmzhfa7gmpjmwelhspy66j326pudjqlqx@k6owdffe55mz>
Date: Sat, 22 Jun 2024 00:24:10 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
Cc: sboyd@...nel.org, andersson@...nel.org, bjorn.andersson@...aro.org,
david.brown@...aro.org, devicetree@...r.kernel.org, jassisinghbrar@...il.com,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-remoteproc@...r.kernel.org, mark.rutland@....com, mturquette@...libre.com, ohad@...ery.com,
robh@...nel.org, sricharan@...eaurora.org, gokulsri@...eaurora.org
Subject: Re: [PATCH v9 0/8] remoteproc: qcom: q6v5-wcss: Add support for
secure pil
On Fri, Jun 21, 2024 at 05:16:51PM GMT, Gokul Sriram Palanisamy wrote:
> IPQ8074 needs support for secure pil as well.
> Also, currently only unified firmware is supported.
> IPQ8074 supports split firmware for q6 and m3, so
> adding support for that.
>
> changes since v8:
> - Rebased on top of Linux 6.10-rc4
Why do you have so many dead email addresses in you To/Cc lists?
>
> Gokul Sriram Palanisamy (8):
> remoteproc: qcom: Add PRNG proxy clock
> remoteproc: qcom: Add secure PIL support
> remoteproc: qcom: Add support for split q6 + m3 wlan firmware
> remoteproc: qcom: Add ssr subdevice identifier
> remoteproc: qcom: Update regmap offsets for halt register
> dt-bindings: clock: qcom: Add reset for WCSSAON
> clk: qcom: Add WCSSAON reset
> arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
>
> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 80 +++++++++
> drivers/clk/qcom/gcc-ipq8074.c | 1 +
> drivers/remoteproc/qcom_q6v5_wcss.c | 162 +++++++++++++++----
> include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 +
> 4 files changed, 212 insertions(+), 32 deletions(-)
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists